My iPad has 21 apps but my iphone4s only shows 13 - why?

I was trying to get apps from my iPad to my new iPhone and the apps store purchase section only shows 13 instead of the 21 that are on my iPad. Does someone know why, or rather how do I get all 21 available to download. Tks.

When you plug in your iPhone to iTunes, click on your iPhone in the list that runs down the left side and then in the large main view box on the right, click the "Apps" tab on your iPhone.  Check all the apps on the list that are available to you that you would like to load. There are going to be seperate lists as you scroll down.  Some of your apps may be iPad only, but going through the list, if you see they arent iPad exclusive, you can check them, then hit the "sync" button in the bottom right corner and it will load the remaining apps.

Similar Messages

  • Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

    Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT4759 My iPad was lost. I am using the Find my iPhone app, but it is not showing there (though the iPhones, even one that is not iCloud enabled, is). What can I do?

    My iPad was lost today. I am using the Find My iPhone app, but it is not showing on the device list or the map (though my iPhones, even one that is not iCloud enabled, is). What can I do?

    The only thing you might do is enable Lost Mode, which will allow you to set a passcode on it (as well as a message and phone number where you can be reached) so it will be locked when and if it does go online.  You can also receive an email informing you if it goes online so you can track it on icloud.com.  See http://help.apple.com/icloud/#mmfc0f0165.
    In the meantime, you may want to change your passwords.

  • What is a great calendar app? Currently using iPad standard app but doesn't show times

    I am looking for a calendar app that links to outlook exchange on my iPad. I am using the current standard app on the iPad and it doesn't show the times.  Any suggestions?

    Howdy squeakyred2,
    If I understand correctly you are getting the alerts from the events that you are creating on your Calendar app, but they do not show in the app once they are created. It seems to me that the calendar you are adding them to may not be checked, thereby making it hidden. To check this, first open the Calendars app and tap Calendars at the bottom:
    Calendar at a glance - iPhone
    Then verify the calendars you have showing. It should look similar to this:
    Use multiple calendars - iPhone
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My ipad is freez...it only show a home screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.

  • My ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u

    Option 1
    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My ipad has locked in the on position--shows icons but will not function or close down --can anyone help

    My Ipad has locked in the on position --shows icons but will not function--cannot turn off either---battery is fully charged--can any one help please

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

    How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture.  Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

    Homestly haven't a clue what's going on there. 
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • Material has more than one plant, only show the price for the first on

    Hi:
    I am having the standard price for the material with the different plants ,I am seeing only one Material and Standard price(if a material has more than one plant, only show the price for the first one In the report ):
    plant :de87 Material: 60020601 Standard price: 1237.00
    plant:PT01 Material :60020601 Standard price: 634.00
    In the report I am seeing DE87 with the standard price :1237.00 .
    I am extracting from the 0MATERIAL_ATTR
    Please help me how can I display all plants with the material and std price. In my data source there is no PLANT
    rgrds
    Kumar

    Hi:
    Report is running on 0MATERIAL(Transactional master data),Data sourc: 0MATERIAL_ATTR,
    We are having the standard price in the 0MATERIAL ,(Standard price is combination of plant and Material) .Plant is not available in the material,so in the report its displaying only first result
    plant :de87 Material: 60020601 Standard price: 1237.00 --->Displaying this
    plant:PT01 Material :60020601 Standard price: 634.00
    In the above we are having the same material but different plant and different standard price. so I need to display the both in the report.
    Rgrds
    kumar

  • Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

    I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
    I'm using Preview Version 7

    Hello @kgingeri1, 
    Welcome to the HP forums.
    If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
    If ePrint works fine, it is definitely a Google Cloud Print issue.
    Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
    Please call our Cloud Services at 855-785-2777.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Hours:
    Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
    Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
    Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
    Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    1, iOS only works on iPhone, iPads or iPods. These drives were probably made with an operating system that preceeded OS X such as OS 7, OS 8 or OS9.
    2, No, the data on the Zip Drives is formatted for the Mac.
    3, If your reformat them then all of the data is wiped
    4, The problem would be that the PC can not read the files as formatted on the zip drive by the Mac
    5, There are services that might be able to migrate the data for you but I seriously doubt that Staples or Office Max can do it for you. The services that migrate data charge big bucks so be prepared to pay for it.
    Allan

  • I push the cloud botton on the appstore to return the past purchased apps but it doesn't work.why?

    i push the cloud botton on the appstore to return the past purchased apps but it doesn't work.why?

    Oh gosh, this is ancient history for me.
    First, I remember some sort of third party boot enabler being required to install OSX on some G3s.  Not sure if it included iBook. http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto.htm l
    Second, which exact set of installer discs?  They have to be black colored retail discs, not grey ones which came with a specific model Mac and will only boot that model.
    What are the exact specifications of the computer?  Does it have sufficient RAM?  You're asking a lot for a G3 to run Tiger.

  • I have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    Hi,
    Have a Look at these Links on Home Sharing:
    http://support.apple.com/kb/HT4620
    http://support.apple.com/kb/HT3819
    Could be what you need...
    Cheers,

  • HT1209 I've successfully imported the videos I've shot with my iphone5 into iphoto on my MacBookPro but they're only showing up as still shots, ie the imported videos don't play! Itunes no longer opens automatically when syncing!

    I've successfully imported the videos I've shot with my iphone5 into iphoto on my MacBookPro but they're only showing up as still shots, ie the imported videos don't play! Itunes no longer opens automatically when syncing, and when I open itunes it shows that there are zero "home movies" in there, meaning that it never grabbed the videos from my phone either. What to do? Thanks!

    tl:dr?
    Really?
    There was a short version expressly for people who weren't bothered to read a myriad of text.
    Meh, not that it matters anymore. I ended up redownloading 70-odd albums, so I have the bulk of my music back. And I still have no idea what iTunes did with my files, but I'll make sure it never does it again.
    I would thank you for the help but you were utterly useless. Oh well, carry on.

  • Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

    Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

    If they aren't on icloud.com they are no longer in iCloud.  If you don't have another backup, I'm afraid they're gone.

Maybe you are looking for