My iPad can find a network but will not connect to internet ever since i did last software update
Ever since the last software update my iPad will not connect to the internet. I can see the networks and have great signal strength but it just won't connect. Other iPad users who have not done the update can sit next to me and connect with no issues. My iPad is only a month old! not good enough!
There are no changes to WiFi in the last two updates 4.3.4, and 4.3.5. These contained only fixes for a malicious PDF file handling problem, and a security certificate handling problem.
Try using Settings > General > Reset > Reset network settings to see if that fixes your problems.
Similar Messages
-
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
Photosmart 5520 connect to wireless network but will not connect to internet
My Photosmart 5520 printer connects to my network just fine and prints from all my computers just fine. But when I attempt to print through ePrint or google print, nothing happens. When I hit the eprint bottom on the front of the printer, it tells me the printer is not connected to the internet.
Oh, you can check this thread about the same issue
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Unable-to-connect-to... -
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Just got comcast triple play. Original ipad sees network but will not connect.
Just got comcast triple play. Original ipad sees network but will not connect.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My ipad is showing a wi-fi network, but will not connect. I've tried turning off and on, and went through the troubleshooting, still nothing. Then I reset network settings as suggested, still nothing. Any ideas?
that is the router I am on now reply to this message from my desktop, the router seems to be working fine, thanks
-
Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.
I had the same problem. I did the reset networks on my iPhone & it did not work. My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help. I did that & it solved the problem. I have not had the problem since.
-
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
"My Windows 7 Dell will see Airport network but will not connect"
"My Windows 7 Dell will see Airport network but will not connect" Can anyone help me out with this?
Thanks,Yes, I have the Airport utility installed on the Windows 7 dell.
-
Airport Express/Mac work fine, Vista PC sees network, but will not connect
I have been working on this for two days. What can I do? I have the latest firmware on the airport express and my utilities are up to date on both PC and Vista (airport s/w ver 5.3.2). It all worked before. Also, my brother wireless printer sees network, but will not connect.
I have a similar issue. I have an AP Express set up for WPA2 Personal, G only. My Mac mini connects fine. My Dell mini9 with XP connects fine. My Dell desktop with Vista64 connects fine, but is local only, no internet.
I have completely reset the AP to factory settings and reconfigured it using the Vista machine, but still no luck. What is going on? Anyone? -
My Apple TV recognises my wifi network but will not connect to it, when I enter the password
Help please - my Apple TV recognises my wifi network but will not connect to it, when I enter the password - it just says 'there was a problem connecting to the network - check your settings and try again (5).' What should I do next?
people repport that apple products in general I believe have problems with support for the outdated encryption type called wep encryption which is also pretty useless and easy to break
if you use that try disabling it or changing to wpa encryption
if you use MAC address filtering in your router then you need to add the appletv's MAC address to the positive list -
My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?
Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems. -
Hi
I just got new router and had to reset my network settings on IPad. Since then, my ipad will connect onto the main home network but will not attach to my extension booster (netgear) which is linked to the home network. It will also not attach to networks outside my home that it has previously worked with. i have reset the settings again, powered off and on again, updated to the latest IOS update, but nothing is working. Please help, as I can only use wifi in a few rooms in my house and i do not have 3G on my my ipad.Did you try forgetting the network and starting all over again?
Settings>WiFi>Network Name>Tap the blue arrow>Forget this Network. Restart your iPad and then try joining again.
Try rebooting your router. Even though everything else may be connecting to your Network, it might help with the iPad. Unplug the router for about 30 seconds and then plug it in again.
Reset Network settings on the iPad?
Settings>>General>Reset>Reset Network Settings. You will have to start all over again, Tap WiFi in the settings, find your network and enter the password. -
Despite trying the recommended trouble shooting options, my I pad will not connect to our home Wi-Fi network. The problem only started occurring this morning, and although it will recognise the Wi-Fi network, it will not connect.
Any other options I can try????Try rebooting the router. Just pull the power for a few seconds. No settings are lost.
-
Green light on Airport Extreme but will not connect to internet
I have tried restarting computer and Airport Extreme but it will not connect to internet. Unit has been working great up until now. I have made no changes in system.
This Airport/time machine is 2009 version.The Cisco DPC 3010 is a cable modem, so you will need to let the modem completely reset before you connect it to the AirPort Extreme.
It may be necessary to perform a Factory Default Reset on the AirPort Extreme and reconfigure it, but we will try a shortcut first to see if that can be avoided.
Power off the entire network.....all devices....modem, AirPort, computers, mobile devices, etc in any order that you want.
Be sure to disconnect the power cable on the modem, either on the back of the device or pull the power cord from the wall AC jack
Leave everything powered off for at least 30 minutes. Longer is better, as it sometimes takes the equipment back at the ISP longer to completely reset and issue a new fresh IP address to the modem.
After the wait period, power up the modem first, and let it run for at least 5 minutes by itself. If your modem documentation states that the modem should be powered up for 15 minutes, then go with 15.
Power up the AirPort Extreme next, and let it run a few minutes
Then power up other devices one at a time about a minute apart
When the entire network is back up, check the network.
It this does not work, you will have to start over again as above, except this time you will need to perform a Factory Default Reset on the AirPort Extreme.
To do that, power off the AirPort Exterme for a few minutes
Hold in the reset button on the back of the Extreme.....and keep holding it in for an additional 9-10 seconds while you simultaneously plug the power back into the Extreme
Release the reset button after the hold period, and allow a full minute for the Extreme to restart to a slow, blinking amber light
Power off the AirPort now, and start it back up in the proper sequence
If things still don't work, then you likely have a defective AirPort Extreme that will need to be replaced.
Maybe you are looking for
-
Upgrading from 8.5 to 11
Hello, The company I am working at has a large number of reports that have been created using CR 8.5. Due to a planned upgrade of the ERP system, CR needs to be upgraded to CR 11. Will the reports that have been created seamlessly work with CR 11 or
-
WLC 4402-50 with ACS 3.3
Hi, We want to use ACS to authenticate an ssh or http connection to a WLC 4403-50 4.2.99 using TACACS+. On our ACS 4.2 test server it works fine. Configured identically on an ACS 3.3 appliance we are not able to log in although we do see a successful
-
Cómo hacer la conversión de audio a texto con Adobe Premiere CC 2014
Hola, soy nueva en el foro y no sé si esto va aquí. Si no va aquí, me disculpo por anticipado. Es la primera vez que instalo Premiere CC 2014 y cuando he ido a transcribir un audio no me aparecía la opción: analizar contenido. ¿Por qué? ¿que tendría
-
I've recently had to reinstall my system from the OS on up. I have my iPhoto library on an external hard drive but the re-installed version of iPhoto doesn't know where it is. How do I tell iPhoto to search for the photo library on the external drive
-
CS3 PMS Colors Inaccurate...
i originally created some artwork in CMYK, the printer suggested i make it a 2 color job to get better color (some of my cmyk colors were out of their press' gamut). Since i don't have a Pantone's Tints Book, i had to rely on photoshop for matching t