My ipad has a very sensitive screen it only touches in some places

My ipad is very sensitive and i cannot touch it in many places do i have to buy a new screen or what do i do? anybody know anything will help thank you in advance

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

My iPad has locked so the screen doesn't rotate!? How do I un lock it?

My iPad has locked so the screen doesn't rotate!? How do I un lock it?

when you flipped the switch did the roation icon appear in the middle of the screen for a moment?
one thing you can also try is...
Try doing a hard reboot
1. hold the power and home buttons down
2. you will see the "swipe to turn off" screen come up... KEEP HOLDING THE BUTTONS
3. The screen will go black (turn off)... KEEP HOLDING THE BUTTONS
4. A white Apple logo will appear on the screen, now you can release the buttons. Let the iDevice boot... should only take a couple minutes.

IPad has blank or black screen

My iPad has blank or black screen. Also not turning on. What should I do now ?

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My iPad has lines though the screen is it broken or what is it, My iPad has lines though the screen is it broken or what is it

My iPad has lines though the screen is it broken or what is it, My iPad has lines though the screen is it broken or what is it.

If you mean physical lines, it is broken. If you mean the display shows lines in the images, it may be...do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. If the lines are still there ake it to an Apple store genius bar to be checked by the techs.

Ipad has white apple on screen

the ipad has a blank, frozen screen with just the apple on it. it won't turn off - i have held the two buttons down together and the apple just keeps reappearing... also, when i plug it into the computer, nothing happens. is this a lost cause?? should i let the battery die? is this fixable or do i have to go to the apple store?

this is for my ipad, not ipod touch.

E-mail on my iPad is 'frozen'. Other screens respond to touch but not the e-mail

The e-mail on my iPad is 'frozen'. Other screens respond to 'Touch' but not the e-mail.
Does anyone have any suggestions?

Your Users Guide has a whole chapter (at the end) devoted to what you do when things aren't going well, generally following the sequence of
Restart - red slider, then boot up again
Force Quit apps - either via Sleep/Wake followed by Home, or via Recents Tray
Reset - hold Home & Sleep/Wake to force reboot
Reset iPad Settings - Settings > General >Reset
Erase All Content - same as above
Restore iPad Software - iTunes or iOS 5 equivalent
You start at #1 and work your way through until the issue you're seeing goes away. If you get through all of the steps and it still doesn't work, you're pretty much out of gas and have to start talking to Apple.

IPad has locked up and is unresponsive to touch...unable to power off and reboot..

iPad has locked up and is unresponsive to touch...am not able to reboot or tun off.

Have you tried resetting your ipad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

IPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but brings error in downloading s/w message.can anyone help please.Thanks

iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks

http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

My ipad has been turning off every now and again for some time now but last night it turned off and when i try to turn it back on its just a blank screen with the back lighting. please help me

Hi there, ok so my ipad has been either turning off or just locking itself for sometime now but last night it turned itself off and when i tried to turn it back on it just came up with a blank screen with the back light. When i put it on the charger the sound of it charging happenes but nothing else. I hav tried resetting it but as i am not very savvy with all this stuff i thought i would get some advise before doing anything else. it anyone can help me that would be fantasic
thank you

If a reset doesn't work, try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

My ipad is spamming touches in some place in screen and not respond to my touchs

My ipad is spamming a fast touchs in one place in the screen and it really annoys
but when i lock and unlock the device the touch disapper and it gets normal
but after a while this touch spam begins .. Tried hard reboot. But useless ..

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

How to restore an iPad mini with a frozen screen and no touch activity?

The iPad has already be restarted by using the power and central button but after restarting problem remains....

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My 13" Macbook has a very dim screen. Replace inverter board or lcd screen?

I have a 13-inch Macbook and the screen display has gone extremely dim and is very hard to see. Should I replace the inverter board or lcd screen?

No dice I have it hooked up to an external display and can see that it isn't recognizing the battery. I've installed a brand new battery connector already, and this is the second battery (although they are from the same place, so maybe they had a bad batch?). I've done all the updates (firmware and Battery Updater) but still, nada. Any other suggestions?
I am not too familiar with this specific MacBook battery. When I push the button on the bottom, 4 out of the 5 lights come on, then the one in the middle, then they all go off. When I have it plugged in without the machine on, the light on the adapter is green. I start it up, and it goes to amber.
This is driving me crazy! What are the chances I would get two bad batteries? Or two bad battery connectors? Could it possibly be the logic board? I was thinking no, because it actually works fine without a battery and shuts off the backlight when the battery is plugged in.

Ipad has vertical lines on screen

Does anyone have a fix for vertical lines on the ad screen?

I had the same problem with my first gen ipad mini. The solution was not to do a hard reset, but instead to push the sleep/off button until the red slider appeared, then slide to OFF. Wait a few seconds then push the sleep/home button until the Apple logo appeared. The lines were gone. I called Apple Support and they wanted $19 to troubleshoot over the phone and $99-$199 to bring to the nearest Apple store. This may not be a permanent fix, but it resolved the issue. I purchased my ipad mini from a local electronics store in May of this year. Believing it to be new and still under warranty I called the AppleCare store and discovered that it had "previously" been purchased in November a year ago and was no longer in warranty. As stated, I've had the device since May and it has worked wonderfully until today when I turned it on and it had colored vertical lines displayed on the screen. The lines would change color at times and even became a solid black stripe. The strange thing was that when taking a screen shot the lines were not noticeable and didn't show up on the picture. The Customer Care support tech told me to search other display issues. On one of the support threads it had something to do with videos/video apps and that is where I saw to do the SLIDER OFF. It worked even when the hard RESET had not.

Help! My Imac has a very wierd screen problem!

Hey all Mac users.
I really hope that someone here can help me. A few minutes ago my screen went totally bananas! I was using photoshop when it happened. It didn't seem that my programs were affected, just my screen. I could see my mouse and move it on the screen.
This is the first time a thing like this has happened. I manually turned off the computer to restart it.
Here's a picture of what it looked like:
A friend told me that i should get a hardware/memory test but i think you need a cd for that or something? I am so bad at these computer problems..
I really hope that someone can tell me what's going on with my mac. I really don't hope that it will happen again!

Yes there is a hardware test you can run. Quite possibly it's still on the hard drive's hidden partition if you don't have the disks. More information about that here: http://support.apple.com/kb/HT1883
So what happened after you restarted the computer? Does - or did - the problem only occur while running Photoshop? If it has only happened once I'd wait and see if it does it again. It may have been just a one time glitch.

My iPod 5th gen has a very dark screen, help!

My battery died, so I plugged my iPod in to charge, however, the screen was very dark. I thought the problem might correct itself when it became fully charged, but it stayed the same. Changing the brightness in the settings menu doesn't do anything. I've also tried to reset all the settings on the iPod, but nothing happens. As far as I know, my iPod wasn't damaged in anyway beforehand. Is there anything else I can try?

Have you tried a reset or restore of the device in iTunes to see if that helps? To reset the device, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Otherwise, connect the iPod to your iTunes library and click the Restore button from under the iPod's Summary tab.
If the issue still persists, it's likely hardware related. A white screen could be the result of a loose LCD ribbon cable, or a damaged LCD screen. Either way you'll need to have the iPod serviced in order to gain fully functionality of it again.
B-rock

My ipad has a very sensitive screen it only touches in some places

Similar Messages

Maybe you are looking for