My iPad display is flickering green

I tried turning off and resetting, but no luck.

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

Similar Messages

  • HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).  My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple

    My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).
    My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple Menu.  The “Settings” does however displays the General menu allowing me to see:
    Apple software:          7.1 (7003)
    Apple TV:                   Model No. A1464, Part No. MD199B/A
    Signal Strength shows 5 circles.
    It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video.  I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2.  Can you help please?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • IPad 2 display has flickering vertical lines

    My iPad 2 display is flickering and has verticle lines.  It is acting like it is having a graphics card issue.  You can barely make out what is on the screen.  Due to familiarity, I am able to navigate through the menus.  It was not dropped and I am pretty sure there is no water damage.
    I took a screen shot of the display, when it downloaded to iPhoto it was perfect. 
    Any suggestions?

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Flickering Green pixels all over 21" Apple Cinema Display is getting worse

    Has anyone ever had this problem before? I have a 5 year old, not overly used 21" Apple LCD Cinema Display. Just recently, it started having these tiny flickering green dots but only on black fields. Now it is getting worse. I am now having the same problem only this time, additionally, its red on white fields. It goes on and off intermitently. Sometimes, my monitor would just turn GREEN especially after viewing some photos. (I think this monitor was made in Mars or something)
    What is causing this problem? Do I need to get a new monitor or can I still have it fixed? Please help.

    There seems to be a couple of threads on this issue, including:
    http://discussions.apple.com/thread.jspa?threadID=1954716&tstart=0
    In my case, the severity of the flicker varies with what is trying to be displayed. In screensaver mode, for example, there is no flicker unless I choose to display photographs. Problem is also quite severe when I'm in Aperture; less so in Safari.
    I've had the same problem with two separate graphics cards so it must be the cable or the display.

  • Flickering green dots... What's the final answer?

    Hi, I jgot in my 30" monitor 2 weeks ago, but ..waited to find on ebay an AGP video card. Spent far more than I should have to get it, and now have flickering green dots everywhere!
    The screen is perfect when directly connected to the monitor. When I use a dual link DVI extension I get them. I've changed out the extension and still get them.
    I tried all the tricks I could find... blowing out the connectors, taking off of sleep mode, changing number of recent items (I'm not sure what this refers to) from 0 to 10, going into and out of sleep mode, plugging and unplugging, changing resolution and display from 256 - 1000's and millions.....etc.
    All in all, something fixed it once! Then they came back.
    Frustrating. So... Is there a real answer?
    I'd include a photo, but I'm not sure how to add this as an attachment?
    I've put a link to my .mac account here:
    http://homepage.mac.com/robertlemke/PhotoAlbum3.html
    Thanks in advance!
    Robert

    OK, I think I solved the problem!
    The extension I needed was a basic female - female Dual link DVI
    Since I needed a male - female, the store sold me a gender converter. I have since bought a dedicated M/F dual link and it's working. I believe that even though I changed out the gender converter twice, it was just not up to carrying the bandwith needed for this type of signal.
    The problem is now solved and Altex took back the extension and converter, no questions asked!
    I bought the cable through a local mac dealer.
    Good luck to all!

  • My iPad won't let me sign into my Apple ID when I try and download an app it asks for my id and password and when i type it in the iPad displays a message saying cannot connect to iTunes Store. However when i do this on my phone it works perfectly.

    My iPad won't let me sign into my Apple ID when I try and download an app it asks for my id and password and when i type it in the iPad displays a message saying cannot connect to iTunes Store. However when i do this on my phone it works perfectly. Even when i sign in and out.
    Has anyone else had this problem? If so how can I fix this?

    Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it.  So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
    Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID).  If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.

  • HT4060 Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged informatio

    Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged information. How can I get it to charge beyond 1% so I can proceed to troubleshoot?

    I have had your exact problem with my old 3GS, now I cannot even get it to turn on, I still see that it is supposed to be charging though, but it never charges any so it seems.
    I replaced the Lower Dock Connector Assembly back when it still charged while hooked to my PC, and it found it made no real difference.
    http://www.amazon.com/gp/product/B003Y5YXLK/ref=oh_details_o05_s00_i00?ie=UTF8&p sc=1 
    At this point I am not sure if I should replace the battery and hope for the best, or just junk the phone, I cannot really sell it if I cannot reset it...

  • What's wrong with my ipad display?

    Today when I turned on my iPad I had about an inch and a half thick bar of colorful lines coming down the center of my ipad display. In time the bar turned completely black. Everytime the display goes to sleep, when I wake it up, it has the colorful lines again.

    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    If that doesn't work, then update iTunes on computer, backup device to iTunes, then restore the device.
    iTunes: Backing up and Restoring iOS software 
    http://support.apple.com/kb/HT1414?viewlocale=en_US
    Device not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US&locale=en_US

  • 24" Cinema display is flickering every 30 seconds or so. Has anyone found a solution?

    I have a 2009 Power Mac tower with a 24" cinema display also 2009. About a year ago the display started flickering, like it was turning on and off. I've got a duel display set up and the other one (older acrylic 20") works fine. I've checked the cords, updated to the latest soft wear, at least I think I have. I see others having the same issue. Has anyone found a solution? This is really annoying when trying to do graphics work. Any help would be much appreciated

    Hi 517 Design, 
    Thanks for visiting Apple Support Communities. 
    If you are seeing flickering on your Cinema Display, you can find many additional troubleshooting tips in this guide that can be helpful:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Best Regards,
    Jeremy

  • Put ipad display to sleep with video out on

    Is there a way to put the iPads display to sleep while using hdmi out? I noticed a slight burn in of the Netflix logo...

    Bump

  • TS3274 My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    Has lock rotation been accidentally enabled within the control centre? If you swipe up the screen is there a circle with a lock symbol & if so is is greyed out or white - if white it is enabled.

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipad mini screen flickers constantly, restored it and reset it and it still flickers. what do I do now?

    my ipad mini screen flickers constantly, restored it and reset it and it still flickers. what do I do now?

    If you have done all of the above i would call Apple care or setup an appointment at a Apple Store for them to diagnose and replace.

  • Flickering green in black areas of screen

    I have a flickering green in the black areas of my monitor.  As if the Enhance contrast is set above Normal in Applications System Preferences Universal Access.  Though the slider is still set down at Normal.

    It does sound like the XT1900 is to blame. What you see is DVI noise. If you search this forum, you will see that it has been a common problem. If the MacPro is under warranty, then I would ask Apple for a replacement.

  • HT4946 my ipad display a message that it is disabled

    my ipad display a message that it is disabled

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

Maybe you are looking for

  • How to use Custom resource in MSA 5.0

    Hi All, I need to create a Custom resource on a tileset, where i need to create a hyperlink with an image. On clicking this image(hyperlink) , the control should transfer to the other tileset. Can anybody explain or share a code for the same? Thanks

  • Mapviewer demo Import error ( imp-00980 )

    I'm encountering an import problem when attempting to import the mvdemo.dmp sample data that is included with the Mapviewer demo into Oracle 9i PEdition. Is there a problem with the the EXP coming from Oracle v8? Here is a sample of the error log out

  • IPad and iTunes Freak Out!

    Bought a new iMac in November and finally got around to backing up my iPad to it. All software is up to date on both, but when I plug my iPad into the computer it starts freaking out. On the iPad, a message pops up about trusing or not trusting the c

  • Rebuilding help- need tips for Capital One Accounts

    Hi- Thank you all for all the wonderful information, you make rebuilding seem so easy and attainable! I never realized all the different versions of scoring, how to do debt validation, get errors removed from my report and where to focus my attention

  • LR or Bridge Bug: Keyword Container

    If you import images already keyworded using Bridge (Keyword Container) For example: Container (Places) Subkey (United Kingdom) Subkey (London) Container (Immediate Family) Subkey (Mom) Subkey (Dad) I found that some images with keyword tree structur