My iPad got blackscreen, no response after reset, iTunes still recognizes iPad when plugged in. Any possible reason?

I have a 1st Gen iPad. Recently, it got fully drained (my daughter usually watches her movies on it). Now, I recharged it but it i don't see the RED battery icon when recharging. It did, however, make the sound whenever you plug it in to recharge, so I let it plugged in hoping that it's only because it was fully drained that's why it has a blackscreen. After having it plugged in to the wall charger with enough time to fully recharge, I tried to press the wake/home button but it did not respond. Tried doing a reset by holding down both power and home buttons, and it made a shutter-like sound but still no response on the screen. So, I tried plugging it in to my mac and hoping iTunes will turn it up. After plugging in, iTunes recognized the iPad and started synching.
I'm leaning towards hardware failure (screen) but is there some diagnostics that I could use to confirm this? Is there any other way to try to bring the screen back up?
Please response. Thanks!

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Similar Messages

Wifi option is greyed out and after resetting the setting my 4s unable to call any one or unable to recharge money....???

WiFi option is grayed out and after resetting the setting my 4s unable to call any one or unable to recharge money....???

the same thing happened to me. Last time this happened i held the home and power button until the phone turned off, then i turned it on and let it charge and it worked. Now it won't let me get past the Apple sign flickering every 5-10 seconds.

My IPad 2 won't stop saying not charging when plugged in any outlet

My IPad 2 keeps saying not charging when plugged in any outlet

On the off chance try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

Dear i have a problem with the fingerprint after updating to ios 7.1 when plugged in electricity works like a charm

dear sirs.
i am an apple customer since first iphone but right now i am having problems with fingerprint sensor after updating to ios 7.1.
when plugged to electricity it works but when unplugged sometimes work.
please solve this issue by a quick update and thanks.

I have been on the phone twice today with my carrier. They reset it the first time, it worked for an hour then messed up again. They reset it a SECOND time.. It worked for 6 hours, then messed up again. I don't know if this is a software issue or what but if ANYONE has any insight, I would appreciate it greatly.

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

My mac book pro doesnt start up after a small flash in jack when plugged in

my mac book pro doesnt start up after a small flash in jack when plugged in

It's a mac book pro 17", OS X 10,5 . It worked perfectly but when I (or actually my friend) plugged the jack into the wall outlet it came a small flash (in the wall outlet) and then it didn't start up. No sound, no light on the screen. I didn't actually see what happened, but I asked if she plugged it in with the magsafe wire still attached to the computer, and she believed she might have. Is there anything to do? I have a couple of mac computers, two other mac book pro (writing on the newest one now - 13" - late 2011 - OS X Lion 10.7.5), if it could help.

My iPad when plugged in says not charging. What could be wrong or how can I fix this?

My iPad when plugged in says not charging.....how can I fix this?

Some USB 2.0 ports and accessories do not provide enough power to charge iPad. When this occurs the message "Not Charging" appears in the status bar next to the battery icon.
Hence it is always recommended to use the iPad charger.
Refer www.support.apple.com/HT4060

My ipad 4 got in black screen, Itunes still recognize but throw me an error 4005 when i want to restore.

my ipad 4 don´t turn on, I'm very stressed.
Yesterday i took a photo and when I wanted to see it my ipad is restarted. took too long to turn on and turn off once was.
I've tried many ways to change the lightning cable, pc change, restoring the apple mobile device usb, but itunes still throwing me the error 4005.
I have proven with other software like redsnow but mark me the error as it does not support ios 7.1.2.
when i connect the ipad in Itunes, it says me that my idevice is in recovery mode.
when this happened it was the battery to 100 percent

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
 Cheers, Tom

My screen is gray even after resetting. Then changes to white, is there any hope?

Just had my screen replaced, charged my i phone 4 and after unplugging the screen turned a faint gray. After resetting the i phone 4 several times the screen turns all white as if resetting and then back to gray. What should i do?

Hello JosepiSantos,
Thanks for using Apple Support Communities.l
I'm sorry to hear about the issues your iPhone is experiencing after getting the screen replaced. I'd like you to follow the troubleshooting below to try and help resolve the issue:
Display shows a white screen
Try turning iPhone off and then on again.
If the iPhone will not turn off, try to reset it.
If that doesn't work, try restoring the device.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take care,
Alex H.

Resetting iTunes to recognize userid

Okay...after spending the day uninstalling and reinstalling iTunes 8.1, I decided to totally remove 8.1 and install a previous version in hopes that my CD burner would finally be recognized.
So my next step was to do a system restore to a few days ago, back when I was on version 7.5.5. I then learned that earlier versions would not open because my library was created by version 8.1., so I updated to version 8.1 again and, lo and behold, it worked and iTunes now recognizes my CD drives.
But I've created a whole new problem...my iTunes Audible Account is authorized, but only a small percentage of songs will burn because the majority apparently do not recognize that this computer is authorized.
I hoped to de-authorize my computer and re-authorize it, but because (presumably) of the system restore, the computer doesn't recognize my username and/or password anymore.
I've tried resetting my password on my iTunes account, but have been unsuccessful. (The userid/password obviously still works, or I wouldn't be able to log onto this forum.)
Any suggestions on how to reset my password on iTunes 8.1 itself?

I recently upgraded to the newest itunes. When I start itunes now I get a message that says importing library.xml - every time I start itunes. It then says that files are damaged and names it to a damaged file. I have been able to get my library back onto itunes, however it still imports every time. Also under my playlists tab it double, then triples and so on every time I start up. I have to delete the extra lists. Any help would be greatly appreciated.

Macbook can't find ipad when plugged in

Ipad not showing up on macbook when plugged in.
iTunes could not connect to the iPad “Renee's iPad” because the device timed out.
The ipad is open and is being charged by the macbook but doesn't show up in finder
Ultimately I'm trying to access the itunes movie rental on my ipad, but since it's not showing up on the macbook I can't transfer it via the cloud yet.

I rebooted everything and that worked.

IPhoto problem : Library size got to 251 GB after upgrading iTunes

I have iMac, iPad and iPod Classic.
While downloading the latest iTunes version (and importing some pictures from my camera) the sync stopped.
After a while I realized that my iPhoto library has got a size of 251 Gb (it was 34 Gb before the iTunes download).
This means that I can't sync all my photos to iPad etc.
But , above all, it appeared in "other" folder something like 216 Gb which I can't understand what it is !
Evidently I imported/downloaded something wrong from iTunes.
What shall I do now ?

There are some topics at the right on this page under More Like This that discuss a similar issue. Check those to see if it's the same as yours. I don't remember any of them offering a solution.
Do you have more photos in the library than you did before the iTunes upgrade? What system and iPhoto version are you using?

When I was trying to get icloud downloaded to my ipad I got an 1603 error. Then my ipad got the beginning hook up to itunes as you get when you first try your new ipad.

When I was trying to get icloud downloaded to my ipad 2 I got an 1603 error. Now my ipad 2 is showing the icon tha says to hook up to itunes.

http://support.apple.com/kb/TS3694#error1603
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Got always new playlists after starting itunes

Recognized another strange bug with the (German) version 7.6 of iTunes:
Often new playlists are created automatically. They're all empty and numbered from 1 to ...
I can't find out, why resp. when that occurs, but mostly they are created after iTunes started. First I thought that it has to do with the iTunes Store, therefore I deactivated it. But the empty playlists are generated further on! Often even while iTunes is running but doing nothing!
Anyone else with this strange behaviour?
THX in advance!

Hi there and yes, I have the same strange problem!
This morning I've got 14 new playlists, all empty, but done nothing in iTunes. I then deleted them ... the next time I've looked into iTunes I got again 4 new playlists. Annoying!
I hope that someone knows a fix for this strange behaviour!
Greets.

Pretty much non responsive after close to 4.5 years... Any suggestions?

I've owned by PowerBook G4 since Aug 2004, and it has served me pretty well. I had a battery change since my battery was one of the recalled ones. It was working fine up until about last month, when I started to notice that it was taking unusually long amount of time to execute simple tasks such as opening Safari, or playing videos.
I know that I cannot expect top notch performance since it's close to 4.5 years old, but if its taking me close to 10-15 minutes just to boot up, enter my password to log in, open up Safari, go to Google and search for something, there is clearly something wrong. I backed up most of my music, video, photos and documents to an external drive recently and tried to clear out much of my hard disk as possible and it showed a little improvement, but about 2 weeks ago, it started being cranky again. When I connect my iPod to load songs, it takes forever for it to recognize, only for it to freeze. First the cursor doesn't respond, then it becomes the rainbow circle, then just stops.
Anyone have any clue as to what could be causing this? Would it help if I back up the entire disk and reformat the hard disk?
Also the new batteries aren't working out too well, if I don't leave it connected to the power supply, the battery doesn't last beyond 15 minutes before it goes off to sleep mode.

I realize you wrote that a friend has already helped you. Here are step by step directions.
First, you need to format the new HDD
Next, install OS X.
If you need to migrate information from you old drive to the new, please post back and ask.
Formatting, Partitioning Erasing a Hard Disk Drive
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Installation Process
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Open Installer and begin installation.
• Select installation option
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger and later) BSD Subsystems (Panther & earlier).
• Proceed with installation.
• After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
• Download and install Mac OS X 10.5.5 Combo Update (Leopard) or
Mac OS X 10.4.11 Combo update (PPC) (Tiger) or
10.3.9 Combo Update (Panther)
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
cornelius

My iPad got blackscreen, no response after reset, iTunes still recognizes iPad when plugged in. Any possible reason?

Similar Messages

Maybe you are looking for