My iPad color changed?the background is now green and blue .what should I have to do?

My iPad color changed?the background is now green and blue .what should I have to do?

go to settings. press on background and wallpaper. choose your new wallpaper. your friends might have changed it on yours or something.

Similar Messages

  • HT5312 I forgot the security questions and also the password for security info email of my apple id. Now I want to change the security info email with another. What Should I do?

    I forgot the security questions and also the password (and even account id, sequrity questions,... becouse I didn't use for a long time) for security info email of my apple id. Now I want to change the security info email with another. What Should I do?

    Even if I'm not despertate, creating a new Id is good Idia. But I think I must create another email address also since I can't use the first email adress as an apple id for the new one. That means I should check everyday the new email address also, that is making life complex. Better to try the 1st solution. Thank you very much.

  • I've updated my iphone and then the sound is cut off and sms what should i do ?

    i've updated my iphone and then the sound is cut off and sms what should i do ?

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • I was saving a pic from facebok onto my computer, and than sinc it to my ipad. To later find out it was a virus, i called dell to get my computer fixed, but my ipad when i tried to reboot now the white apple flashes in and out. what should i do?

    I was saving a pic from my facebook page to my computer, than sinc pics to my ipad. To find out later the pic contain a virus. I had my computer fixed, but i tried to reboot my ipad. Now the white apple flashes in and out. What is it I need to do?

    Fltmcmlxvi-
    If you connect your iPad to your computer and run iTunes, does it appear under DEVICES on the left side of the iTunes window?  If it does, select it and click on Restore.
    Fred

  • Since I got my iPhone4 whenever I sent a message the sent message showed up in a box with a green background.  Yesterday the background switched from green to blue.  Does this signify anything?

    Does the background color of the box containing a sent message have any significance?  As in, it was green and now it's blue.

    To expand on the previous poster.
    For those blue iMessages.
    http://www.apple.com/ios/features.html#imessage
    Messages sent when blue don't use up your SMS plan with your carrier, purely data through Apple.
    Only works when messagings another iPhone user running iOS5 or later.

  • I have changed the apple ID , now im unable to activate imessage, i have changed the apple ID , now im unable to activate imessage

    I hve upgraded ios6 yesterday n today i hve changed da password apple id login. now im unable to activate imessage. im geting the error 'THE username or password are incorrect. Try again..
    im able to use the same password in the app store..
    i have reset network settings, thn also same error

    Go here for help.
    https://iforgot.apple.com/appleid

  • HT4929 to keep using my mac email account on my Android,  do I have to change the settings on my phone and to what???

    I haven't received any emails since Saturday. How do I check to make sure my .mac account transferred correctly to icloud from my D
    ROID?

    "At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
    That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
    Personally I would double these amounts and add to that the diskspace needed for your Windows games.
    Stefan

  • After updating my iPad to ios 7.1 my folders turned gray and the bar at the bottom of the screen is the same gray instead of taking on the color of the background.  Is there a way to change this?

    After updating my iPad to ios 7.1 my folders turned gray and the bar at the bottom of the screen is the same gray instead of taking on the color of the background.  Is there a way to change this?

    Turn off the Reduce Transparency setting.

  • How can I change the background color of my podcast's iTunes page?

    My RSS feed just got accepted but now I need to customize the title, author, background color, and logo of my site. Does anyone know how to do this? Thank you!

    You can't change the background colour - it's white for audio and black for video. The other data can be changed by changing the appropriate tag in the feed, or if you're using a program or online service to make your podcast,. wherever they provide for entering this information.
    The title is carried in the 'title' tag; the author in the 'itunes:author' tag, and the 'podcast image' which appears on the Store page in the 'itunes: image' tag. Republish the feed after making the amendments: it will take a couple of days for the new data to appear, though the image may take several days.
    The image which appears in some podcasts in the bottom left-hand corner of iTunes when subscribing is not referenced in the feed but has to be actually embedded into the media file: please see this page:
    http://www.wilmut.webspace.virginmedia.com/notes/coverart.html
    You may find this general page on making a podcast helpful:
    http://rfwilmut.net/pc

  • Flash CS4 - Can I change the colors of the background or text that shows up in the Layers section?

    I am stuggling here!  I am colorblind.  I need to change either the color of the background or the color of the text on the layers section on the Timeline.  I simply cannot read/see what is currently showing.  It is a very light blue background with white text and white dots for seeing, locking, or setting the outline color.  I need to either change the text color and dots to black so I can see them, or try to change the background color to a dark blue so I can read the white text.  Changing the text color would really be my preference.  How do I do this?   Please help.  Adobe hasn't been very concerned about colorblindness when developing these products.  I can barely make out all the light grey/grey/dark grey/grey stuff.  Now this! 

    For Windows you can adjust your Theme (or download a new one and use that). This will alter the color of each layer, for example if you use Classic then it will use a very dark blue for layers that will provide higher contrast. I've downloaded other custom themes in the past that use a very dark grey for example.
    (By the way, for Mac users go to Appearance in System Prefs and choose a different Highlight color - you can choose a default or custom one. That color is used for the layer color).

  • How to change the background color of a cell based on other cell background

    Hi,
    Sorry if this is a basic question - I am new to XML. I want to create a table column, with no data in it. I then want to change the background color of the column based on the background color of other columns. I.E.
    - If there are 3 or less cells in this row that are not green, color this cell green.
    - If there are 4 or less cells in this row that are not green, and 3 or less are not red, color this cell yellow.
    - If there are 4 or less cells in this row that are not green, and 3 or more are red, color this cell red.
    If there are 5 or more cells in this row that are not green, color this cell red.
    Many thanks for any assistance.

    Okay - I have this resolved.
    1. Create two variables (Yellow and Red):
    <?xdoxslt:set_variable($_XDOCTX, 'Yellow', 0)?>
    <?xdoxslt:set_variable($_XDOCTX, 'Red', 0)
    2. For each cell, set the background based on their individual traffic light criteria, and update the associated color variable by 1. By default the backgrd color is set to Yellow so I only have to check for the lower and upper bounds:
    <?choose:?>
    <?when:number(CHECKED_IN)<=1?>
    <?attribute@incontext:background-color;'Lime'?>
    <?end when?>
    <?when:number(CHECKED_IN)>3?>
    <?attribute@incontext:background-color;'Red'?>
    <?xdoxslt:set_variable($_XDOCTX, 'Red', xdoxslt:get_variable($_XDOCTX, 'Red') +1)?>
    <?end when?>
    <?otherwise?>
    <?xdoxslt:set_variable($_XDOCTX, 'Yellow', xdoxslt:get_variable($_XDOCTX, 'Yellow') +1 )?>
    <?end otherwise?>
    <?end choose
    3. I now want a cell that is Red if any of the cells in the row is red. Its yellow of there are 3 or more yellow cells in the row, and no reds. Otherwise its green. First, create an empty cell and make the default color green. Then add:
    <?if: number(xdoxslt:get_variable($_XDOCTX,'Red')) > 0?>
    <?attribute@incontext:background-color;'Red'?>
    <?end if?>
    <?if: number(xdoxslt:get_variable($_XDOCTX,'Yellow')) >= 3 and number(xdoxslt:get_variable($_XDOCTX,'Red')) = 0?>
    <?attribute@incontext:background-color;'Yellow'?>
    <?end if?>
    4. Finally, reset the variables for the next row:
    <?xdoxslt:set_variable($_XDOCTX, 'Yellow', 0)?>
    <?xdoxslt:set_variable($_XDOCTX, 'Red', 0)

  • How to change the background color of a desktop??

    any ideas how to change the background color of a desktop?? Now the default color is blue. I couldn't fine the API in JDesktopPane on doing that..
    JDesktopPane desktop = new JDesktopPane(); //(textArea);

    Try the method setBackground. For me it's work.

  • How can I change the background color in the inbox?

    The background color in my inbox (well, all mailboxes) is white. A yellow background would make the existing black text a lot easier to read. How can I change the background color in the inbox?

    Themes work in Thunderbird - duggabe was not refering to Firefox.
    Another useful addon is theme and font changer:
    * https://addons.mozilla.org/fr/thunderbird/addon/theme-font-size-changer/
    However, Thunderbird allows you to modify all sorts of things.
    Make hidden files and folders visible:
    * http://kb.mozillazine.org/Show_hidden_files_and_folders
    Help > Troubleshooting Information
    Click on 'show Folder' button
    a window opens shwoing profile folder name
    Close Thunderbird now - this is important
    In the profile name folder, Create a new folder called '''chrome''' - note the spelling
    It should be in the same place as the 'Mail' folder.
    see first image below.
    Open Notepad
    Can be located : Start > Programs > accessories
    Copy everything shown between the lines below.
    Paste into Notepad.
    Save as '''userChrome.css''' - note the spelling (edit updated - this was a typo error)
    This should be saved in the '''chrome''' folder.
    see second image below.
    Restart Thunderbird.
    I have chosen a yellow for you
    <pre>
    #f6f58c = a yellow....it is a hex code for a colour.
    </pre>
    You can change it if required. Remember when updating anything in the profile folders, you must close Thunderbird first.
    More info on colours.
    * http://www.yourhtmlsource.com/stylesheets/namedcolours.html
    <pre>
    * Do not remove the @namespace line -- it's required for correct functioning
    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
    /*Background colour for message list*/
    #threadTree > treechildren::-moz-tree-row {
    background-color: #f6f58c !important;
    </pre>
    -------------------------------------------

  • How to change the background color of a cell in datagrid using flex3

    i want to change the background color of a cell.....how can i achieve this.....and also i want to know how a spacing cane be done between cells in a datagrid...plzzz help me???

    The only way I can see to do this is to use an item renderer for your cells.  This is really scruffy and would need tyding up, and maybe with a little more time could do better or someone else may have an idea but none the less this works.
    Define a custom component as below;
    This has logic to see what the value of the data is proveided by the dataprovider for the row, and if it matches the conditions in this case is equal to 5 sets the background color.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="88" height="26" dataChange="doColor()" borderColor="#000000" borderStyle="solid"
        backgroundAlpha="1">
        <mx:Script>
            <![CDATA[
                private function doColor():void {
                    if (data.value == 5) {
                        setStyle('backgroundColor', 0xcccccc);
                    } else {
                        setStyle('backgroundColor', 0xffffff);
            ]]>
        </mx:Script>
    </mx:Canvas>
    Now just apply the item renderer in the datagrid and that will do it.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"  xmlns:ns1="*">
        <mx:Script>
            <![CDATA[
                import mx.collections.ArrayCollection;
                [Bindable]
                private var ac:ArrayCollection = new ArrayCollection([
                    {value : 1},
                    {value : 2},
                    {value : 3},
                    {value : 4},
                    {value : 5},
                    {value : 6},
                    {value : 7},
                    {value : 8},
                    {value : 9},
                    {value : 10}
          ]]>
        </mx:Script>
        <mx:DataGrid x="40" y="36" width="408" height="193" dataProvider="{ac}">
            <mx:columns>
                <mx:DataGridColumn headerText="Column 1" dataField="value" itemRenderer="MyComp"/>
                <mx:DataGridColumn headerText="Column 2" dataField="col2"/>
                <mx:DataGridColumn headerText="Column 3" dataField="col3"/>
            </mx:columns>
        </mx:DataGrid>
    </mx:Application>
    I hope this helps
    Andrew

  • Change the background color of a cell in JTable

    Hi all,
    How can I change the background color of individual cell in JTable. I need to construct my own TableCellRenderer or not? I'm now using the DefaultTableCellRenderer now.
    Thx

    You could create your own renderer or you could try something like:
    table = new JTable(model)
         public TableCellRenderer getCellRenderer(int row, int column)
              DefaultTableCellRenderer tcr =
               (DefaultTableCellRenderer)super.getCellRenderer(row, column);
              if (row == 1 && column == 1)
                   tcr.setBackground(Color.green);
              else
                   tcr.setBackground(Color.red);
              return tcr;
    };

Maybe you are looking for