My ipad apps wont update. When i press update it just opens the app.
Whenever i press update it just opens the app. The update all button is not also available
Try turning it off for 20 seconds and then on
Similar Messages
-
my ipod touch 5 won't let me update my apps, when I click on update it just opens the app. also the update all at the top isn't highlighted so I can't click on that.
Try turning it off for 20 seconds and then on
-
I have an iphone 5, I have many apps to update. when I open App store and go to update app, it just opens the app. I closed down all my apps and restarted my phone. please help. thanks.
I noticed the same problem yesterday on my iPhone 5 (7.0.3)
Update all option was greyed out and attempting to update individually just opened the app.
I did a hard reset and bingo, worked first time. -
Clicking update just opens the app?
Snapchat recently sent me a message saying that soon my version of the app will stop working, and that I need to update the app. However, when I go to the app store and to updates and click the update button, my phone just opens the app and nothing else happens. This happens with all of my apps.
Could it be that I don't have ios 8?
Or that my phone doesn't have enough storage (1.5 GB available)?
Or is it that my phone is older (4S - 14 months old)?
I have a friend who has a 4s iPhone without ios 8 and who updated her apps just fine...so any ideas on what's causing the problem and how I can fix it?Free up some space, a 4S is still a good phone and you can update it to 8.2 just fine. If that doesn't work, delete the app. Hold it until it wiggles, click X, delete. Go back to app store and redownload it. Should work. Need to back up that iphone, there are several different ways to back your pictures or videos.
-
After upgrade to ios5, none of the apps will load. Touching an icon does not open the app; it just blinks and returns to the screen.
Go to the App Stor and download an app- any free app will do, it doesn't matter.
Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
And no, you don't have to keep that free one you just downloaded. You can delete it if you don't want it. -
Hi, I have and iPhone 4 and am still on iOS7
The app store says I have updates waiting for about 10 apps, usually I would just 'update all' but that is grey/not 'pressable'
When I press 'update' on the apps individually all it does it open the app/take me to it.
Have tried powering off and on again but no luck, have no idea what to do, any help appreciated.Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept them into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116557) -
IPhone 5s won't install updates, when I try, it just opens the app
I have an iPhone 5s. Whenever I press the update button, the app doesn't update. The update button is working more as a button that opens the specific app I'm trying to update. I am very frustrated. I had an iPhone 5s with a previous phone company and didn't experience this issue.
To take advantage of All the Features in iOS 5 See Here
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
I bought a I pad mini and set it up today and now it won't let me sighn in to the AppStore my password and user name is right but it gives me a unknown error pop up. How do I fix this.?
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I Have tried everything and it still won't let me open anything in Safari. I have reset the Mac and router. It's just not working.
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
If that's not what you see, post the contents of the window. -
I tried to download a Cisco website application. The app did not download and it is stuck on the window where it has the option of open.....it will not open. The problem is that I cannot get the window off the screen and I can't get back to the App Store home page! Help! Thanks
Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
The benefit of app tab is to save this buttons to use them again later on.
when i close the browser they are lost.Thank you so so much! I would have never thought to move apps around on my iPad (truth be told the newsstand app is the most useless for me, I wish I could just delete it) and was super happy that iOS 7 allows you finally put that sucker in a file along with the rest of the junk apps I never use.
Solved he issue! I can upload videos to my vlc for iOS player once again! -
See Subjekt.
I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.
-
I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
Any ideas ...Please!Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?
-
Im trying to update my apps from the ipad in the app store section and when i press update the ipad tells me that im not connected to the itunes store??
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip..
Maybe you are looking for
-
Downloading of emails via webmail, iPhone and Mac Mail
I currently access emails from my ISP via three avenues. I use webmail when I'm in the office, iPhone on the go and Mac Mail at home. However, I will end up seeing the same emails three times. Even after deleting unwanted emails from my webmail, they
-
Column contents separated by commas using a select
Hi, My SQL query output looks like this Host Name IP Address List Primary Address IEGMEUDUB--01R 135.32.248.132 135.32.248.132 IEGMEUDUB--01R 135.42.164.54 135.32.248.132 IEGMEUDUB--01R 135.42.165.198 135.32.248.132
-
Guys, Here is my scenario...We have a decentralized warehouse systems. I created a STO order and created an outbound delivery and processed that delivery in our Warehouse. After that delivery is updated back with the status saying it is completed. No
-
Using Attachment Interface in Module and Calling other module conditionaly
Hi Experts, I am currently working with a module where I need to work with attachments coming with emails. Can any one please help me , how can I use the different methods of this interface? My requirement is to read only the content type of the atta
-
Hello, In the context of an upgrade of e-recruiting (from 3.0 to 6.0) we installed a new Trex (release 7.10). I recreated all indexes and I have problems with two files. This files are uploaded by applicant and they are encrypted. I have errors into