My ipad device is disabled, if i connect it to a computer it gives an error 0xE8000084.I need to have my ipad working please.......

How can i enable my ipad again?

Here's your solution, hopefully, the inforrmation below in in this article: http://support.apple.com/kb/ts3221
Resolution
Note: If you use a Mac and see these symptoms, follow this article.
1. Restart your computer.
2. Install the latest version of iTunes.
3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
Windows XP Service Pack 3
Windows Vista
Windows 7
4. Download and install any available software updates from Microsoft.
5. Connect the device directly to your computer; not to an external USB hub.  Find out if your computer has USB 2.0 ports.
6. Check that the dock connector on both the device and cable are clean of any lint or other debris. If possible, connect  your device using a different Apple 30-pin to USB cable.
7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
8. Connect your device to a different USB port on your computer.
9. Use the Task Manager to stop some Apple Services:
Launch the Task Manager:
For Windows XP: Press Control + alt + delete on the keyboard.
For Windows Vista and Windows 7: Press Control + alt + delete on the keyboard. Then click "Start Task Manager". If Windows needs your permission to continue, click "Continue".
Click the Processes tab of the Task Manager. End each of these three processes by clicking in their names and choosing "End Process":
iTunesHelper.exe
AppleMobileDeviceService.exe
iPodService.exe
After ending these processes, reboot your computer, open iTunes, and test.
10. Connect your device to a different computer to determine whether the issue is specific to your computer.
If the issue only occurs on one computer
If the issue occurs on multiple computers
11. If you have performed all of the steps in this article and you are still experiencing the issue, contact Apple or your wireless carrier, whichever provides phone support for your iPhone. To find Apple's contact information in your country, refer to Contacting Apple for Support and Service. If you use an iPhone 3G or iPhone 3GS, you can find your wireless carrier at Locating iPhone wireless carriers. Wherever you live in the world, you can find your iPhone service options at the Online Service Assistant. You may have questions about servicing your iPhone, and you can find answers to frequent questions in this FAQ.
If there is an Apple Retail Store nearby, find the closest store and then make a reservation through the online Apple Store Concierge. Reservations are strongly recommended.
Additional Information
About unknown error 0xE800000a
When connecting your iOS device, iTunes might display an "unknown error 0xE800000a" when the contents of your lockdown directory are unusable. Do the following depending on your operating system:
Message was edited by: jesterwylde

Similar Messages

  • Please help, i connect my phone to computer and gives me error code this i phone cannot be used because the apple mobile device is not started

    please help, i connect my phone to computer and gives me error code this i phone cannot be used because the apple mobile device is not started

    http://support.apple.com/kb/HT1923
    uninstall and reinstall
    there is a complicated way to work with just the mobile device support but its simpler just to uninstall itunes and related components and then reinstall itunes
    ur music will be fine, u will just lose the playlists. but ur mobile device support will be working again.

  • TS4006 I found my device after an Erase i connect it to your computer and restored from a recent backup. It doesn't recognise my carrier

    I found my device after an Erase i connect it to your computer and restored from a recent backup. It doesn't recognise my carrier

    Try contacting your carrier.  Perhaps they need to do something at thier end.

  • TS3694 hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

    hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

    Hi ali hakim,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/TS4451
    This occurs when iTunes is unable to communicate with the update-and-restore server (gs.apple.com). This is most likely because it is being blocked, redirected, or interrupted by security software, hosts-file entries, or other third-party software.
    Cheers,
    - Judy

  • Hello and good afternoon, my IPod Touch is neither in windows explorer nor in iTunes to be seen. When I turn my IPod on, i shall connect it to my computer; but when I do so, nothing happens. What can I do, please ???

    Hello and good afternoon, my IPod Touch is neither in windows explorer nor in iTunes to be seen. When I turn my IPod on, i shall connect it to my computer; but when I do so, nothing happens. What can I do, please ???

    Take a look at the troubleshooting steps provided by Apple in this support article:
    http://support.apple.com/kb/TS1538
    Hope those help.
    Your iPod touch will never appear in Windows Explorer, by the way. It doesn't have the "disk mode" that the older iPods did.
    Regards.

  • I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously

    I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously please help?

    YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.

  • My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

    my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
    yours sincerly
    jackfromsurrey

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT4097 i have tried to restore ipad and continously it gives an error code of 1604. i have also set ipad in recovery mode multiple times and everytime the restore shows an error code of 1604. How do I resolve this?

    I was trying to update the iOS to version 6. The iPad was backed up and when trying to update the iOS 6 it errored with -1 error code. I set the iPad in recovery mode and tried to Restore it. It then gave an error code of 1604. I have tried the steps mentioned in the troubleshooting article for 1604 error and so far no luck restoring my iPad. Please help.

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • I used to connect the iphone to computer to make the backup . I need to know where is the backup path on computer?

    i used to connect the ipad or iphone to computer to make the backup . I need to know where is the backup path on computer?

    The following quotation is from iTunes: About iOS backups
    Where are iTunes backups stored on your computer
    The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
    Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista, Windows 7, and Windows 8:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press Return.

  • How connect 10g with discoverer (host name give me error)

    hi master
    sir i install discoverer but not connect with oracle 10g
    i flow this step
    1. From the Start button use Programs | Oracle - BIToolsHome1 | Configuration and Migration Tools | Net Configuration Assistant.
    2. Select Local Net Service Name Configuration the click the Next button
    3. Check Add then click the Next button
    4. Type the Service Name of the database you want to connect to, then click the Next button
    5. On the next screen, select TCP and click the Next button
    6. On the next screen, enter the full name for the Host name using a fully qualified domain name and then tell the system which Port the database is using. Click the Next button
    7. If you know a username and password on the database select Yes, perform a test and then click the Next button. While this is not a mandatory step it is well worth doing as it will show whether you can connect to the database.
    8. On the next screen, the test will either succeed or fail. If it says Invalid username / password click the Change Login button and enter a known username / password combination
    9. When informed Connecting... Test successful click the Next button
    10. Provide a name that you want to know this connection by then click the Next button
    11. When asked if you would like to configure another service name, select No and click the Next button
    12. Click the Next button again
    13. Click the Finish button
    but Host name or step 6 give me error
    this is my database name == universi
    this is my computer name == fahim
    this is my system user password == mfa786
    how i configure my discoverer with oracle 10g
    please give me idea
    thank's
    aamir

    thank's for your reply
    sir try to configure but host name step not success
    and i try to test
    then taht window give me this error
    see errir
    Connecting...ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    The test did not succeed.
    Some of the information you provided may be incorrect.
    Click Back to review the information provided for net service name, or Change Login to change username.
    ============== this is my bi path
    C:\oracle\BIToolsHome_6\network\ADMIN
    this is my tnsnames.ora file
    # tnsnames.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    UNIVERSI =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = fahim)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = universi)
    ================ this is my listener.ora file
    # listener.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\BIToolsHome_6)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = fahim.iqra.edu.pk)(PORT = 1521))
    when i try to run my discoverer that give me this error
    unable to connect fahim@universi
    failed to connect to databae - ORA-12514: TNS: listeer dose not currently know of service requested in connect descriptor
    please give me idea how i connect my oracle 10g with discoverer
    thank's
    aamir

  • How do i restore my ipod while its disabled and says connect to itunes but itunes said that it cant because it needs a password and also my home button is broken what can i do to restore it

    i cant restore my ipod because its desabled and it says connect to itunes. also itunes is asking me to put in a pasword but i cant and my home button does not work

    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Next use the method discussed in the following for placing the iPod in Recovery mode without buttons
    Turn on without Home/Power Button

  • My Ipad mini displays disabled. I tried to restore on itunes but gives me error code how do I reset .

    My Ipad mini displays the message disabled. I tried to reset on itunes but no luck. It gives me an error message that ipad has been locked with passcode. Tells me to enter the passcode I dont remember it. How can I reset without passcode.

    Force iPad into Recovery Mode (Step by Step)
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • HT1212 hi my i pad is disabled tried to connect itunes and its coming up with a error message

    please help me out to solve the problem
    my ipad is disabled after six wrong passwords
    i tried to restore it with itunes and its ending up with error message

    m12pru wrote:
    for some reason that link is taking me to 4oD
    How bizarre, try this again http://support.apple.com/kb/TS3694#error1015

  • TS1368 I just installed the new iTunes 11.0.2.26 desktop software and now when I try to connect to the iTunes store I get an error message: "iTunes could not connect to the iTunes Store. An unknown error occurred (-3212)".  I have a good internet connecti

    Any suggestions?

    Hi c1r1g1,
    If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

Maybe you are looking for