My ipad has locked up trying to download to icloud?
My new ipad has locked up with the following message on the screen
Icloud backup, this ipad hasn't been backed up...
Now I can't do anything
Try this and see if it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Similar Messages
-
My grandad has a 1st edition iPad and when he tries to download certain apps it says he needs at least iOS 5? Shouldn't this be updated automatically? Or can this be updated another way? I haven't been to see his iPad so he may not be looking properly??? Any helpers???
The iOS version is not updated automatically, though if he connects it to his computer's iTunes (if it's a recent enough version) he should be prompted as to whether he wants to update.
He should connect the iPad to his computer's iTunes and copy any purchases off the iPad to his computer via File > Transfer Purchases. He may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. He can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
He can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
His iPad should update to iOS 5.1.1 (which is the only version that is 'signed' by Apple for the iPad 1, it doesn't support iOS 6). -
IPad has locked up and is unresponsive to touch...unable to power off and reboot..
iPad has locked up and is unresponsive to touch...am not able to reboot or tun off.
Have you tried resetting your ipad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
My Ipad has locked itself up and is posting the followning message: iCloud Backup This iPad has not been backed up for 2 weeks.... I've plugged it in, it should be connected to rgour home wi-fi, but I cant get the message to go away when I push OK. I cant get it to do anything. It is fully charged, but I can't even turn it off (won't let me), Just continues to post the iCloud Backup message.
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
My iPad has locked so the screen doesn't rotate!? How do I un lock it?
My iPad has locked so the screen doesn't rotate!? How do I un lock it?
when you flipped the switch did the roation icon appear in the middle of the screen for a moment?
one thing you can also try is...
Try doing a hard reboot
1. hold the power and home buttons down
2. you will see the "swipe to turn off" screen come up... KEEP HOLDING THE BUTTONS
3. The screen will go black (turn off)... KEEP HOLDING THE BUTTONS
4. A white Apple logo will appear on the screen, now you can release the buttons. Let the iDevice boot... should only take a couple minutes. -
My ipad has locked-up, it has frozen while running an app, and will not respond to any button, what do I do?
It simply stays on the same screen image, and does not respond to anything. When I plug it into itunes, there is no indication of its presence.
The ipad's clock has also stopped.
eekTry a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it
Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it
Try:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
HT201263 My ipad has locked because we can't remember passcode. Can anyone help?
My ipad has locked because we can't remember passcode. Can anyone help?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily wor -
I am getting "an unknown error has occurred" when trying to download any free apps from my brand new 4S iPhone.
Please Help!!I had the exact same problem. Worked fine for a couple days then suddenly getting this error. I fixed it, however.
Do this:
Open the App Store app on your phone.
Go to the "Featured" section.
Scroll to the very bottom of the page and click on your Apple ID.
Screen pops up. Choose "Sign out".
Scroll to the bottom of the "Featured" section again.
Sign back in.
Try your download again.
This worked for me. Good luck! -
New iPad. I am trying to download apps that were on my old iPad and it's not letting me?
New iPad. I am trying to download apps that were on my old iPad and it's not letting me?
App Store>Purchased>Re-download apps
Make sure you are using the same Apple ID. -
My Ipad has locked in the on position --shows icons but will not function--cannot turn off either---battery is fully charged--can any one help please
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I bought PDF expert $9.99 for my ipad. When I tried to download to my iphone 5 , they tried to charge me one more time. Any solution?
There are two separate PDF Expert versions on App Store: PDF Expert for iPad and PDF Expert for iPhone. PDF Expert for iPad differs from iPhone version and both versions are not free.
-
My ipad has locked up after I uploaded ios7?
My ipad has locked up during uploading ios7, locked on terms and conditions, "touch agree" not responding.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Sign into iTunes on a computer with iTunes 11.1
- Go to Settings>Safari and clear Cookies, Date and History -
my ipad has locked with the note " this ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi.............I dont have a lock on it but i cant get rid of the above message bow to allow me access to back-up as requested. Any ideas?
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the device again -
My Ipad has locked with Itunes logo and cable displayed on a black screen. Cant do anything
My Ipad has locked on a black screen with only the Itunes music logo together with an arrow and a cable white photo display. Turning it on and off achieves nothing, only the Itunes circle and cable appear each time. What can I do to rectify?
I uploaded iOS 7 and the ipad came up with a black screen with pictures of iTunes logo and power cord. It wouldn't turn off or respond to any actions. A terrifying moment. I followed some suggestions from these discussions, connected iPad to Macbook with iTunes open and prayed. It took 3 separate times to completely reset the iPad, because of several "errors" that would occur throughout the lengthy process. This necessity to completely reset my iPad (and it is very shakily alive now, I fear) was a direct result of uploading the new OS. I am furious. What is going on with Apple? I see this has happened to people for quite a while now. Good Lord.
Message was edited by: Liz with the computer genius brother Fred
Maybe you are looking for
-
How do I convert a PDF to word... Just acquired the service, but cannot "save as " as word doc...
How do I convert a pdf file to word. I tried the "save as" option, but it does not work...What should I do?
-
Why do my panels not work in CC 2014
I made my own panels in CC but they don't work in CC 2014. I miss them.
-
Updating a table with no Primary key
What I am trying to find out is if you can uniquely update a single record in a table that has no primary key. I see no way to reference the record I want, other than specifying all the field values in a where clause. This is a problem though, becaus
-
Hi, We have document libraries with versioning enabled to allow major and minor (draft) versions. We have a workflow (slightly modified version of the default approval workflow) which triggers when a major version is published. On some PCs (all runni
-
How do I call a dll it is call from VB6 this way SHandle = TMExtendedStartSession(PortNum, PortType, vbNullString) the first 2 args are 16 bit signed integers how do i set up the calling of this call to the dll?? i am only vaguly familier with vb. an