My IPad froze so I turned it off and now it wont work at all!

Okay so pretty much the screen went dim out of no where and froze so I hit the sleep/wake button and home button and reset the IPad. But here's the thing, it won't turn on now. The IPad was at about 75% battery which is why I am so confused. If anyone has anything that could help me please let me know.

Good day vortexofpandas,
If you are having an issue with your iPad not starting up, you may want to troubleshoot using the steps in this article -
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
In particular the section titled If your device gets stuck during startup. 
Thanks for using Apple Support Communities.
Safe computing,
Brett L 

Similar Messages

  • HT1766 I was halfway through downloading iOs7 when it froze, so I turned it off and now it is in the recovery mode and says to restore it. I tried to restore it and it comes up with the code "An unknown error occured (3194)" What can I do?

    I was halfway updating my phone to iOs7 when it froze halfway through where it shows the apple symbol. So I turned it off and now it says that I have to connect to iTunes. So I did and it said it was in the recovery mode and should be restored. I restored it and then it come up with a message that says "iPhone cannot be restored. An unknown error occured (3194) What can i do to fix it? Please!

    vTanny wrote:
    ..."iPhone cannot be restored. An unknown error occured (3194)
    Please see the  More Like This  section on the right.

  • My phone was on 1 percent and i turned it off and now it wont charge

    i havent charged my phone since last night and it was on 1 percent and now the next day i plugged it in and it wont turn on. So i turned it off and i pluged it in again for 20 minutes and now it wont turn on at all

    Let it charge for at least an hour before you try to turn it on. If necessary after that hour, hold down the sleep/wake and home buttons together until you see the Apple logo and then release.

  • TS1363 my ipod turned itself off and now it wont come back on

    My ipod was fully charged & it turned itself off & now it wont came back on. What should I do? I sometimes have the same problem with my iphone3GS.

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. (And there is no need to SHOUT.)

  • IPhone turned itself off and now won't work or reset

    Can anyone help me. My phone turned off and then once I put it on charge it came up to plug into iTunes to configure and once I do this iTunes does not pick it up, it will not reset either =(

    Try restarting your iPhone by holding down the on/off and home buttons at the same time until you see the Apple logo.  If you are still having problems take a look at this link, http://www.apple.com/support/iphone/assistant/itunes/

  • HT201210 hi yesterday im was upgrading ios 7 in my iad butwhen its restart i turn it off and now its not working.it shows factory restore.i have done factory restore as well but after that its a same problem.can someone help me to fix that problem please

    hi all
    i have a ipad 2 and while im upgrading ios 7 in ipad i change my mind and i stop upgrading it,but after that when i turn it on it shows connect to itunes/i restore it but it still have a same problm,please i need your help to recover it thax

    Hi Jjjames,
    Thanks for posting. I'm really sorryo for the problems you've had. I can look into this for you if you wish. Drop me an email with your account details and a link to this post for reference and we'll take it from there. You'll find the address in my profile.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • My iPad stopped working and I turned it off,and now after charging it won't turn on!It shows the apple logo that's all...What to do?

    My iPad stopped working and I turned it off,and now after charging it won't turn on!It shows the apple logo that's all...What to do?

    Have a look at the following document, I believe your iPad's condition is explained at its end:
    http://support.apple.com/kb/TS3281

  • HT201263 my phone froze so i turned it off and back on and its stuck on the apple sign, its been like it since 9 last night

    my iphone froze so i turned it off and back on again and it has been stuck on the apple sign since 9pm lastnight how do i get it to work again?

    What version of OS X are you running? If your MBP came with an installation disc, try booting from it and using Disk Utility to verify and, if needed, repair your hard drive. If you're running Lion or Mountain Lion and your computer didn't come with an installation disk, try holding down the Command and R keys whilst booting and try Disk Utility.
    Clinton

  • I just updated the OS on my iPad.  Turned it off and now it won't turn on.  Anyone else having this problem?

    I just updated the OS on my IPad.  I turned it off and now have retured to it and it won't turn on.  Anyone else having this problem?

    Lc137-
    Try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes solves mysterious problems.
    If that does not help, see if this article does:  <iOS:  Unable to Update or Restore>.
    Fred

  • I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over  to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the pa

    I recently got a an iPod 5 generation as a gift    and while I was in my settings I turned on the voice over  to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the password but it would unlock, please can some one help me with this

    You have the accessibility VoiceOver feature turned on.
    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
      iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • I was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    Hello there, RFJA2211.
    The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • All of a sudden.. My BB began to feel overheated, turn it off and now it does not turn on, even does not charge

    All of a sudden.. My BB began to feel overheated, turn it off and now it does not turn on, I remove the battery because it felt hot.. I changed it by a new one..  began to flash.Few seconds later..  once again began to feel overheated and shut it down itself...  Now.. Its dead =(   I only have 8 months with the BB and now is Broke??? Its frustrated... I lost my information.. 
    Have you ever experience this? What can I do?
    Thanks

    Not much I'm afraid but when mine overheats and won't charge I put it in the fridge for a minute to cool down then try and recharge. Doesn't always work though. Can't wait for contract to expire and change for something better.

  • My ipod touch shut off and now it wont turn back on, how do i fix that?

    my ipod touch shut off and now it wont turn back on, how do i fix that?

    Hey lattifahfromny,
    Thanks for the question. Based on the information you have provided, the following resource may assist you:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • I HAVE AN IPHONE 4 I TURNED IT OFF AND NOW I TURNED IT BACK ON AND IT WILL NOT WORK ONLY SHOW THE APPLE ICO

    Can anyone help me how to make my iphone 4 work I turned it off and now I turned it back on and it does not work it only shows the APPLE icon on the screen it has being like that for past 9 hours.... HELP PLEASE

    Connect iPhone to Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart itself. Usually takes less than 15 seconds of holding both buttons.
    If you decide your iPhone is not working properly, and you decide to Restore your iPhone Firmware then do this. Open iTunes on computer, then connect iPhone to computer, then hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.

Maybe you are looking for

  • How to duplicate return of RFC.Exception Application error to test fix

    I am calling a RFC using a sync step in an BPM process. I am checking for system error and have an exception branch. However we got the below error (probably due to the ECC system not being available at that precise moment or something) which was not

  • How to set a cell editable at runtime for jtable

    Hi evry body i need to set a cell as editable during runtime and set some value for the cell and make it non editable after setting value how can i do it? urgent help appreciated regards anil

  • Buffer error when loading from EAS??

    All, We're on essbase 7.1.2 and having trouble loading an ASO cube thru eas. We keep getting error 1270040: Data load buffer [2] does not exist. I did some research on this and it should only happen when running thru MaxL, not in EAS. From what I rea

  • Changing server name

    Hello SAP gurus, I have created a proxy for accessing a web service on a remote server. It works fine Now I wish to move to the productive remote server (which has an other name and IP but has the same WSDL) Of course I can generate again the proxy b

  • NWDS version for EP7.0 EHP1 & CE7.1

    Hi All, Which NWDS version I need to install to support both EP7.0 EHP1 and CE7.1 for development and deployment of Web Dynpro Java . I am new to CE7.1. I am aware of settings need to done in NWDS for the deployment of WDJ application. For CE7.1 serv