My iPad can play only 1 speaker via headphone jack after iOS7

My iPad 4 can used headphone or speaker via headphone jack in very good condition until I upgrade iOS7.
Now the sound come out only 1 side, another is nothing.
I test it with my earpod and speaker, both are the same.

Same. I belive you posted about this in my thread. This is really frustrating!

Similar Messages

  • My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
    This has been a fairly common problem, but in most cases it is easily cured as described above.

  • I want to play AVCHD videos in ipad from my JVC camcorder.which is the best tool for converting the avchd videos to formats that ipad can play?

    I have a JVC HD camcorder that creates videos in AVCHD format that ipad cannot play. Which is the best tool to convert these avchd videos to the format ipad can play?

    Airplay is a wireless streaming protocol. It allows content to be pushed from the iPad through the Apple TV onto your connected HDTV.
    If she wants to see the iPad displayed on the big screen and/or play games that involves mirroring. As long as it's an iPad 2 (or later) then you will be fine. More info on both has been referened below
    http://support.apple.com/kb/HT4437?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/ht5209

  • How do I play audio from my headphone jack and internal speakers?

    How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

    Hello,
    If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

  • New iPad, just purchased, has no sound, headphone jack is okay, tones do work from iPad speakers, but unable to play any iTunes

    New ipad, purchased today, unable to hear itunes, headphones jack works, can hear the alarms through the speakers, unable to have any itunes play through the speakers.

    Erik-from-Poulsbo wrote:
    New ipad, purchased today...
    Contact Apple.  800-275-2273 in the U.S.A. and I think Canada.

  • Sounds still plays through speaker with headphones plugged in

    I've recently been having problems with my sounds. I would plug headphones into one of headphone jacks on my HP dv6tse laptop and i would hear sounds through my headphones as well as my speakers. So basically I'm getting sounds from my headphones as well as my speakers at the same time when only my headphones should be getting the sound. Is this a hardware problem or some kind of settings problem? Please help!

    same issue, i have a hp pavilion dv6 6169sl
    no answers?

  • Sound not playing through speaker or headphones

    Hi all
    My iPhone 4 has developed a problem - I get no sound at all, not through the speakers, or by plugging in the headphones.
    No app sounds, no key sounds, no phone call sounds - nothing!
    I've tried cleaning all the fluff out of the headphone jack and the dock connector, I've also tried a full restore.
    One other odd thing that happens is that if I open the Music app, it has now started cycling forward through the track listing by itself
    Any ideas?

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting the phone, but it can cure some glitches.
    If this does not work, try to set it up as new device without using the latest backup, to rule out a software issue.
    If still no sound, you might have a hardware problem, and the phone needs to be serviced.
    iPhone - Contact Support - Apple Support

  • HT4623 My iPad 2 audio only works with headphones and orientation does not work at all

    My iPad 2 volume button does not work with the integrated speakers of my iPad, once a headphone is connected to the jack output of my iPad the OSD volume displays fine and works to the external headphone but once the headphone jack is removed, there is no more a volume bar and the side volume buttons don't work at all, this has affected the screen orientation as well, screen does not orientate  as well,
    Please help

    If you deleted files from the operating system, you wrecked your installation and the first thing you need to do is either restore those files from a backup or reinstall the OS. Doing that is never the solution to any problem. Back up all data before making any changes.

  • Sound Output - Internal Speaker and Headphone Jack?

    I just installed my new iMac, which replaced my Mac Mini. I hook my Mac to my stereo via the headphone jack for playing iTunes. But most of the time I don't have the stereo on.
    is there a way to keep the headphone jack plugged in and still have audio come out the internal speaker? Basically send audio output to both the internal speaker and the headphone jack at the same time?
    On the Mac Mini this wasn't an issue because I had a splitter that ran from the mini to my monitor speakers and to my stereo.
    Thanks!

    Hi, you can get the internals to give notice of emails & actions..externals for any other sound..
    Sadly your wishes on this matter will not come to fruition...L

  • Cannot output audio via headphone jacks with Mac Mini (2012) and Boot Camp

    Hi all,
    I have a brand new (2012) Mac Mini with a Boot Camp partition running Windows 7.  It's connected directly to an HDTV via HDMI cable.  I have external speakers hooked through the headphone jack on the back.  The speakers work fine if I'm in the Mac environment, but I cannot get the audio output to go through the headphone jack while in Boot Camp/Windows- it will only go through the speakers on the TV.  Any suggestions?  I think I've downloaded every driver I can think of, and the installation of Windows on the Boot Camp partition went well otherwise.  Thanks.
    John

    Nevermind, I was missing one driver.  Installed it, fixed.

  • Connect Imac to Stereo via Headphone Jack & 2nd Stereo via Airport Express

    I have two whole-house stereo systems; one serving the lower level (basement) of my house and another serving the first and second floors. My iMac is on the lower level. The house was prewired with two coax cables (standard cable TV-type cables) from the area behind my stereo on the lower level to the room where my iMac is located. Using adapters from Radio Shack, I was able to directly connect my iMac to my home stereo on the lower level. I can currently play my iTunes on my lower level stereo by plugging the cable into the headphone jack on my iMac.
    I am set up with a wireless network using a Linksys WRT54G. I would like to be able to also stream music from iTunes on my iMac to my home stereo on the first floor. I realize I can do this with the use of Airport Express.
    My goal is to be able to play the same music from iTunes on my iMac on both stereos simultaneously. My question is; if I have my lower level stereo connected to my iMac via the headphone jack, will I still be able to stream the same music from iTunes to my upper level stereo via Airport Express? I'm concerned that by connecting the lower level stereo to the headphone jack, the music will not be able to be streamed wirelessly to the upper level stereo.
    Thank you in advance for your time.
    iMac 24 in.   Mac OS X (10.4.8)   Wireless keyboard & mouse, Linksys WRT-54G connected wirelessly

    Hi.
    Assuming your iMac is no more than 50 feet from where you intend to locate the express then:
    You will need to configure your airport express to join your current wireless network in client mode (otherwise you won't be able to use the internet and the express at the same time).
    http://docs.info.apple.com/article.html?artnum=302153
    In iTunes there is an option to select multiple speakers. Thus you select this and then check the desired options. Hence you can have music coming out of the speakers/hadphone jack on your iMac AND out of the speakers connected to the airport express.

  • Can you manually disable the headphone jack on Macbook Pro?

    I recently got the tip of a speaker plug stuck into the headphone jack of my 13' Macbook Pro. I tried various things and finally decided that I'd take it in to get repaired. I took it into a store called Jump+ which is an official apple retailer in my town (as we have no nearby apple stores). They attempted to take it out and succeeded at doing so except for a tiny piece of metal (copper) which is in the very tip of the headphone jack.
    This causes me to not have sound or use of headphones.
    I was thinking of trying the superglue trick however the technician made the piece so small that I won't be able to get enough surface for the adhesive to stick to. He also said that since the peice of metal is copper it won't come out with glue.
    I was wondering if there was any terminal code, or any type of overide that is possible without having to replace the motherboard(?) that will disable the headphone jack so I can at least listen to the speakers on my Macbook. There is no chance of me removing this tiny peice of metal by the looks of it.
    Thank you very much.

    AFAIK, you can't, it's a hardware switch, attached to the back of the headphone port.

  • Audio via headphone jack is really low

    The sound from internal speakers is fine, but audio via the headphone jack is really low.

    Hi Krich918,
    Your computer can tell when you have something plugged into the headphone port, and it remembers a separate volume profile for each (internal speakers vs. headphones). You may want to double check that the volume is up on the Sound preference pane in System Preferences when you have your headphones plugged in, as outlined in the following article (apologies if you have already done so):
    Mac Basics: Set your preferences
    http://support.apple.com/kb/ht2490
    Regards,
    - Brenden

  • Can barely hear out of headphone jack

    About a month ago, I went to listen to my music through my headphone jack and could barely hear it. I checked the volume and it was all the way up. I also replaced the headphones and nothing improved. I also use my iPod in my car and am able to plug it into the car via the USB and that seems to work just fine. It is obviously out of the 90 day warranty period, and I don't know what to do.

    The hardware warranty is one year. The free telephone support is 90 days.
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Can a 160gb back cover, headphone jack and battery work on a 120 gb ipod classic?

    Can a ipod classic 160gb back cover, headphone jack and battery work/with on a 120 gb ipod classic?

    Yes, the only difference is the HD capacity, the other physical attributes are the same, as there are paddings in the 120gb casing.

Maybe you are looking for

  • SkillBuilders Modal With Chart

    Using Apex 4.2 I am trying to open an interactive report in a modal window by clicking a bar in a chart. I am trying to use the Skill Builders plugin, but not getting very far. Has anybody got an example of how to do this Thanks in advance Gus

  • How to remove the Hyperlink in smartform

    Hi Guys, In my smartform, one of the filed having the Hyperlink, i could not find it hyper link. Please provide me steps to remove the Hyperlink. Thanks, Gourisankar.

  • HELP!!! manually managaing music/video for IPOD classic PROBLEM

    i set my ipod to manually manage music/video because i want to save space on my computer, etc. so i made that my setting and i applied it and everything. so i unchecked everything in my library. and when i add a song to my library, i check it, so it

  • Help with a BEx Query

    Hello Gurus, I have a requirement to write a query to list all the customers who have purchased over $450 (customer total) for a three month period and had not purchased any product from an item category in the same time period. My users want to see

  • Disabling Saving of Quicktime Movies In Compressor

    I'm creating a bunch of Quicktime Movies in compressor and I want to disable the save as option that the end user can see. (The drop down box on the lower right). I know I can do it through HTML by setting kioskmode to true, but that seems like an ex