My ipad freezes, reboots on its own and when I try to restore the machine reboots before the process ends
Just bought this ipad in June 2013 and then all of a sudden about two weeks ago, I discovered the machine reboots on its own and would only be active for less than 2 minutes. I check the auto-lock assigned minutes and it was set on 15 minutes even at this, it will still go off after less than 2 minutes. I then checked on some of the suggestions on the net for a similar problem and resolved to pressing and holding the sleep/wake button simultaneously with the Home button to force a reboot. Even at this no change. Then I tried connecting the machine to a PC logging on to the itunes to do a backup and restore but the machine will not stay long enough to complete the procedure before rebooting on its own. Any help?
Try here:
iOS: Not responding or does not turn on
Similar Messages
-
my iPad shut down on its own and when i switched it on, it asks to 'Activate iPad' and reads below 'This iPad was lost and erased. Sign in with the Apple ID that was used to erase this iPad". Please help!!!!
Is it possible that you or someone who knows your iCloud sign on went into the Find My iPhone app and erased your device via iCloud? Because that is what that message is saying.
Have you tried to sign on with your Apple ID and password?
Was it online prior to this incident happening?
GB -
Has anyone else developed the problem of an over-sensitive MacBook AIr cursor? In the last few days mine has developed a mind of its own, and when you move it to the desired spot it can jump quite randomly. In mail, I try reply but it's jumped to "fwd" instead! Irritating.
Jumpy Trackpad
http://support.apple.com/kb/TS1449 -
When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please
If your iPad was work provided there may be options that they locked out. For example, a privately owned device can be set to never auto lock (last I knew anyway) but it's not uncommon for work or school provided devices to not have the 'never' option.
-
My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony
1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422] -
i have an iPad 2 and the volume icon is in the middle of my screen and when i try to turn the volume down it just goes back up again and it makes it impossible for me to play games or do anything
Have you tried giving it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if htat helps.
-
I am using imovie 09 and when I try to play the scenes from my hd camcorder the video freezes then audio freezes and the play bar keeps going with no video or audio. How Can I fix this??? PLEASE HELP!
Up front I would say the short answer is "no"... but the long answer is "sort of".
Replicators are part of the Fractal "arsenal" and Motion definitely has those, but I think you would be very hard pressed to come anywhere near the type of fractal imaging as in the Electric Sheep example.
I was able to squeeze the following out of Motion (the base element is a simple square), but by the time it got this far, Motion wouldn't play faster than about 1 frame every 5 or so seconds. At a certain point, you end up having to render movie files in order to see it in action (and that took Motion about 8 minutes for a 12 second project [09 iMac i7].) [If you're interested, I posted a short video of these here: http://www.youtube.com/watch?v=l6Fe_ydfAss. The segments are longer than 12 seconds each because these are designed to loop @12 seconds and each one was looped more than once.]
[You asked the question on the 4th - I "finished" this on the 7th... (I admit to several "false starts")]
If you have a faster mac than mine, you might be able to do more than this... and you really don't have access to the Maths that fractal apps have, so depending on your creativity for devising the "root" motif element you may (or may not) be disappointed in what Motion has to offer (it *will* try your patience!) If you would like to experiment anyway, I will explain some of the techniques I used for the above (which are, at best, rudimentary!) Once you get the basics down, you should be able to take off in your own directions.
HTH -
I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery... or just buy a galaxy s5?
If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board. Charging/plugging in to a power source is very damaging to wet electronic devices. There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again. -
my iphone is in recovery mode and when i try to restore it, its doesn't go all the way threw this happen right after i try to upgrade my phone. what do i do HELP ME!!!
Hi, are you doing it through Settings or via iTunes? If doing it through Settings, try plugging it in via USB and updating with iTunes. Hope this helps.
-
I get my emails sent to my Ipad 1 and when I try to open the excel files, they come up in a sort of word doc. how can I get them to come over on excel
I was still typing my first post while you had already responded.
Maybe I am taking your last post the wrong way but reread your post. If I am taking it the wrong way - please accept my apology in advance.
lisaadele123 wrote:
I get my emails sent to my Ipad 1 and when I try to open the excel files, they come up in a sort of word doc. how can I get them to come over on excel
Where do you state that you need to email the files to someone else?
Where do you state that you need to edit them?
This was my response ....
You can't edit any of these files without a compatible iPad app like Documents to Go (Excel, Word) or Pages (Word files).
You can open and view the files as mail attachments but you will not be able to edit them. Explain exactly what you are doing and maybe you can get meaningful instructions.
Basically I said the same thing as Julian and I thought that maybe if you explained EXACTLY what you were trying to do, it would be helpful.
Sorry for not being a mind reader. Your second post ...
I thought I had already explained, I get excel spreadsheets emailed to me I need to open them, read them, edit them and send them on to another person,
That is not what you asked the first time around.
Message was edited by: Demo -
i jailbroken my ipod and when i try to restore it, its stuck on the loading screen with a skull on it but now i cant even look at the apps or lock it plz up i tried everything pretty much. i tried putting it in dfu and dfu pwn mod
< Edited By Host >Jailbreaking has its consequences and voids the Apple warranry. We can't discuss jailbreading on this Apple forum.
-
I installed the Dreamweaver trail 5 days , but my computer restored and now its gone and when i try to download it again it says that i have got it.. how do i re install the trail?
Run the cleaner tool and try again.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
my iphone will not start on its own or when it is plugged into the computer... what do i do?
Go get it fixed.
-
I have iPad running iOS 5.1.1 and when I try to update to the latest iOS with iTunes I get "iOS 5.1.1 Your software is up to date"
It looks like some Apps I was using are no longer working properly under iOS 5.1.1Sorry, the original iPad can only be updated to IOS 5.1.1
-
I backed up my iPhone onto iCloud, and now any new pictures I take don't save in my camera roll. And when I try to open the photo app it turns white and eventually it closes out of the app.
rabidrabbit wrote:
Can I back up my iPhone 4S to my ipad 3 (64 gb)?
no
rabidrabbit wrote:
However, now I don't have enough space in iCloud to backup either device. Why not?
iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage.
Maybe you are looking for
-
Upon upgrading to the latest Apple release, my Canon Canoscan 9950F no longer works. After dialoging with the Canon representatives, the offered me a "discounted price" on new hardware. They support Windows 8, but decided not to support Mountain Li
-
9.4.2 Removed Basic Functionality!!
After upgrading Acrobat via a consistent message saying upgrade now or the world will collapse and btw, this upgrade addresses a serious security threat, my Acrobat Pro will no longer create PDF files either from within an Office App, from within Acr
-
Photoshop CC will not update.
When I click to update it usually goes to 57%, (at times more) then I get message in red letters "Update failed, Error code U44M1P7. I have tried several times on different days and always same result. Can I get some help with this to update Photosh
-
Nexus 5500 - unexplainable mutual-exclusion error when using "conf sync" mode
We have 2 Nexus 5548UP switches which are running NX-OS 7.0(5)N1(1). I'm trying to reconfigure an interface, which was previously configured in conf t (local) mode on both switches, in conf sync mode. Original config: conf t: interface Ethernet104/1/
-
Get HTML source from servlet or strut action
Hi, need ur help I would like to get the HTML source code after calling a URL, for example, Suppose a servlet will return a page hello.html, i would like to grap this HTML page source code in my servlet or strut action. How can i achieve this? Thanks