My ipad has been shutting down, went to do upgrade 6 and the devide locked with the white plug wanting me to plug into itunes. I had to plug my ipad into my laptop.  The only way to finally get my ipod to work was to restore to the factory settings.

My ipad has been locking up and shutting down when I'm using the internet. Went to do upgrade 6 and Ipad froze wanting me to plug into itunes. I hooked ipap up to my laptop to do upgrade, but the ipap was still frozen, I had to restore to factory settings, unfortunately I have lost my pictures.  Is there anyway to get the pictures back?

Pad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Similar Messages

  • When I turned my Macbook on and signed in, it has been shutting down automatically and restarting itself immediately after opening the desktop. The error message said, I'd shut down my computer unexpectedly. How can I get it to stop shutting down on me?

    Since downloading OS X Mavericks, my computer has been shutting down midway of starting up. Please help! The problem began after downloading the software free update. Now when I start my computer, it will starts up normal but when the desktop appears, there will be an error message that I shut down my computer because of an error and if I would like to open the applications that were open before the sudden shut down I should press continue. Then when I select continue, it will open up another communication window that my computer is restarting because of an error. Then the screen will revert to shutting down and restarting again. This has been going on now all morning. Can someone hlep me on how to resolve this issue?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with 68%.

    I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.

    Morning Clementine Lin,
    For more information this, please see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
    Have a nice day,
    Mario

  • My iMac has been shutting down abruptly

    My new iMac has been shutting down abruptly the past week and after that I have to wait several minutes to try and see if it will turn on. At first I thought it was overheating, but even after being on less than an hour it shuts down. Does anyone know the reason why this is happenig? Oh, and I was just browsing on the internet, there were no weird programs runnig and the anti virus scan says it's clean.

    Back up all data immediately as your boot drive may be failing.
    This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU D|I/O|nspace-h|n Cause: -|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

  • Macbook Pro has been shutting down unexpectedly

    My MacBook Pro (retina 15 inch) OS X Yosemite, which had been very stable since purchased in late 2013 has been shutting down unexpectedly in recent weeks. Sometimes it's caused by Excel or Quicken, other times, it's a mystery. And the whole computer crashes, not just a program. What could be causing this recent behavior?

    I found the records using the info on the link you provided. I have had five kernel panics in the last month. Do you want me to post them all here? I've copied yesterday's below:
    Anonymous UUID:       E22A1CED-5B00-740B-B546-C447BC133AD1
    Mon Feb  2 19:09:30 2015
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff7f9dd2894e): "sfree on invalid allocation at 0xffffff802ff02738"@/SourceCache/Sandbox_executables/Sandbox-358.1.1/src/kext/s malloc.c:224
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80ff66b540 : 0xffffff801cf2fe41
    0xffffff80ff66b5c0 : 0xffffff7f9dd2894e
    0xffffff80ff66b5f0 : 0xffffff7f9dd1b0c6
    0xffffff80ff66b610 : 0xffffff7f9dd2909b
    0xffffff80ff66b630 : 0xffffff7f9dd20ae4
    0xffffff80ff66b670 : 0xffffff7f9dd1ffb6
    0xffffff80ff66b6a0 : 0xffffff801d52f744
    0xffffff80ff66b6c0 : 0xffffff801d3a3add
    0xffffff80ff66b6e0 : 0xffffff801d12f482
    0xffffff80ff66b730 : 0xffffff801d14ab56
    0xffffff80ff66bb50 : 0xffffff801d39fc12
    0xffffff80ff66bbb0 : 0xffffff801d164f17
    0xffffff80ff66bc00 : 0xffffff801d15d143
    0xffffff80ff66bf20 : 0xffffff801d1523fa
    0xffffff80ff66bf50 : 0xffffff801d44b386
    0xffffff80ff66bfb0 : 0xffffff801d036e86
          Kernel Extensions in backtrace:
             com.apple.kext.AppleMatch(1.0d1)[37AE7F31-8D85-37FE-AA63-2070F6FE115C]@0xffffff 7f9dd1a000->0xffffff7f9dd1efff
             com.apple.security.sandbox(300.0)[0DA39A0A-5AF4-3696-B397-8FA104465BC4]@0xfffff f7f9dd1f000->0xffffff7f9dd35fff
                dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[B28E0B3E-38DF-380A-94C5-8FE108 57152B]@0xffffff7f9dd0d000
                dependency: com.apple.kext.AppleMatch(1.0.0d1)[37AE7F31-8D85-37FE-AA63-2070F6FE115C]@0xffff ff7f9dd1a000
    BSD process name corresponding to current thread: SymDaemon
    Mac OS version:
    14C109
    Kernel version:
    Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
    Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
    Kernel slide:     0x000000001cc00000
    Kernel text base: 0xffffff801ce00000
    __HIB  text base: 0xffffff801cd00000
    System model name: MacBookPro11,2 (Mac-3CBD00234E554E41)
    System uptime in nanoseconds: 36144377451197
    last loaded kext at 40027937608: com.symantec.kext.SymAPComm 12.7.1f4 (addr 0xffffff7f9d6a8000, size 20480)
    last unloaded kext at 192241439443: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9f45a000, size 8192)
    loaded kexts:
    com.symantec.kext.SymAPComm 12.7.1f4
    com.Logitech.Unifying.HID Driver 1.3.1
    com.Logitech.Control Center.HID Driver 3.9.1
    com.symantec.kext.ips 3.9.2f1
    com.symantec.kext.internetSecurity 5.4f4
    com.apple.driver.AudioAUUC 1.70
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AGPM 100.15.5
    com.apple.driver.ApplePlatformEnabler 2.1.7d1
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.driver.AppleOSXWatchdog 1
    com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
    com.apple.driver.AppleUpstreamUserClient 3.6.1
    com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
    com.apple.iokit.IOUserEthernet 1.0.1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHDA 269.25
    com.apple.driver.AppleIntelHD5000Graphics 10.0.2
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleThunderboltIP 2.0.2
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
    com.apple.driver.AppleHV 1
    com.apple.driver.AppleLPC 1.7.3
    com.apple.driver.AppleCameraInterface 5.29.0
    com.apple.driver.AppleSMCLMU 2.0.7d0
    com.apple.driver.AppleIntelFramebufferAzul 10.0.2
    com.apple.driver.AppleBacklight 170.5.0
    com.apple.driver.AppleMCCSControl 1.2.11
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleUSBCardReader 3.5.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.AppleUSBHub 705.4.2
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.7.0
    com.apple.driver.AppleAHCIPort 3.1.0
    com.apple.driver.AppleFWOHCI 5.5.2
    com.apple.driver.AirPort.Brcm4360 910.26.12
    com.apple.driver.AppleUSBXHCI 710.4.11
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 3.1
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 3.1
    com.apple.driver.AppleAPIC 1.7
    com.apple.nke.applicationfirewall 161
    com.apple.security.quarantine 3
    com.apple.security.TMSafetyNet 8
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 11
    com.apple.driver.DspFuncLib 269.25
    com.apple.kext.OSvKernDSPLib 1.15
    com.apple.iokit.IOSurface 97
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.driver.AppleGraphicsControl 3.8.6
    com.apple.driver.IOPlatformPluginFamily 5.8.1d38
    com.apple.driver.AppleSMC 3.1.9
    com.apple.AppleGraphicsDeviceControl 3.8.6
    com.apple.iokit.IOAcceleratorFamily2 156.6
    com.apple.iokit.IOUSBUserClient 705.4.0
    com.apple.driver.AppleHDAController 269.25
    com.apple.iokit.IOHDAFamily 269.25
    com.apple.iokit.IOAudioFamily 203.3
    com.apple.vecLib.kext 1.2.0
    com.apple.driver.AppleBacklightExpert 1.1.0
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.driver.AppleSMBusController 1.0.13d1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
    com.apple.iokit.IOFireWireSBP2 4.2.5
    com.apple.driver.AppleUSBMultitouch 245.2
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
    com.apple.iokit.IOUSBMassStorageClass 3.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
    com.apple.driver.AppleUSBMergeNub 705.4.0
    com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
    com.apple.iokit.IOBluetoothFamily 4.3.2f6
    com.apple.iokit.IOUSBHIDDriver 705.4.0
    com.apple.driver.AppleUSBComposite 705.4.9
    com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
    com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2
    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
    com.apple.driver.CoreStorage 471.10.6
    com.apple.iokit.IOAHCIFamily 2.7.5
    com.apple.iokit.IOFireWireFamily 4.5.6
    com.apple.driver.AppleThunderboltNHI 3.1.7
    com.apple.iokit.IOThunderboltFamily 4.2.1
    com.apple.iokit.IO80211Family 710.55
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBFamily 710.4.14
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.AppleMobileFileIntegrity 1.0.5
    com.apple.driver.AppleCredentialManager 1.0
    com.apple.driver.DiskImages 396
    com.apple.iokit.IOStorageFamily 2.0
    com.apple.iokit.IOReportFamily 31
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.Libm 1
    com.apple.kec.pthread 1
    com.apple.kec.corecrypto 1.0
    System Profile:
    Thunderbolt Device: Thunderbolt to FireWire Adapter, Apple Inc., 1, 5.6
    Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
    Model: MacBookPro11,2, BootROM MBP112.0138.B14, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 2.18f15
    Thunderbolt Bus: MacBook Pro, Apple Inc., 17.1
    Graphics: Intel Iris Pro, Intel Iris Pro, Built-In
    USB Device: Internal Memory Card Reader
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: USB Receiver
    USB Device: Composite Device
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
    FireWire Device: GoFlex Pro Mac, Seagate, Up to 800 Mb/sec
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x134), Broadcom BCM43xx 1.0 (7.15.159.13.12)
    Network Service: Wi-Fi, AirPort, en0
    PCI Card: pci11c1,5901, IEEE 1394 Open HCI, Thunderbolt@195,0,0
    Serial ATA Device: APPLE SSD SM0256F, 251 GB

  • My phone has been shutting down by itself. Why is it doing that?

    My Iphone has been shutting down by itself and its not keeping a charge either i use to keep battery life until at least the end of the day, thatas even when I close out my apps. Even Siri start talking on its own. Whats the reason for all this?

    The iPhone can shut down by itself when the battery is too low.  Don't know if you have a malfunction that is running continuously and as such draining the battery ...or if you just have a warn out battery. 

  • My i pad. been shutting down for 4hours now can any say whats wrong with it

    my i pad. been shutting down for 4hours now can any say whats wrong with it

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Old school with CS2.  Haven't used in a while and am unable to use the program as it says my serial number is invalid. Customer service tells me the server for CS2 has been shut down.  Then they sent me here for help.  Does anyone have any advice?

    I don't have a clue what I am doing with this.  Here is my discussion with Customer Service:
    Naresh: Hello! Welcome to Adobe Customer Service.
    Naresh: Hi Mary.
    Naresh: I understand you have been getting invalid serial number, am I right?
    Mary Vance: Hi
    Mary Vance: yes
    Naresh: Please provide me with the serial number, Mary.
    Mary Vance: I provided my serial number here
    Naresh: Thank you for the serial number.
    Naresh: Please allow me 2-3 minutes while I check your serial number.
    Mary Vance: no problem
    Naresh: Thank you.
    Naresh: Thank you for being online.
    Naresh: I would like to inform you that the server for CS2 products have been shut down by adobe since then you are not able to install the product.
    Naresh: However, I will provide you the link to download CS2 application. Please visit the following link.
    Mary Vance: will this allow me to reinstall Photoshop?
    Naresh: Yes, Mary.
    Mary Vance: ok...what is that link?
    Naresh: Please clcik here to download.
    Mary Vance: thank you....trying it now
    Naresh: You are welcome.
    Naresh: I will also provide you the link for further information regarding the installation of CS2 products.
    Mary Vance: the download doesn't have anything regarding installation
    Naresh: Please click for the information.
    Naresh: I am sorry for providing wrong link.
    Naresh: Please click here to download.
    Naresh: The 3rd link is for the download of CS2 Photoshop.
    Naresh: Were you able to view the download link, Mary?
    Mary Vance: what file in that download is supposed to help me?
    Mary Vance: the first and 3rd link were the same
    Mary Vance: when trying to load from my software, I get the message saying my serial number is not valid. All I need is a serial number that works. Is that going to be possible?
    Naresh: Mary, Adobe has disabled the activation server for CS2 applications, including Acrobat 7 and Audition 3, because of a technical issue.
    Naresh: So you will have to download the software from the above link.
    Naresh: May I know in what OS you are trying to install the software?
    Mary Vance: the link sends me to a CS2 help package
    Mary Vance: windows 7
    Naresh: I am sorry you will not be able to install the CS2 application on Windows 7 since it does not support CS2 version.
    Mary Vance: I have had on here for a few years...why all of a sudden would it not work? Illustrator is fine.
    Naresh: Okay.
    Naresh: You can try downloading the software.
    Mary Vance: was the original link that you sent me suppose to allow me to download Photoshop?
    Mary Vance: I did try and got the message that the serial number is invalid. Is there any way to get around this or should I throw it away?
    Naresh: May I know whether you uninstalled the product.
    Naresh: ?
    Mary Vance: I did uninstall Photoshop only. Then I tried reinstalling Photoshop only and got the message about the serial number.
    Naresh: I check and see that it seems to be a technical issue, I request you to please post your query to the forums so that you will get the resolution from our expertise and I'll provide you the link to visit the forums.
    Naresh: Please click here to visit the forums.
    Mary Vance: I guess I will try that.
    Naresh: Yes, please.
    Naresh: Is there anything else I can help you with?
    Mary Vance: I don't see where you helped me with this yet, so I guess not!
    Naresh: I am sorry for the inconvenience.
    Naresh: Thank you for contacting Adobe.  We are available 7 days a week, 24 hours a day. Goodbye!
    Any help would be appreciated.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • HT201210 I was updating my itunes on my ipad from my pc and my ipad has now shut down and shows a lock with arrow leading to itunes on screen. How do i unlock my ipad and get it working again?

    I was updating itunes on to my ipad from my pc and now my ipad has shut down and shows a lock with an arrow pointing to itunes. How do I unlock my ipad and get it back to working again?

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then... see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

  • My ipad has automatically shuts down and doesn't turned on as well. whats wrong with it?

    Hope you cam help me out because my ipad just automatically shuts down and doesn't turned on as well even though am charging it ..thank u

    Press power button & menu button hold both down until you see
    Apple Logo and wait see if ipad comes on you will not lose any data.
    Bsydd uk

  • IMac won't turn on (has been shutting down abruptly in the past)

    Okay, hi everyone.
    I've got a second hand iMac G3. It had problems with the hard drive earlier, so that's been replaced...
    In the past month and a bit my computer has been abruptly turning off (not completely, the white light of the power button is still on when this happens) with no aparant cause. The screen just goes black like turning of a TV screen and I can't do anything but turn it completely off by holding the power button.
    After this happens I would try and turn it back on, almost imedeiatly, but it wouldn't turn on: The power button would light up, and blink just slightly, with a slight tick/beep sound to accompany it. This is only straight afterwards though, if I leave it for a while then boot it up, it will be fine.
    A lot of the time this has happened when I've just walked away from the computer without it doing anything, other times it happens right in the middle of doing something..
    I haven't followed up the problem due to not knowing what it was at first and lack of time, especially this past month since I've been away overseas.
    And now it's the last time it's shut down on me. I tried to start it up again straight afterwards, and of course the power light blinked slightly along with the accompaning sound. Turned it off, tried again a bit later, still didn't work. Now when I try to turn it on I press the power button, it lights up for a second then turns off. So my computer wont turn on, and I don't know what to do.
    Hope one of you guys know what the problem is.
    I was looking at these threads and someone had a similar problem (http://discussions.apple.com/thread.jspa?threadID=1168792&tstart=0), something about the flyback transformer I think, whatever that is. Does anyhone think this could be the problem??
    Another thing. Just days ago I was having problems burning cd's (probably still am), something about error code 0x8002006D and not being able to calibrate enough laser power. I don't know if this has anything to do with it...
    Thanx for putting up with me, usually it's my dad but he's asleep sick..

    No Kittytom is referring to his having found that his iMac wouldn't boot right side up but would upside down. Further circuit disturbance showed that it was bad soldering on the Flyback transformer that was the problem.
    Also common were bad soldering on the HV capacitors in the area of the FT. Or just bad capacitors.
    If your iMac had cap problems it would exibit that behavior.
    Slow breakdown in the insulation of the FT would also act like that.
    Richard

  • Ethernet light remains on even when DV7 series laptop has been shut down

    Product: HP Pavilion DV7-7008tx
    OS: Windows 7 64-bit
    Issue: When I shut down my laptop and leave the ethernet cable plugged in, the ethernet light stays on. Removing the cable turns the light off, but putting it back in brings the light back on.
    Is this meant to happen, or is there a way to stop this?
    Thanks!
    This question was solved.
    View Solution.

    Do you have the "Wake on Lan" setup in the BIOs? The feature allows the computer to be woken up my network inputs. You will need to boot into the BIO to turn off this feature. You may be able to disable this feature in Windows 7 as well. Here is a good article on how to disable/enable the Wake on LAN feature: Wake-on-Lan (WOL) for Windows 7 Made Easy!
    Hope this helps!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • After having no internet for over 24hrs, my IPad has completely shut down. I have tried everything I can think of, including a reset but think that was a really bad move!! Any ideas for how to get my pad back? Simple words please..I am not a pro AT ALL.

      My internet was down for over 24hrs after a storm. During that time, my IPad completely shut down and I can't get it going again.  I studied the manual but couldn't find a similar topic.  I reset it and now it is totally goofed up.
       Does anyone have any ideas or should I just take it to an Apple store and pay??  Any solutions you may have, PLEASE use simple words as I am not a pro, by any means....probably why I'm in this situation.
       Thank you in advance.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My ipad has been disabled, my younger brother changed password and forgot it.  i no longer have the laptop i synced it with last. what do i do? can somebody please help..? thank you

    i cant use my ipad it has been disabled.  my younger brother changed the password and no longer remembers it.... Now i am stuck as the laptop i last synced the iPad with no longer works and the ipad is disabled.  Can anyone help...????

    And you are going to maintain regular backups of the computer that holds the data synced from your iPad? You know, just in case your iPad AND your computer get a problem?

  • Dual boot computer restarts by itself shortly after it has been shut down or put into sleep mode

    Hello,
    I have Toshiba Equium L40-14I (old) and dual boot Vista and Linux.
    A few days ago I noticed that while in a Linux operating system and when I put it to sleep (suspend) it would do so, but then immediately come alive again. The same thing happens with the shut down option. In Windows Vista it is the same. It does shut down, but in a few seconds restarts again and shows the normal options of choosing which operating system I want to boot. The computer only stays shut if I pull the power cord (it has no functioning battery) or it I forcefully shut it by pressing the power button for a few seconds.
    So far I tried this:
    - BIOS: 1. Changed to default factory settings. 2. Disabled wake-up on LAN and disabled wake up on keyboard.
    - Device Manager, Network adapters, NIC, Properties, Power management: unticked the option that allows the adapter to wake the computer
    - Device Manager: all drivers seem to be ok
    - Virus scan: although this is probably not the issue as it happens independently of which operating system I am using. I have not installed any strange programs.
    - I started from the Safe mode and then shut down. Same thing happened: it restarted automatically after a few seconds.
    - Disabled automatic restart on system failure. It didn't help.
    English is not my first language, sorry for the perhaps unclear way of describing this issue. I would appreciate any help. Thank you.

    You have done just about everything I can think of.  You didn't mention doing a System Restore.  If you haven't done one or even if you have, do a System Restore back to at least sometime before this started happening. If the first one doesn't work, try a different restore point and do it again. If that doesn't work, you need to consider a full HDD recovery to out-of-box condition which procedure is fully covered in your User's Guide.  I'm sorry I don't have a link for it but yours is not a U.S. machine and this site is for U.S. machines. It appears to be a U.K. model with support covered by THIS site.
    BTW, I wish the native Americans who post on here did  as well as you have so you have to make no excuses for your English. 
    C.B.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Maybe you are looking for

  • Phone crashes when trying to delete camera roll

    Have seen a few posts on here about deleting the camera roll, so had a go, as I was tired of photos being duplicated on my PC after download (Photoshop does not give the opportunity to delete the camera roll as it does with my SLR after syncing). So,

  • Work Environment in SAP R/3 system

    In real time work environment, what are all the SAP R/3 landscape exists, please explain about them. Thankyou for your time in giving the answers. Bhaskar.

  • Milestone billing without sales Order

    Hi Experts, We have a requirement to use SAP PS to produce a material and be used in the same company or the sister companies. The project will be only for OPEX cost. They have requested us to do by milestone billing as the fund will be paid at inter

  • PL/SQL Execution Time

    Hi, I want to know how can I show the time spent for procedures7functions?? Just like what i see for sql querys. Regards..

  • Where to configure the variable $baseurl in oim?

    Hi all, I am using the notification template located in OIM user and administrative console -> Advance -> System .. and there, there is a template that uses the $baseUrl variable. All is fine until want to send the notification, because when the noti