My ipad has "flatlined" after the "upgrade

I just upgraded to the new os...what a mistake.  My ipad has nothing but a flatline; my itunes no longer works...it was a "windows" type experience.  Now my iPad or iTunes does not work.  Please advise.

If you are saying that the iPad will not respond, try resetting the device.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you are trying to say that the progress bar (flatlined) and the Apple logo is all that you see on the iPad, restore it via recovery mode.
http://support.apple.com/kb/ht1808
This is not the correct forum for iTunes issues. Post in the iTunes section of the site. You might want to provide just a little more information than you provided here if you need help. The details that you provided are non existent other than you said that your iPad no longer works.

Similar Messages

  • Hi, I upgrade my Ipad to IOS7 and all my notes on the ipad are gone after the upgrade. There were some very important notes. Is there any way to get them back

    Hi
    After I have upgrade to ios7 - all my note's are gone !!!
    What can I do to get them back ????

    Try this...
    Tap Settings > iCloud
    Switch Notes off then back on.
    Give iCloud a few minutes to re sync the data.

  • How do i get my calendar, which is on my ipad, onto my iphone? I lost my calendar after the upgrade today.

    How do I get my calendar, which is on my ipad, onto my iphone?  I lost my iphone calendar after the upgrade this morning.

    I have iCloud set on my iphone, ipad and mac. But, for some reason, my mac has no calendar and now neither does my iphone.  Fortunately my ipad has my calendar - but I must get that back on my iphone.  I haven't synced by ipad to anything manually - but I assume icloud should have everything.  When I added an appt on my iphone calendar - it immediately duplicated on my ipad.

  • After the upgrade to ios5, I can no longer use my iPad to make purchases on ticketmaster.  Does anyone have a solution?

    After the upgrade to ios5, I can no longer use my iPad to make purchases on ticketmaster.  Does anyone have a solution?

    Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
    If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
    http://roaringapps.com/apps:table
    Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
    My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
    When your ready for new hardware and all new software, then buy a new machine.
    If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
    http://www.bombich.com/get_ready_for_lion.html

  • I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

    I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
    People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
    Sorry for my english, i am from Russia.

    I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
    It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

  • HT1414 I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday.  The security lock have never been enabled.  After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD!   ?????? APPLE, what programming subrouti

    I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday.  The security lock have never been enabled.  After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD!   ?????? APPLE, what programming subroutine is forgotten during functional testing prior to release of the latest iOS upgrade???? - Now from a borrowed hotel guest computer I post my ”HELP NEEDED”.  Please advice if there is a way to skip a security kode I never enabled (nor even tried out and diabled) – WITHOUT spending time to find a Apple store helpdesk  that restore via iTunes, and delete all my local data.  
    Reg
    SpannishFLY

    During the setup of iOS 7 which you went through after installation it asked if you wished to create a passcode. It is possible to skip setting up a passcode at this step but you must have created one.
    If you can't remember the passcode and you have enabled "find my iPad" you can use http://www.icloud.com/ to remote erase your iPad, then you can set it up again, and restore it from an iCloud backup.

  • My Ipad has frozen after updating, it has the itunes emblem and a usb cord image on the screem, what do I have to do to get it working again?

    My Ipad has frozen after updating, it has the itunes emblem and a usb cord image on the screen, what do I have to do to get it working again?

    You need to start the latest version of itunes on your computer and connect your iPad in order to restore it.

  • Phone and Contacts APP not working after the upgrade 4.01 from 4.0

    Dear all
    after the upgrade to 4.01 my iphone stop to operate the phone and the contacts app
    when i open phone or contacts the app close(crash) after 1 sec.
    When i connect to the mac i have the following message from itunes:
    "iTunes could not sync to the iPhone"Christos" because contacts are being synced over-the-air."
    Trying to open and change the settings at: mail, contacts, calendar but also crash
    Please help
    Thanks for your support

    This happened to me after I upgraded to 4.0. While the iPhone update offers some great new features it has really done a number on some very basic functions and overall operation.
    I am no longer able to use the contacts app to place calls. I can pull up my contact list but when I select an individual contact, the phone seems to freeze for a second and then crashes. (It might be worth mentioning that I use Exchange to sync my contacts.) While the contacts are all on the phone, I can't access actual contact information for each individual.
    I'm also experiencing random freezes, touchscreen delays, etc.
    I can deal with some minor bugs but not being able to use your contacts to place calls is a huge problem.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • How can i upgrade to IOS5.0?   I get a message saying my ipad is ineligible for the upgrade

    IOS5 downloads fine through itunes on my macbook and when I connect my ipad, it asks me if i want to upgrade.
    When I say yes, it backups up the ipad, extracts the software and then shows a message saying my ipad is ineligible for the upgrade.

    Hey Mighty Duck x,
    Thanks for the question. After reviewing your post, it sounds like you need to authorize the computer. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Authorize your computer using iTunes
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Upgrade problems - files missing in site after the upgrade

    gurus,
    i upgraded the webdb 2.2 to portal 3.0. when i went to the portal site, i found that in one folder some of the documents were missing. what i mean by the missing is, the document title was present in the folder but not as a link. it was there as a static text. under normal circumstances the user would click the link and open up the link (can be anything *.doc, *.pdf, *.xls etc.) but, i could not do so because there was static text instead of link.
    has anyone had a similar problem ?
    pls reply.
    thanx a lot
    null

    Hi,
    I am experiencing the same problems, some of the items are inacccessible, the path to these items are weird after the upgrade to portal 306.
    Here is an example:
    The path of an item may look like
    /folder/rootfolder/rootfolder/rootfoler/market/summary.doc
    there are so many rootfolders out there, assume rootfolder is the content area name.
    If I manually remove these redundant rootfolders, I can load these items individually.

  • Frozen ipad 2 64gb after the last update

    frozen ipad 2 64gb after the last update

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Authroization issue after the Upgrade for Multiprovider

    Hello Experts,
    After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the ID.
    The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
    In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
    This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
    Can anyone give me any idea as to how to solve this issue?
    Many thanks in Advance..
    Thanks
    Raman..

    Hi,
    Look at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07122ae-8216-2a10-c9a5-996717a0648b
    Hope it helps

  • Steps in BW after the upgrade of the source system R3 in netweaver 2004s???

    Hi,
    1. Who can tell me which are the steps to execute in BW after the upgrade of the source system R/3 4.6 to Netweaver 2004s (ECC6) ?
    2. Do the delta loads continue to run or must be re-initialized?
    Thanks for your help
    Dominique

    hi Dominique,
    you should take care not after upgrade, but also before upgrade
    or your upgrade has been done ?
    also stated, before upgrade
    If you use Logistic Cockpit, please make sure that you know notes 328181, 396647, 380078.
    These are absolutely prerequisit notes for using Logistic Cockpit.
    Never change the extract structure (communication structure) when there is data in SM13 or in the DeltaQueue!
    Never upgrade your PlugIn System when you have data in SM13 or in the DeltaQueue!
    SM13 and RSA7 have ALWAYS to be EMPTY BEFORE you apply any changes to communication structures, extract structures or any referenced Data Dictionary object or BEFORE you upgrade your PlugIn system!!!
    SM13 and RSA7 have to be EMPTY also when you apply PlugIn Support Packages!
    458305-OLTP system upgrade: What should I be aware of afterwards?
    Note 458305 - OLTP: System upgrade or SP - What should I be aware of after
    Note 301192 - Procedure after upgrading an R/3 source system
    Note 359412, there may be some others
    hope this helps.

  • Bridge Browser icon missing after the upgrade to OS2

    I have suddenly realised that the Bridge Browser icon has been missing from my PlayBook after the Upgrade to OS2. My service provider data plan supports browsing and I use to do that earlier on OS1. Now a days, since I am mainly using Mifi device...did not use Bridge Browser....BUT suddenly realised that this icon is missing.....
    Any idea what I need to do to get that icon back on PlayBook? and also use it....

    It's really funny...The OS2 manual says that there will be an icon for Bridge Browser....but in reality...you do not require any separate bridge browser icon...Browser main icon works for both...wifi connection as well as bridge connection....
    I am surprised, why RIM has not highlighted this fact in its OS2 manual.....
    Anyways....my problem is resolved....

Maybe you are looking for

  • How to keep a border even after right-clicking

    I have a JButton around which I would like: 1) a raised border to appear when hovering over the button, 2) a lowered border to appear when left-clicking on the button, 3) no border to appear when releasing or exiting the button, and 4) a raised borde

  • UPK preview topic not displaying after being published

    After preview topic loads, it will not display. We have already disabled popup blocker. Any help would be appreciated..

  • Change document type for J1inchln

    Hi All, I need to change document type for Tcode 'J1INCHLN'. Currently we are using document type 'SA'. Please guide. Regards, Raj Sir Moderator: Please, search before posting

  • Cash Journal using business transaction

    Hi Can I create two cash journal with one Petty cash account. The purpose is I want to give authorisation for entering cash journal , these person will use only one business transaction & would like to create another cash journal with same GL account

  • How to modify -classpath dynamically?

    use classpath to execute an application: java.exe -cp c:\lib; TheApp while TheApp is running, maybe another classpath is required (i.e. user uses FileChooser from TheApp to select a directory: c:\any_dir). my Q is: how to add c:\any_dir as a new clas