My iPad has a black screen when I unlock it
My iPad has a black screen when I unlock it but when I reunlock it works agane
Settings, General, Autolock ?
Similar Messages
-
My ipad has a black screen and the apple logo and won't do anything else. I have tried to reset to no avail.
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else! -
My iphone has a black screen, when I attach the charger i get a beeping noise. It does not seem to be charging ?
try a reset, hold down the home/power button together until you see the apple logo and then release then wait for the phone to boot back up.
-
My ipad has a black screen and won't start, any ideas?
My Ipad 1 has a black screen and won't start, any ideas? It is charged.
If Paul's advice doesn't work try this.
Hold down on the sleep button AND the home button at the same time for about 10 seconds until the Apple logo appears on the screen - ignore the red slider - let go of the buttons and let the iPad restart.
BTW ...In order to start up under normal circumstances you only need to hold down on the sleep button for a couple of seconds or so until the Apple logo appears on the screen. -
My daughter has dropped her 2 week old ipad 2, it has a black screen with a little back ground light, but will not turn on . i have tried resetting and holding both the reset and sleep buttons down with no responce , can anyone suggest something else i can try please
Take it to an Apple Store.
-
Well my ipad ran outta charge and I put it on overnight! I started it up and went on an app (clash of clans) Then the app shut and the ipad had a black screen with the white swirly thing then it went to the homepage for five seconds but I couldnt click and thing, then it goes in a loop between black and home
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My ipad has a black screen and the power button is not working. Help!
This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?
Have you tried to give it a reset?
Reset
Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost. -
My iMac has a black screen when I turn it on.
When I tune on my mac it goes straight to a black screen. What do I do to fix this?
You are posting this in a server/enterprise message board. You might have better lucking posting it somewhere else.
You can try hooking up an external display to your iMac to see if it's a problem with the iMac screen or the logic board. If you get an external display picture, then you probably have a display problem in your iMac (bad lcd, bad back light, bad power to display, etc).
Also, try unplugging your computer from the electricity, holding down the power button for 15 seconds, and then plugging it in again. This resets the power management system, just in case something got buggy.
Good luck! -
Help iPHONE 4 HAS ERROR 21 AND HAS BLACKSCREEN HOW CAN I FIX IT
STOP SHOUTING! Please turn off your CAPS lock.
Then, try a search of the forums... you'll find an answer a lot faster than you will get a response. -
My macbook pro has a black screen, when i press the power button it comes on, i hear the chime and then nothing. the backlight is working so i dont think its the display. please help!
Restart it & hold the Option/alt key down at bootup, choose the Install Disc & start over, or maybe this first...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214 -
iPad 2 has a black screen which lights up to a grey black screen when I press the power or home button but I dont see the apple logo. The battery is fully charged and when I plug it in to my computer, I can use iTunes to do everythng except backup the iPad since its passcode locked. Please help me resolve this problem. I don't have apple care
Yup! I've been there! You just have to double-tap the screen with three fingers and the zoom should go back. You have to turn off the feature in Settings>Accessibility>Zoom>and turn the switch off so this won't happen again when you double-triple tap.
-
How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
Why does my iPad have a black screen and won't turn on even when I try charging it
I just got a survivor case today and put it on my iPad and it stopped working and just has a black screen even when I try charging it
Not charging
1. Reset iPad
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
IPad only has a black screen yet still lights up
My iPad 2 suddenly only has a black screen, however it lights up when home button or power button is pressed, but it is still a black screen! How do I fix this? Please Help!
I also have a game question but that is the least of my worries right now.Hi,
With the iPad turned on try a reset by holding down both the Home icon and power button together for about 10 seconds, you should then see an Apple logo in the middle of the screen.
Let us know how you get on, good luck.
Regards,
Steve
Maybe you are looking for
-
Windows 8.1 Update Failure : We couldn't complete the updates, Undoing changes
Yesterday I built my first computer and I installed Windows 8.1 on it, everything was running perfectly fine until today. This morning I had an update notification and I installed it, about half way through the update an error occurred and it said it
-
Hi, I have a little problem: in a XXX_SubmitInsertForm I insert into a table with to parameters. (first is the key) But before that I want to know if the record is already in the table. How can I do this? Thanks for your help. null
-
Template changes will not propogate out to the child web pages in the defined site.
I have a user in my organization who regularly makes changes to a dreamweawer template in order to universally change content on pages that are internal to her office. The site that serves her office has been defined in dreamweaver (we're running dr
-
After update udev mounts all partitions automatically (but shoudn`t)
Here goes: after updating udev from 167-2 to 168-1, it started mounting all partition at boot. No rules (the list and the rules are the default ones) seem to include this, and google said automounting MUST be set up by user. Downgrading fixes the iss
-
Hello I need to add an additional object class to AD groups that are created from OIM. I am using OIM 9.1.0.2 and trying to update the lookup.ad.configuration ldapgroupobject class from "group" to "group | PosixGroup" and it looks like this is not ta