My Ipad has been locked (after wrong passcode) and tried to connect to Itunes but no success. Much appreciated for your help please.
Dear Sir/Madam,
I tried the following but no success:
1. Unplug the sync cable from device.
2. Turned off device (slide to power off).
3. Pressed and hol the Home botton and pluged in the sync cable.
4. Hold Home button until "Connect to iTunes" but this message did not appear
So couldn't go any further than this.
Looking forward for your help please.
Kind regards,
GS
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
This is an iPad user to user forum. Apple doesn't read or respond.
Cheers, Tom
Similar Messages
-
My Iphone 5 is disabled as i have locked the password many times.my iphone is saying connect to itunes.but iphone will not connect to itunes so i cannot get into my iphone.WHAT CAN I DO?????????????????
Open current iTunes on computer, connect iPhone to computer with lightning cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.
-
HT4946 my ipad has been locked because of the entreeng wrong passward after many times tring
my ipad has been locked because of the entreeng wrong passward , it says continu to i tunes but when i cannected the i tunes at this time my computer diricting me to bac i pad to enter right password.now i am not able to use my i pad
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My iPad has been locked because I forgot my passcode and now I can't do Restore because I need to open the iPad first. What to do?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset it via your computer's iTunes and restore your last backup to it
-
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.
-
TA24326 My ipad 4G has been locked by my child and I can't open it.
My ipad 4G has been locked by my child and I can't open it.
If your child set a passcode to the screen lock and cannot tell you what he/she set, restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?HI,
Kindly post this query in Acrobat forum:Acrobat
Regards,
Florence -
Hello my ipad 4 has been locked what should i do? it gives a message only your ipad has been locked with no other options. Thanks.
it cant just be locked. it may have 'ipad is disabled' if you have a passcode. give me more detail about what is going on.
-
HT4113 My ipad 4G has been locked by my child and I can't open it.
My ipad 4G has been locked by my child and I can't open it.
Answered in your duplicate post:
https://discussions.apple.com/message/20283585#20283585 -
HT201328 My iphone has been locked as incorrect passcode has been keyed too many times
My iphone has been locked as incorret passcode has been keyed too many times
Take a look at this link, http://support.apple.com/kb/HT1212
-
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Why my icloud has been locked !!! and i cant reset because my icloud is my reset email!!!
why my icloud has been locked !!! and i cant reset because
my icloud is my reset email!!!Use the Security Questions option: If you forgot your Apple ID password - Apple Support
OR
Contact Apple: Apple ID: Contacting Apple for help with Apple ID account security - Apple Support -
After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes. Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.
Connect with cable to computer. Your ipad is in recovery mode.
Follow directions to fix
http://support.apple.com/kb/HT1808?viewlocale=en_US -
i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz
Sounds like you broke it.
-
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
V V URGENT Report for Vendor Aging
Hi ABAP Gurus, I have to develop a report for VENDOR AGING. My requirement is i have to post an invoice. From Payment terms i have to get Dependent on posting date. Let us assume if payment term is 100 by adding posting date + payment term (100) i ha
-
MacBook Pro (Retina, Mid 2012) - Boot Camp/Win 7 - Num Lock Problem
Hey, I have a client who has a MacBook Pro (Retina, Mid 2012) who is experiencing a problem when booted into Windows 7 via Boot Camp in that he cannot type certain character like # (hash character by keystroke alt + 3) without Windows 7 error bleepin
-
HP Pavilion 23T AIO - Windows 8.1 Pro I see some settings for connecting and detecting a second display in the window 8.1 display settings. There are multiple USB ports but no video out ports like HDMI or DisplayPort or DVI. Is there an adaptor tha
-
Creating PDF tool bar in Autocad Architecture 2009
How do I get the Adobe tool bar and pulldown menus on my Architecture 2009 screen. When we were running ADT 2005 and then loaded Adobe 8 Prof. the pulldown menus and Adobe tool bars appeared on the screen. Now that we have upgraded to Archit. 2009 I
-
I cannot getr my phone to turn on after a software update. it is only showing the itunes icon and a cable. What should I do /