My ipad frequently reports a ME temporary error.

Can anyone advise if this is a hardware problem? What is ME?

Does it say anything besides "ME" ?

Similar Messages

Unable to open delivery reports in Exchange 2013 SP1. Gives warning "The status for the recipient can't be determined because of a temporary error. Please try again later."

This seems to be occurring with all users (have tested a few, all display the same exact error message).
When I click on "Message Delivery Report" in Outlook 2010 or 2013, it points me to the ECP and displays this message "Warning The status for the recipient can't be determined because of a temporary error. Please try again later." I'm
not sure which log files to look at. The last time I remember it worked was before I applied SP1, I think CU3.
Our environment is two servers running Exchange Server 2013 Std. SP1 (847.32) in a DAG.
Thanks.

Hi,
From the error description, I would like to clarify the following thing:
Delivery Reports is a message tracking tool that you can use to search for delivery status on email messages sent to or from users in your organization's address book, with a certain subject. In Exchange 2013, you can track messages for up to 14 days after
they were sent or received. Please make sure the message you are tracking isn't older than 14 days.
Here is an article for your reference:
Track messages with delivery reports
http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194).

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.

When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

ME returned a temporary error

I've been receiving the "ME returned a temporary error" message after I have been using my iPad for a few mins.
What is causing this error and how can I fix it.
Pierre

For anyone still following this thread, I just spoke at length with a Telus tech who seems to know what he's taking about (unlike other techs who are merely script readers). The error that we are receiving happens when The iPad attempts to connect to the Internet. The micro-SIM sends a message to the Telus servers indicating that a connection is required for a particular iPad. The responding message is what we get. He said that we should ACCEPT the message and proceed normally. It does not adversely affect the performance of the iPad. Telus does not really support iPad functionality but merely provides the means necessary to connect to the Internet. E tech I spoke with did seem to think that the addition of voice and text to the micro-SIM may be a part of the problem but unfortunately, there is no way to remove these two functions. He also said that if asked, the text portion could be disabled but would not guarantee that the iPad would connect if done. I guess I'm chicken because I said, no, don't worry about it, I'll live with the displayed connection error. Besides, it's not like we turn our iPads on and off repeatedly, only when its necessary to clear the memory cache or when a RESTORE is required, or when some tech thinks it might be necessary when troubleshooting. Otherwise, we tend to just let the iPad go to "sleep".

On iCloud we are currently getting frequent "Contacts has stopped responding" error message. We are a small company that accesses our address book contacts off-site.

On iCloud we are currently getting frequent "Contacts has stopped responding" error message. We are a small company that accesses our address book contacts off-site. Any solutions?

I've deleted all future appointments from the Hotmail calendar.
I've left the iPad overnight "thinking" about removing Calendar from iCloud and gave up this morning.
My son has school information on the iPad.
Please help???
Regards,
Anthony

VISA - unable to queue operation & device reported an input protocol error.

To summarise I have two main questions:
How can I clear the VISA operation queue and what causes an input protocol error during transfer?
I am using a Tektronix AFG3022B Function Generator with latest firmware connected via USB and LabVIEW 2013 SP1 patch 2 (13.0.1f2) 32bit with NI-VISA 5.4.1.
If I have a small timeout, say 100ms, and perform a save operation and op complete query on the device (*SAV 1;OPC?), then do up to 10 VISA reads; the first few reads time out (as expected), but then I frequently get the following error:
-1073807305 (0xBFFF0037) VI_ERROR_INP_PROT_VIOL. "Device reported an input protocol error during transfer."
Once this occurs, the whole VISA session seems to become unstable and lots of the read operations fail returing this error code and not the timeout error (0xBFFF0015 (VI_ERROR_TMO)).
This only seems to happen when I do save/recall operations (either internal or to a mass storage device connected to the instrument), all other commands/queries timeout for the first few reads (as expected) then return the value. Do you think this is probably down to poor instrument firmware/hardware? Or am I using the VISA incorrectly? I would have thought that attempting to read VISA data to soon should only generate a timeout error and not a protocol error.
Reason for small timeouts:
Instead of setting the timeout to 4 seconds and having no way of cancelling the read operation I set the timeout to 100ms and run a for loop up to 40 times ignoring timout errors unless it's the last loop iteration. This means I can the operation within ~100ms.
What causes the VISA protocol error? I can't find much information on it.
Once the protocol error occurs and I keep repeating the *SAV command, I get the following error:
-1073807303 (0xBFFF0039) VI_ERROR_IN_PROGRESS. "Unable to queue the asynchronous operation because there is already an operation in progress."
Once this error occurs, how can I force a clear on the VISA queue without unplugging/power cycling the instrument?
Some NI I/O trace captures attached to show what happens and test VI.
Using LV2014 SP1
Attachments:
VISA problems.zip ‏38 KB

I thought I would try to duplicate your problems, but I only have a Tektronix TDS Scope that has USB.
I am a big fan of using *OCP? to sync instruments control and your problem is of interest to me
This very simple write/read returns the *OPC '1' return char consistently between 175-185 ms. No problem
Trying your short timeout with a loop, I do not get what I or you expected.
If I run this with an adequate timeout (something well longer than the needed 185 ms) it returns in between 175-185 ms with one time through the for loop. As expected. No problem.
BUT! If I try setting the timeout to something below the needed 175 ms like your 100ms...
Sometimes it works but it takes over 2000 ms to return but only goes though the for loop twice.
But sometime it does not work at all, taking well over 10 sec to exit out of the for loop with a timeout error.
I never see the queue error that you are seeing
How long does it take to do a simple *SAV
I don’t think the queue error is coming from the instrument. You would have to send the instruments the SYSTEM:ERROR? Request before the instrument would report any of the instruments errors.
Be sure to set your Termination Char setting. I prefer to turn it off for the Writes so I control when to send it. But turn it on for the Reads
Also I noticed from your trace files that you use the *OPC? after a *IDN?. This is not needed as you will know the *IDN? is complete when your received the string back. In fact my Tektronix scope did not like it if I sent it "*IDN?;*OPC?\n". It would not send me anything back, not even the IDN.
Is the SAV command on your instrument so long that you need to be able to break out of the loop?
Omar

TS1566 I purchased a movie in my iPhone 5 but cannot get it downloaded to my iPad. I just get an error saying it can't download. No further info.

I purchased a movie in my iPhone 5 but cannot get it downloaded to my iPad. I just get an error saying it can't download. No further info from the error message

Hi Jlhall88,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iTunes Store: Movie rental frequently asked questions (FAQ)
Can I play my rental on more than one device?
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
You can delete the movie prior to the expiration date if you want to make more space on your hard drive, iPod, iPhone, iPad, or Apple TV. However, the movie will automatically disappear from your iTunes library 24 (or 48) hours after you've begun viewing it.
What happens to my rented movie if don't watch it?
If you don't watch your rented movie, it will expire in 30 days and disappear from your iTunes library. You will need to rent it again in order to watch it.
I hope this information helps ....
Have a great day!
- Judy

HT1212 I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.What should i do ? Somebod

I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.And also ipad goes into same disabled postion.What should i do ? Somebody help please.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Some users have reported as many as 8 or 9 attempts were necessary before success.
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed? i never had this problem before. if i do this will i loose all my files, music, etc?

When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?

No, you should not lose anything.

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
Everything was supposed to be backed up and restored after the update!
Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
Apple, you have no idea the level of stress you have created today.....

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

Performance issue in Report (getting time out error)

Hi experts,
I am doing Performance for a Report (getting time out error)
Please see the code below and .
while looping internal table IVBAP after 25 minutes its showing time out error at this poit ->
SELECT MAX( ERDAT ) .
please send alternate code for this .
Advance thanks
from
Nagendra
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
   INTO CORRESPONDING FIELDS OF TABLE IVBAP
     FOR ALL ENTRIES IN IVBAK
       WHERE VBELN = IVBAK-VBELN
       AND   MATNR IN Z_MATNR
       AND   WERKS IN Z_WERKS
       AND   ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
         WK_BLOCK, WK_MMSTA, WK_MSTAE.
LOOP AT IVBAP.
      CLEAR WK_INVDATE.                                   "I6677.sn
      SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
      AUBEL EQ IVBAP-VBELN AND
      AUPOS EQ IVBAP-POSNR.
      IF SY-SUBRC = 0.
          MOVE WK_INVDATE TO IVBAP-INVDT.
          MODIFY IVBAP.
      ENDIF.                                               "I6677.e n
      SELECT SINGLE * FROM MBEW WHERE             "I6759.sn
      MATNR EQ IVBAP-MATNR AND
      BWKEY EQ IVBAP-WERKS AND
      BWTAR EQ SPACE.
      IF SY-SUBRC = 0.
         MOVE MBEW-STPRS TO IVBAP-STPRS.
         IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
         MODIFY IVBAP.
      ENDIF.                                      "I6759.en
    IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
      CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
      MOVE IVBAP-MATNR TO WK_MATNR.
      MOVE IVBAP-WERKS TO WK_WERKS.
      SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
        WHERE MATNR = WK_MATNR
        AND   WERKS = WK_WERKS.
      IF NOT MARC-MMSTA IS INITIAL.
        MOVE '*' TO WK_MMSTA.
      ENDIF.
      SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
        INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
        WHERE MATNR = WK_MATNR.
      IF ( NOT MARA-MSTAE IS INITIAL ) OR
         ( NOT MARA-MSTAV IS INITIAL ) OR
         ( NOT MARA-LVORM IS INITIAL ).
         MOVE '*' TO WK_MSTAE.
      ENDIF.
      MOVE MARA-PRDHA TO WK_PRDHA.
      SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
        WHERE MATNR = WK_MATNR
          AND SPRAS = SY-LANGU.
    ENDIF.
    IF Z_BLOCK EQ 'B'.
      IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
        DELETE IVBAP.
        CONTINUE.
      ENDIF.
    ELSEIF Z_BLOCK EQ 'U'.
      IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
        DELETE IVBAP.
        CONTINUE.
      ENDIF.
    ELSE.
      IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
        MOVE '*' TO WK_BLOCK.
      ENDIF.
    ENDIF.
    IF WK_PRDHA IN Z_PRDHA.                                    "I4792
      MOVE WK_BLOCK TO IVBAP-BLOCK.
      MOVE WK_PRDHA TO IVBAP-PRDHA.
      MOVE WK_MAKTX TO IVBAP-MAKTX.
      MODIFY IVBAP.
    ELSE.                                                     "I4792
      DELETE IVBAP.                                           "I4792
    ENDIF.                                                    "I4792
    IF NOT Z_ALNUM[] IS INITIAL.                              "I9076
      SELECT SINGLE * FROM MAEX                               "I9076
        WHERE MATNR = IVBAP-MATNR                             "I9076
          AND ALNUM IN Z_ALNUM.                               "I9076
      IF SY-SUBRC <> 0.                                       "I9076
        DELETE IVBAP.                                         "I9076
      ENDIF.                                                  "I9076
    ENDIF.                                                    "I9076
ENDLOOP.

Hi Nagendra!
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
check ivbak is not initial
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
endloop.
U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
Thanks
Deepika

Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL

Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro Mariano

Hi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano

Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi - [.....] - RTBUIP_Build_Invoke.vi.ProxyCaller

Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
Olaf

Hello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany

XML Report Publisher program is erroring out

Hi All,
I've customized the AR Customer Statements.
I've created a data definition as "ARXSGP" and uploded the sample_output.xml of Statement Generation Program to it. Also I've created a Data template as "ARXSGPO" and attached the data definition "ARXSGP" to it and uploaded the customized rtf file "XXHCC_CLE_F_ARCUSBALSL.rtf" and set the default output type to PDF.
As I donot wish to call the XML Report Publisher program manually every time when I Print the Statements through Print Documents-->Statements.
So I've done the below customization in ARXSGP.rdf file ie; Print Statements Report which is an Oracle Report.
I've added the below code in After Report trigger.
=======================================
FUNCTION AfterReport
RETURN BOOLEAN
IS
BEGIN
Below code added for Customer Statement Case Study
DECLARE
l_req_id NUMBER := 0;
L_XML_LAYOUT BOOLEAN := TRUE;
BEGIN
L_XML_LAYOUT := FND_REQUEST.ADD_LAYOUT (TEMPLATE_APPL_NAME => 'AR', TEMPLATE_CODE => 'ARXSGP', TEMPLATE_LANGUAGE => 'en', TEMPLATE_TERRITORY => 'US', OUTPUT_FORMAT => 'PDF');
IF L_XML_LAYOUT THEN
srw.message(20001, 'Template is picked ');
srw.message(20002,'Concurrent request Id : '||:p_conc_request_id);
l_req_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:p_conc_request_id,
222, -- Receivables
'ARXSGPO', -- Statement Generate
'en-US', -- English
'N',
'RTF',
'PDF');
IF l_req_id > 0 THEN
COMMIT;
ELSE
srw.message(20004, 'Failed to submit request');
END IF;
ELSE -- Not L_XML_LAYOUT
srw.message(20005, 'Template is not picked ');
END IF;
END;
--------------------Code Ends----------------------------
SRW.USER_EXIT('FND SRWEXIT');
RETURN (TRUE);
END;
==============================================
After Printing the Statements through Print Documents-->Statements
Statement Generation Program is being called and later XML Report Publisher program is also being invoked.
But the XML Report Publisher Program is erroring out with below error.
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOREPPB module: XML Report Publisher
Current system time is 03-SEP-2012 17:42:18
Oracle XML Publisher 5.6.3
java.lang.NumberFormatException: For input string: "ARXSGPO"
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:447)
     at java.lang.Integer.parseInt(Integer.java:497)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:215)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-SEP-2012 17:42:22
Please help out with a solution.
Thanks,
Tech D

for r12 add one row for parameter "Dummy for Data Security" from desc of XDOREPPB
follow works for me
SQL> set serveroutput on
SQL>
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'N', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888651
successfully submitted.
PL/SQL procedure successfully completed
SQL> 'Y' for "Dummy for Data Security" also works for me
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'Y', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888652
successfully submitted.
PL/SQL procedure successfully completed
SQL>

Crystal report add on installation error

Hi ,
While starting the crystal report addon following the error is coming--> retrieving the COM class factory component with CLSID{3EBB7859-E4 E3-4D77-B ,our operting system -- windows 2003 server-- 64 bit ,
Regards
Naresh K

Hi Naresh,
You can find more information on the thread:
SAP Business One and Crystal Reports
There are quite few threads in 10 pages for Crystal Reports. You may post it there too.
Thanks,
Gordon

My ipad frequently reports a ME temporary error.

Similar Messages

Maybe you are looking for