My iPad doesn't want to start after I updated the iOS 8.1.3

after  I updated my iPad wit the IOS 8.1.3 it doesn't do any thing just show the Apple sign

Hey eliz_prieto,
If you cannot get passed the Apple Logo, then what you must do is to restore it using iTunes. To do that, you will need to put your iPad into recovery mode by restarting your iPad and holding the Home button when it powers on and after a few seconds you should see a connect to iTunes screen and then follow the on screen instructions to restore it with iTunes. Take a look at the article below to walk you through this. If you have a back up in iTunes or in iCloud then you can put that back on after the restore is complete. 
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Take care,
-Norm G. 

Similar Messages

  • Ipad doesn't want to start (french user)

    Hello
    My ipad doesn't want to start anymore.
    Everything was ok but when i have tried to start it, anything was wrong.
    The screen is dark and when i try to start it, there's only a light.
    I have tried to stay on "start button", but nothing appears.
    I have tried to update through a windows computer but i can't because there is a password on my ipad...
    Sorry for themistakes, but i'm french.
    Anyone can help me?

    i have this message in my computer: "itunes could not connect to the ipad because the ipad is locked with a password. Enter code so that the ipad can be used directly by itunes".
    But my ipad's screen still stay black

  • HT201406 Hi there, my iPad doesn't want to start anymore and it's fully charged

    Hi there my iPad doesn't want to start anymore and it's fully charged?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • After to update the IOS 7.1.2 version, my Iphone doesn't start.

    After to update the IOS 7.1.2 version, my Iphone doesn't start. I only see the iTunes icon and the drawing of the connector. Please help!

    Your iPhone is in recovery mode. Connect the iPhone to a computer that has iTunes installed and do a restore.
    If you can't update or restore your iOS device

  • After I updated the iOS version on 11/23/13, I can not access anymore my Pages. It says it's updating. How long would this take to update?

    After I updated the iOS version on 11/23/13, I can not access anymore my Pages documents. It says it's updating. How long would this take to update?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • My iphone 4s cant activate after i update the ios to 6.0.1, always shows this message " Your request couldn't be processed" we are sorry but there was an error processing your request, Please try again later........please someone help me...

    My iphone 4s cant activate after i update the ios to 6.0.1, always shows this message " Your request couldn't be processed" we are sorry but there was an error processing your request, Please try again later........please someone help me???

    It sounds a lot like your phone was jailbroken or hacked to unlock it before you updated.
    Was it?

  • My backup can not be restor for my iphone after i update the ios to 7 for iphone 5

    hello
    i need your help thats very important for me
    please guide me to solve this problem
    i back up my iphone before i restore the phone for update the ios
    then after change the ios to seven and it turns on the phone and request for restore the backup and i select the only last backup in my itunes and it stared to restore after a moments give me an error not to restore the backup
    and when i search the pc i thouth it exsist
    i had a lot of important information on that
    please help me

    You cannot.  However, your iCloud backup will be available to you in the current release of iOS (7.0.2).

  • My Microphone doesn't work this problem started after i updated to IOS 7.1.1 can someone please help me.

    I just noticed when i Facetimed my friend and she couldn't hear me.

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

  • IPad fails to connect to WiFi after OTA update to iOS 6

    After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
    Index: 62294
    Zeit: 19.09.2012 21:08:28
    Interface: WLAN-1
    Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
    Adresse: xxxxxxxxxxxx
    Grund: Cannot support all requested capabilities in Capability Information field
    It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
    Anyone with the same issue or an idea how to fix it?
    Thanks in advance, greetings from Stuttgart (Germany),
    Jens

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Xorg doesn't want to start after a global upgrade

    Hi, I first must mention that I'm a newbie at archlinux(So, don't be shocked by what follows ^^).
    I wanted to upgrade the whole system, but an error message appeared saying me that upgrading the system was impossible because of the two following files that were already present on the system
    /usr/lib/xorg/modules/libwfb.so
    /usr/lib/xorg/modules/extensions/libdri.so
    So, I removed the two of them, thinking that they were replaced by new binary files.
    But when restarting my computer, xorg doesn't start, and I don't know how to solve this problem.
    Thank you.

    I've looked at this file to see why it doesn't start, but as I said, I'm a beginner, and I do not understand this file ^^
    I'm giving screenshots of this file(Arch is virtualized with virtualbox)
    http://www.monsterup.com/image.php?url= … 369386.png
    http://www.monsterup.com/image.php?url= … 370299.png
    http://www.monsterup.com/image.php?url= … 378730.png
    http://www.monsterup.com/image.php?url= … 400178.png
    http://www.monsterup.com/image.php?url= … 413210.png
    http://www.monsterup.com/image.php?url= … 411784.png
    I'm gonna read the topics you gave me, bender02
    Last edited by ren0 (2009-04-13 10:55:03)

  • Kde doesn't want to start since last update

    yesterday I updated kde to the latest version 3.1.5-1
    But when my system boots (and it normally automatically logs me into a kde session) it sais something about an internal communication error, and that I should start dcopserver or something. After that it shows me the first time wizard, and when you complete this, it sais it doesn't have write access to my home directory. Then it hangs on the kde load screen, so you can't start it anymore. I'm using fluxbox to write this, and my home dir is perfectly mounted/writable btw.
    Ideas?

    the second I posted that, my system froze
    ctrl-alt-backspace or the sysrq stuff didn't work, only a hard reboot saved me
    there must definatelly be something wrong with that new kde package

  • Why has my iPad been freezing and slow since after I installed the iOS 8.0

    ipad freezing after installing new operating system

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • There are times 5s lagging very bad after I update the IOS 7.03, need help

    Before I update to  my IOS 7.03, I don't have this problem before.  But now, once in a while my phone is lagging very bad, not sure of why.  But it will goes away after a while. Anybody else having the same problem? 
    It happens most of time during log in.  It's impossible to use the finger print log in when lagging; and when type in passcode, letter sometime take 1 second to respond on screen.

    Basics from the user guide are restart, reset, restore from backup, restore as new. Try each step in order until your problem is solved.

  • TS3274 iPad 2 Auto-rebooting continuously after OS update to iOS 7

    My iPad 2 is auto-rebooting continuously after OS update to iOS 7 . After every reboot , it is waking up for around 20 seconds and then rebooting again with apple logo coming on the black screen . I tried switch-off/on but the problem is still there . Please tell what to do .
    PS : The iOS update was completed successfully . The General>Software-Updates shows "up to date iOS 7" .

    I somehow managed to restore the ipad within 20 seconds time . I erased all settings and data by General>Reset>Erase-All-Settings-And-Data (simply reset settings did not work) . Make sure you have backup of your data (on iCloud or iTunes) before doing the previous step . Thank god , now it is working fine . *** Apple !!

  • Bonjour keeps dying and doesn't want to start back up.

    Hey guys,
    On a bunch of our machines, after being upgraded to 10.6, bonjour appears to die completely. Sometimes I can get it to work again via CLI, sometimes I can't. All of our printers for our Macs are shared out via bonjour on a 10.5 Server. The majority of the machines are running 10.6.7, some are still on 10.6.6, but the problem has been around since at least 10.6.4, as far as I can remember.
    Any ideas why this is happening or how to fix it?
    Jason

    zaza2009 wrote:
    I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
    http://support.apple.com/kb/ts2570

Maybe you are looking for

  • Can't open Premiere CS4 project in CS5

    Having issues opening a premiere cs4 project in cs5. The machine I was using with Cs4 has died, so I'm trying to continue the project with CS5. Whenever I open the project I get a message saying "this project contained a sequence that could not be op

  • How to use For Each execution in OSB

    hi all, I'm confused about the 'For Each' action in OSB. Now, I have a variable('max') which equals to 3 , and I wanna to use For Each action to perform a loop execution, something like for(1 to 3)-- The code is like below: For Each variable 'value'

  • Problems updating Photoshop CS6

    Everytime I try to update my Photoshop CS 6, I do recieve the following message: Falha na instalação. Código de erro: U44M1P7 How can I solve this problem?

  • Period is missing when setting fps in QT (2997 instead of 29.97)

    Thanks for reading. I have this weird problem when exporting from QT. When I set the fps to 29.97, the period gets lost as soon as I hit ok. The result is a huge file size and the export process takes forever. This was the case before and after the l

  • Portal Security Context XI Propagation

    Hi, suppose a portal user has been authenticated using a certificate. Could this certifiate be used by XI to authenticate the user against a system connected by ABAP Proxies or the RFC adapter? Kind regards, Heiko