My iPad charger banged and now doesn't charge my iPad have tried other USB cables but nothing
Looking for some info on my charger for ipad2. It banged lat night and now won't charge my iPad have tried different USB cables in it but nothing happens
The iPhone charger will likely work, but will be MUCH slower than the one that came with the iPad.
Check the apple online store. You can purchase them.
Similar Messages
-
I cannot transfer my music from my laptop to my ipad, have tryed a few things but nothing
I cannot transfer my music in itunes on my laptop to my ipad, have tryed a few times but it wont do it?
what error messages were you getting. And what step are you doing to transfer your music?
if you have itunes installed as this is the only way to transfer music from your PC to the ipad. If you don't go here www.apple.com/itunes.
If you have it and your music is in the library. Do this. Connect you ipad to your computer click on ipad button in itunes next to summary click on music add check mark to sync music click on entire music library and hit apply at the bottom of your screen. -
I have transferred photos from my ipod touch onto my laptop.
the screen on the ipod has gone blank, except for very faint lines.
i have tried to restore the iod, but no joy..HELPWhat OSX version?
Reinstall OSX -
How do I connect my 2nd generation Ipod to a Firewire 800 port on a new laptop? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered and connected simultaneously. Pls help.
Try here:
iOS: Not responding or does not turn on
If not successful then time for an appointment at the Genius Bar of an Apple store. -
hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
Was downloading the os 6.1.3 software and the iPad seems to have frozen. Have tried the off button but nothing happens. Doesn't indicate that the power is on.
Then try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?
If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?
The port can fail. Internal boards can fail. Batteries can fail. All with the result that no charging occurs.
You can try Resetting the System Management Controller and you can try Troubleshooting MagSafe adapters.
But usually you will have to take the mac in to a service place for testing. It can get expensive, although occasionally it is not.
charlie -
I have updated my iPhone tithe new software and my phone is now saying connect to iTunes I have tried to do this but iTunes is saying I need to restore my phone help! My phone will now not turn on and only shows connect to itunes
Then connect it to iTunes. Hope you backed it up, because the restore will wipe your phone.
-
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
my ipod won't turn on and my computer doesn't recognize it, i have tried to reset it but it still won't do anything please help
Try here.
iPod Troubleshooting Assistant
Make sure and select the correct iPod. -
After the OS X Lion installation, my USB modem doesn't work. I already updated the USB drivers, but nothing happened. Any suggestion?
You might want to do a search here on the forums re. usb modems - I've seen several threads and the opinion appears to be that faxing is no longer supported (especially since the "Fax" is now missing from the Print Preference Pane in System Preferences). I am faxing with an all-in-one printer which is connected to a landline, but I have to use the printer's control panel - can't use it from the iMac.
-
The display suddently changed two days ago. Everthing exploded in size. I have tried changing the contrast but nothing works. The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus. What can I do please I am really disappointed since my iMac is only 2.5 months old.
Don't think so. But tried it anyway. I have been into utilities and tried different contrast settings now I don't know what is the right one. But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black. What is going on?
Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
Any ideas Capt? -
Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing has changed. I must say that my iphone was working perfectly until the last months my battery began to die all from a sudden, so my phone got turn off really frequently, so then i ordered a battery and changed it myself so when phone was on.. it had this problem.. im desperate here
No I haven´t take it to Apple Store, i think I will actually. My iphone was jailbroken and ulocked with gevey sim, but when this failures began i decided to restore it, and I did preserve the baseband, but when I took it into one of these "Places" they told me it would be a good idea to do a clean restore and see if this fixed the problem so I upgraded my baseband, and right now my iphone is freshly restore, no jailbreak no nothing.
Btw yes something like a year ago my screen was replaces by others not by apple, but I didnt had any issues after this.. until today (a little more than a year later). -
The box in my Photoshop Elements, which shows the size and type of brushes, has shrunk to one unreadable line. How can I expand this box to its original size? I have tried dragging it open but nothing happens and none of the tool boxes appear to give me an expansion option
Well, when you open the program, the splash screen, the window you see while the program is opening, should make that clear enough. For example:
Maybe you are looking for
-
Transfer Structure - Transport Problem
Hi Experts, I am transporting infosource from BW DEV to BW QA ( Datasource is transported and it is replicated) but when the request is imported in QA it gives me error saying " Transfer structure does not exist " . This Infosource is used for Remote
-
There should be a new System Update like good old Software Installer
I believe that there was once a program called Software Installer that was replaced by System Update. I liked the old one because of its clear layout and information: There was a column with software installed, column with current version and column
-
Hi all, Will a Mac mini run World of Warcraft smoothly?
-
Integration between SAP BI 3.5 and Business Object
Hi experts I'm working on a SAP ECC 5.00 environment with SAP BI 3.5 We want introduce the Business object application for the SAP Bi reporting, without upgrade SAP BI to 7.0 release. Can you suggest me a documentation or similar explaining the pros
-
Hello All, Issue Scenario I have scenario and we have 3 pricing procedure and each pricing procedure has different base price, It means, I am not using only 0PR0 as price. I have have defined two base prices - ZPR1 & ZPR2. each pricing pricing proced