My ipad doesn't turn on

i have an ipad3 about 6months but before few days it stopped working. it doesnt open and the battery doesnt working..... any idea? i tried to set it on dfu mode but nothing!!!!

You have to solve your battery problem first.
1. Reset iPad (ignore this)
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air

Similar Messages

  • HT201412 MY IPAD DOESN T TURN ON ITS WRITTEN TO TURN ON ITUNES AND WHEN I DID ASKED TO RESTORE SO I DID AND IS NOT INSTALLING THE SOFTWARE

    MY IPAD DOESN T TURN ON ITS WRITTEN TO TURN ON ITUNES AND WHEN I DID ASKED TO RESTORE SO I DID AND IS NOT INSTALLING THE SOFTWARE

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Ipad doesn't turn on after ios6 update

    Hello
    I updated to iOS6 yesterday and when I got it this morning it doesn't turn on anymore.
    I let the update running during the night (because it was expected to last 3 hours) and when I woke up the iPad doesn't turn on. I tried to hold the sart button , the home button, long, short, but nothing worked.
    Can you help me with that ?
    Thanks a lot.
    Best regards

    Carioca23:
    So glad the solution worked for you!  I was panicking that my iPad (3rd gen, 4G LTE, wi-fi) was dead and started to search for solutions.  I discovered after trying it a few times that the seemingly dead iPad came back to life and is now working full force with no problems.  The battery was no where near dead, so that didn't cause the problem.  It seems this problem is happening with iPad 2 as well.
    I hope this solution helps many others who are experiencing this problem.  I heard it worked for the iPhone too with this same problem.  Good luck everyone!

  • Fully charged iPad doesn't turn on

    I have an iPad that will sometimes not turn on even when it is fully charged. In order to bring it back to life, I have to plug it into the wall. Also, I sometimes don't get email updates because the date on the iPad has reverted back to the 1970's.
    This iPad is never connected to a computer. Could it be an update issue?
    Has anyone else experienced these problems?

    Hi and welcome......
    This iPad is never connected to a computer. Could it be an update issue?
    Definitely.
    Try restarting the iPad. Press and hold the Sleep/Wake button until the red slider appears.
    Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    Carolyn

  • My Ipad doesn't turn when I turn it, My Ipad doesn't turn when I turn it

    My Ipad screen has quit adjusting when I turn it. How can I fix it?

    Hold down on the sleep button and the home button at the same time for about 10 seconds until the Apple logo appears on the screen. Ignore the red slider. When the logo appears let go of the buttons.

  • Ipad doesn't turn on.

    Айпад 2 завис. Экран то полностью гаснет, то появляется яблоко на экране. При подключении через usb - порт к компьютеру, ничего не меняется. комп не видит айпад. Айпад сам не включается.

    Try to restore your iPad using recovery mode:
    http://support.apple.com/kb/HT1808?viewlocale=ru_RU

  • HT201412 My iPad doesn't turn on, what can I do with it? Can I sell it to apple?

    I was updateing the new software

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My ipad 2 doesn't turn on, My ipad 2 doesn't turn on

    I used my ipad two days ago using mail and playng games only for a little time. I turn off ipad. Yesterday morning I tried to turn on my ipad but it seems dead. I try to charge after try all way to turn on it. I left it charging all the night but this morning it doesn't turn on still. Sorry for my english; hope have explained my problem.
    Thanks

    See if this will restart it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • When I turn my iPad the screen doesn't turn?

    When I turn my iPad the screen doesn't turn- please help?

    On the top (near the battery indicator) do you see a little circle with a padlock in the middle? If so, there's a slide switch by the volume toggles. flip that switch and see if it restores the accelerometer

  • TS3274 my ipad doesn't rotate correctly when I turn it.  what do i do?

    All of sudden my ipad doesn't rotate when I turn it no matter what buttons i push in settings.  Has anyone else had this problem & have an answer?

    Try rebooting the iPad and see if that helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • IPad mini doesn't turn on

    My iPad mini stopped working and it doesn't turn on anymore.... i did try to reset it and couple other thinks but nothing is working.. What can i do? Please help!

    Did you try the reset in the following way?
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
    Is the battery charged? Plug it into the charger and cable that came with the device and allow it to charge for an hour or so, then try to power it back on or perform the reset as indicated above.

  • TS3367 My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???

    My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???

    This is very easy to resolve in 3 easy steps. goto
    1. settings
    2. general
    3. where it says 'Use Side switch to'  you will see two choices
    a) Lock rotation
    b) Mute
    Mute will be ticked if you are not getting a ringtone when someone calls you on Facetime
    Simply Click on 'Lock Rotation'
    Lock Rotation will now be ticked
    Mute will be unticked.
    Facetime calls will now ring your iPad2

  • I turned off my ipad when it was upgrading the system and now it doesn't turn on. What should I need to do now?

    Hello!!!
    Can somebody help me?
    I just turned off my ipad but I forgot that it was upgrading a new system...and now it doesn't turn on.
    What should I have to do?
    Thanks

    Hold down on the sleep button and the home button at the same time for about 10 seconds until the Apple logo appears on the screen. Ignore the red slider. When the logo appears let go of the buttons.

  • My ipad has automatically shuts down and doesn't turned on as well. whats wrong with it?

    Hope you cam help me out because my ipad just automatically shuts down and doesn't turned on as well even though am charging it ..thank u

    Press power button & menu button hold both down until you see
    Apple Logo and wait see if ipad comes on you will not lose any data.
    Bsydd uk

  • HT1414 my iPad doesn´t work, I already restarted it, the screen keeps turning on and off, and I can´t see anything o work on it, what else should I do?

    my iPad doesn´t work, I already restarted it, the screen keeps turning on and off, and I can´t see anything or work on it, what else should I do?

    First lets assume you battery is completely or almost completely drained.
    Plug the iPad into the charger that came with it and plug that into a known good wall outlet. Leave it alone for at least an hour. Then, while it is still plugged in reset the iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad starts and seems to be ok let it continue to Harte until the battery is fully charged.
    If this doesn't solve the problem I suggest having an Apple technician take a look at your iPad. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Maybe you are looking for

  • Managed Server Startup failed after upgrade to 11.1.1.6 from 11.1.1.4

    We tried to upgrade from SOA Suite 11.1.1.4 to 11.1.1.6. After upgrade when we tried to start our managed servers we get the below error. Did anyone ran into this? If so how did you resolve it?. Its still referring to some Weblogic 10.3.4 libraries.

  • PDFs do not open in the browser since IE11

    Hi, since the IE11 is installed the PDFs do not open in the browser with Adobe Reader, but directly in Adobe Reader. The PDFs can be filled but not saved online because they are not open in IE. If I disable the PlugIn in IE11 and activate again it wo

  • Opening Documents in Word Crashes the Server

    I posted this in the "Using OS X" forum, since I didn't believe the problem to be OS X Server-specific, but haven't received any response at all. So If no one objects, I'm going to give it a try here: I'm running OSX Server 10.4.11 (none of the other

  • Lumia 920 broken glass

    My white lumia 920 screen broke when it slipped from my breast pocket and crash landed on a hard surface, please what can i do cause am missing my phone so much already and it was is my meeting hub with my clients and want something done fast. bought

  • Disc ejects to early

    when burning a dvd, the disc always ejects 5 minutes before the project is complete and ruins my whole project any help.....please?