My iPad cannot find my HP AirPrint printer HP 3050 . We are on the same network

I have recently converted all our family devices to Apple. My Mini-Mac has found my printer as well as my Mac Air. The only device that has not is my wife's iPAD. She is on the same home network as my other systems, but no results. Software updates are current on all. The local Apple store said that I am pressing the right Find Printer tab. What else can I adjust to link up here?

The HP 3054 j610a is not an AirPrint printer. The 2011 model, the HP 305xA j611, does support AirPrint. The list is here:
http://support.apple.com/kb/ht4356

Similar Messages

HT4356 Do I need an App to print from my iPad to my new HP AirPrint capable printer? My iPad says it can't find a printer and we are on the same network.

I have a new HP LaserJet M1217nfw MFP that is supposed to have air print. My iPad isn't reading it. Is there something special I need to do? Both are on the same network and my laptop is working fine with it. Any suggestions?

1. Make sure it's setup for network printing
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
2. You can try using this App
http://i1224.photobucket.com/albums/ee374/Diavonex/6df9f88d.jpg
3. Reboot router, printer and iPad if necessary

HT3500 I cannot connect Macbook (OS 10.6.8) to Epson XP 400 wirelessly. It works when connected to a USB cable. Both printer and Mac are on the same network and Norton/symantic is OFF. The Epson will not show up in "add printer". is off.

I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.

Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.

IOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change ?

iOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network, i.e. connected to the same wired/wireless router. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change this ? Means that the iPad and the Apple TV box both have to be in range of the wireless router when this wasn't a restriction before. Apple TV could be anywhere as long as it was connected to the same wireless router via ethernet cable. Seems like an unnecessary thing to restrict.

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

My ipad with retina display can't find my epson artisan 730 wireless printer. They are on the same network and printer's wireless connection is excellent. What are the steps to fix this?

My imac won't pick up the printer either. Even after I updated it's software. My ipad is new. Any help would be appreciated. Thanks!

No change. The printer still doesn't show up on my devices even though they are all on the same network. On the printer's connection print out the connection reads Pass and that the network is working correctly. However, then it states "*A router/access point channel conflict has been detected. If you have problems printing or scanning, Improve your wireless network environment." "*If the problems persist, see your documentation for help and networking tips."
I've gone through all the documentation and still can't figure out what the problem is. I've had the router checked out by my building and they claim everything is in order. I have a excellent signal.

How to Make Sure that the Apple Device and Printer are on the same Network

Depending on when one looks on this page, one can find members posting about issues with AirPrint or not being able to find the printer to use AirPrint. The first Item that people are told to check is the Apple Device’s settings. Sometimes the person giving instructions breaks down what to check and how to check and sometimes they do not. Below is a video that walks one through how to print a network configuration page, what information they need to pull from that report and how to then access the Apple devices’ settings and put the device on the same network as the printer. It then walks one through printing to the printer using the AirPrint feature.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?
This question was solved.
View Solution.

I hope that this is helpful.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

HT203322 Still having issues with installing Yosemite after deleting "Backups.backupdb" on the internal hard drive. I have restarted multiple times and cannot find any other back up files, yet I still receive the same error message during installation.

I am using a 2011 iMac on 10.6.8. I recently downloaded the Yosemite upgrade and during the installation process ran into the "this disk is used for time machine backups". I ejected the external drive I use for time machine backups and turned off time machine in the application. I then followed the instructions of the help article (OS X: Cannot install on a volume used by Time Machine for backups - Apple Support) by moving the folder "Backups.backupdb" that I was able to find on my internal hard drive to the trash. I have restarted several times after completing this process. I am still running into the same error during the installation process. I have searched the hard drive for any other backups and I cannot find any. I searched the hard drive using the command cmd-shift-g and searched for “backups.backupdb” and was unable to find any folders or files. Any other suggestions?

I have resolved the problem - I did not actually delete the "backups.backupdb" folder, I only deleted the contents of the folder. I must have only searched on the user account for the folder after I thought I had deleted it. Thank you for the assistance everyone and I apologize for the inconvenience!

Can I print to my airprint printer if I am not on the same wireless network?

I am trying to print to my printer (HP Color LaserJet Pro MFP M476nw) when I am on the road working. This printer is in my home office and I want to be able tp send items to it during the day so that they are printed and ready when I return at the end of the day. Is this possible. I have tried using the HP eprint function, which involves sending the email item I want to print to the printers email, but that never seems to work.

HP also offers a mobile print function. This may be what you are looking for. Please check out the following HP support article.

HT204291 I have updated the new iOS today and the mirring feature still does not appear on my iPad, iPhone 5 or Apple TV and all are on the same network ... Now what?

Ok it's been two weeks and I have not been able to mirror since I updated to IOS 7. I have called the support people with no avail. I was hoping that the new IOS7.2 software would fix the problem but once again I was mistaken... Do any of you know a way that I can go back to the IOS6 system so that my stuff will work?

Thanks, but a I indicated in my original post, I have already tried everything in that KB article. That article doesn't address the fact that I can mirror from an iPad 4, but not from an iPad 2. According to all of the documentation about mirroring, there is no reason why the airplay / mirroring icon shouldn't appear. It's explicitly enabled on iPad 2.

Linux users cannot open Firefox on multiple systems that are mounting the same network drive as their home directory

I am supporting a user who is logging into multiple linux systems that all have the same /home directory mounted to a network filer.
When the user opens firefox on one system, he is unable to open firefox on other systems.
I'm assuming this is because firefox is storing his profile in /home.
These are Centos 5.4 x64 systems, authenticatiing to a Windows 2003 Domain. The filer that hosts the home directories is a NetApp with both CIFS and NFS permissions enabled on the volume that /home resides. We are using the version that came with the Centos installation, 3.0.12

So while this worked well for my computer at home, it does not work for the actual computer the disk is mounted on. If I try to mount the disk as the "office" user, the computer rejects the connection to itself and tells me to access it locally. Any ideas on how to handle this? Thanks again.
dlr

Cannot not Mirror with Ipad or Macbook on the same network

I've installed a profile on my apple tv using apple configurator to join my school network with success. My ipad and macbook pro are on the same network all using the same username and password. The airplay icon shows up when they are on the network. I can select it and after about 10-15 seconds it switches back to the ipad and never displays on the apple tv. I was told but an apple rep that it may be a bandwidth issue but that has now been eliminated as a potential problem. Any help would be great. If I use ethernet with both the apple tv and macbook pro I can display using airplay but this does not help with the Ipad or the goal of using wireless.

Please post a link to the site.

My wireless printer appears as offline on my Macbook, despite being visible on the network and printable from a Windows laptop on the same network. Was fine previously. Any thoughts?

I have a MacBook Pro running 10.6.8.
I have a wirelessly networked printer (HP PhotoSmart D110).
All worked well until a couple of months ago.
For reasons unknown, I stopped being able to print wirelessly to the printer from the Macbook. It appears as offline on the HP Photosmart utillity that pops up.
I can print to teh same printer from a Windows PC on the same network.
I have also logged onto the printer, using it's IP address and printed its test page, so obvioulsy not a printer fault as such.
The old PowerBook on the same network doesn't print to it either.
Grateful for any thoughts for quick tests or tips.
Paul.

Nice one Ron, you're a star.
That was a complete fix.
My preferences was slightly different, but it was the same approach.
I had 4 printers listed. Some old ones that I no longer had and the one that didn't work. I deleted all of them, then hit '+'.
It came back up, searched for new drivers, then I was able to print as per normal.
Result.
Paul

HT4356 I still cannot print from my iPad cannot find AirPrint on my iPad

I Still cannot print from my iPad cannot find AirPrint

My printer is an HP PHOTOSMART 6520 e-ALL-IN-ONE, and when I attempt a download to the iPad a message "Safari cannot download this file" appears. Likewise?

My iPad cannot find my HP AirPrint printer HP 3050 . We are on the same network

Similar Messages

Maybe you are looking for