My ipad appears frozen, voice over on, screen lock and passcode field zero values
my ipad appears to be frozen, cannot sign in, screen blank, voice comes on saying passcode field zero values, screen lock, and voice over on.
Have you tried to reset it?
Hold down on the home and sleep/power buttons until the Apple logo shows up.
Let the iPad reboot.
No data should be lost.
Similar Messages
-
My iPhone 6 will not let me past passcode page siri says Passcode sealed, and screen locked, tried soft shut down white apple on dark background then dark apple on white background when rebooted, then voice comes on but I can't gety in, any help out there?Kathleen
Zauner
I'm sorry to hear about the trouble getting into your iPhone 6! I definitely want to ensure you're connected once again. I greatly appreciate the efforts you've taken. Have you been able to connect to a computer with the latest version of iTunes installed and connect the phone in Recovery Mode? http://bit.ly/11gOy7X
RuthW_VZW
Follow us on twitter @VZWSupport -
IPhone can be shut down with screen locked and passcode set
Having Passcode Lock on, I can power off the iPhone when the screen is locked. Is this intended or is it a bug? It can be problematic to use Find My iPhone if someone steals somebody's iPhone and shuts it down.
The iPhone of my wife is stolen last week and didn't had a always online data plan. So there was in some way nothing we could do. For that reason I shut down the simcard and via icloud.com sent a message to the iphone and placed it in restore mode.
In this case the poweroff passcode requirement didnt had any use but it would be very much of use when someone has an always online connection. That way if it gets stolen its traceable as long as the battery lasts. Letting the iPhone reset itself after 10 false attempts to login is stupid. That way its not even traceable anymore.
As far as I know with iOS7 there will be a apple id login required before you can restore the iphone! I don't know what will hebben if the home and powerbutton will be used at the same time... But it makes it a little harder to steal a phone and sell it.
Also, if the iphone can be connected to an apple ID you could do a lot more, for instance:
Mark the iphone as stolen. When the phone is in some way restored, the imei number is marked in a database and the iphone will be traced through wifi or 3g without the new owner knowing. If you want you can send messages or shut it down. You can only mark a phone as stolen if it is connected to your apple ID. So if you sell the phone, you want to restore it, restoring it requires a login with your apple id, after it has been restored the iphone is "free of apple id" and cant be marked as stolen. When somebody, the new owner, connects it with his apple id, its his iphone. -
My ipad is frozen with a black screen with a picture of a cord leading to the itunes icon. i tried to shut down my ipad but the turn off icon wont show instead the itunes icon with the cord keeps coming out everytime i open my ipad. what should i do ? and i dont want to lose my pictures, videos and other documents in my ipad please help me ....
I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
Take a look at this.
http://support.apple.com/kb/ht1808 -
In my iphone6, voice over got switched on and screen got locked. Phone is not responding for slide but only responding for double tap. Phone is not accepting my passcode as I double tap in passcode screen. Single tap just gives a voice over. pls help me to unlock the screen and switch off voice over
Thanks a lot Sted !! It worked
-
I just want to get started with my new out of the box MacAir. I canot move beyond the voice over welcome screen. It seems to be stuck. What do I need to do to advance out of it?
Bt seem to have got their act together. After six days! All of a sudden it works. What a surprise, shame their help desk would not admit anything was wrong.
-
my phone just randomly got the voice over back on and wont let me scroll up and down and wont shut off voice over---tried shutting down and back on but didnt help---------------help!!!!!!!!!!!
Try this...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
Restart / Reset
http://support.apple.com/kb/ht1430 -
TS2634 ipad screen lock and ask for passcode
my ipad screen lock and ask for passcode, which i don't remember. my kid change the passcode. Aslo, it talks for passcode 4 values require.
Is there any reslove for this issue?? Thank you.iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
my iPad is frozen.. it won't shut off.. i can't do a forced restart by holding the sleep/wake and home button.... it doesn't respond to that either.. i can't connect it to iTunes because it needs passcode entered but again the iPad is frozen so i can't input the passcode… I also can't do recovery mode as the ipad won't shut down for me to do a recovery mode.... HELP
Erase iPad and setup iPad from scratch
1. Launch web browser on your computer
2. Sign in to www.icloud.com
3. Tap on Find My iPhone
4. Select the iPad to be erased
5. Tap Erase iPad
6. Message: All your content and settings will be erased. An erase iPad cannot be located or tracked
7. Tap Erase
8. Enter Apple ID and Password
9. Tap Next
10. Enter a phone number where you can be reached. It will be shown on your iPad after it has been erased
11. Enter phone number
12. Tap Next
13. Tap Erase iPad
14. This message will be shown on your iPad after it's been erase "This iPad has been lost. Please call 12345678"
15. Done
16. Erase started
16. OK
17. Remove from Account (this will allow iPad to be activated and used by another person)
Setup wiped iPad
1. Slide to unlock
2. Select English
3. Select Country
4. Choose Wi-Fi Network
5. Enter Wi-Fi password
6. Activate iPad
7. Apple ID and Password
8. Apple ID and Password
9. Enable Location Service
10. Select "Restore from iCloud Backup"
11. Enter iCloud password
12. Agree to Terms and Conditions
13. Choose backup
14. Select "Backup file in iCloud"
15. Hello (Welcome)
16. Slide to unlock
17. Update Completed
18. Continue
19. Enter Apple ID and Password
20. Updating iCloud
21. Select "Don't Add Passcode"
22. Welcome to iPad
23. Get Started
24. Restore Apps and Media. Your settings have been restored. Connect to power to save battery while apps and media are downloading
25. Sign in to iCloud -
My ipod touch is frozen on the disabled screen because my passcode was entered wrongly numerous times, how do I fix it?
The options are listed at the bottom of this article: http://support.apple.com/kb/HT1212. The best option is the first (listed under "If you have previously synced with iTunes"): back it up and restore it on the last computer it was synced with after setting the passcode.
-
How can I use screen lock and auto-logout together?
I'm managing a network of Macbook Pros at an elementary school and would like to use both the screen lock and automatic logout features together, but this does not seem to work for some reason.
What I would like to happen:
After 5 minutes: locked screen
After 30 minutes: automatically logged out
The automatic logout works when I don't have locked screen enabled, but once I turn on locked screen, the account never gets logged out. It does work if I only enable the screen saver to appear after 5 minutes. The computer isn't going to sleep so I'm not sure what is preventing the automatic logout.
Any ideas on how to resolve this issue?You can use LabVIEWs UDP functions to communicate with SNMP devices. The tedious part is converting the MIB information into the required hex message.
There is also a problem in using the UDP functions on port 161 (default SNMP port) if the Windows SNMP services is running. -
Screen locked and dont know password
My screen locked and i have never set up password. Now i cant get my ipod to work without password.
If all of the content of your iPod is still on your computer in iTunes, you can restore the iPod in iTunes and it will erase all of the content and restore all the factory settings (including the password). Once this is done, you can sync all the content back on. If some of what's on your iPod is no longer on your computer, you will need to find that content (add from your own CDs or download songs from the iTunes store) if you still want it.
-
Hi All,
Is there any event in windows universal app (wp8.1&win8.1) that fires when screen locked and unlocked with in the app
Right now, I am using this below mentioned event
Window.Current.VisibilityChanged +=
CurrentWindow_VisibilityChanged;, but it fires even when app relaunches.
Please anybody help me to solve this issue.Thanks for your early reply. but, those are system triggers used in background task. I want an event that fires when screen gets locked. like this...(a networkstatuschangedevent)
NetworkStatusChangedEventHandler
networkStatusCallback =
newNetworkStatusChangedEventHandler(OnNetworkStatusChange); -
Why do I have to sign in after screen lock and/or sleep?
I use Skype, YIM, Facebook, etc., and I want to stay signed in all the time. Whenever my ipod is awakened from sleep or brought out of screen lock, everything is signed out and has to sign back in. I miss calls and messages this way. I appreciate the screen lock and wish to keep it operating, so how can I keep everything signed in after the screen locks?
You need to change the settings in each app. I don't use YIM, but Skype and Facebook I do use.
Under Settings >> Skype, make sure "Sign In Automatically" is on, "Go Offline" is set to never, and notifications are active. The "Don't Auto-Lock" only applies to calls made.
Under Settings >> Facebook, tap "Push Notifications" and make sure the notifications you want to be notified about are set to "On".
Under Settings >> Notifications, make sure they are on, and the types of alerts are on (Badges, Alerts, and/or Sounds).
Under Settings >> General >> Auto-Lock, make sure it is set to "Never".
For some reason, there are a couple of things that still won't happen correctly: Facebook will place a badge for activity, but it still tends to take minutes (or may NEVER) update your page to show you what occurred (I often get Notifications on wall posts that never show in the notification tray). Skype WON'T notify you of a call unless you are actively on the iPod, but you can receive messages, so I would tell whoever calls you to message you first to make sure you are actively able to receive the call (since any chat messages will alert you). -
My deceased brother's IPad was given to me but it is locked and passcode protected. I do not want access to the data on it, but would like to be able to use it. Can it be unlocked and reset to factory settings? Thanks!
You can try this: If you can't update or restore your iOS device
If he had not turned on Find My iPad then it will work, if he had you will run into Activation Lock. If you do run into it you can take a copy of the will (or probate finding if he died without one) and/or a Letter Testamentary and ask if they can look up where he purchased it. If they can, and you have the other documents, they can reset it for you.
Maybe you are looking for
-
Importing Microsoft Word doc to InDesign with embedded EPS art ~ scaling issue
Hi, my workflow calls for creating content in Microsoft Word 2010 with embedded EPS art, in this case MathType 6.7a math objects. When I import these manuscripts (after saving as Word 97/2003 format) into my Adobe InDesign CS5.5 templates, the embedd
-
Connect AirPort Extreme Base Station to air card
How do you connect AirPort Extreme Base Station to Verizon Air Card?
-
Where can I change desktop for anonymous user ?
Hello. Where can I change desktop for anonymous user ? I'd like to change it in the same manner as sampleportal desktop (with amconsole) , but I did not found it in the amconsole. If you know, please, tell.
-
Getting random errors of audienceURI must be specified in SamlSecurityToken
Getting this exception after login: Exception: ID1032: At least one 'audienceUri' must be specified in the SamlSecurityTokenRequirement when the AudienceUriMode is set to 'Always' or 'BearerKeyOnly'. Either add the valid URI values to the AudienceUri
-
How to make a bootable backup of the operating system
Hi, I am given the task to make a bootable backup of the OS (Solaris 9). I know I can use ufsdump to backup the system in single user mode. However, to make a backup bootable, shall I backup the file system to a DVD? Any advice will be greatly apprec