My ipad has OS 4.3, and I just want to upgrade my OS
my ipad has OS 4.3, and I just want to upgrade my OS...I have no support, and am hitting a dead end...any advice on how t oproceed ??
Signed : the rookie
Connect it to iTunes on a computer and update from there. This is best done from the computer it's normally synced with.
(78842)
Similar Messages
-
When my ipad has photos on it and I connect it to my computer it is initially recognised as a camera before my computer crashes. Resulting in me having to reboot the system again and going through the disc checks to resolve errors. This has happened on several occasions. On previous occasions when I have not had any photos on my ipad it has connected to my computer without any problem.Is there a way of solving this problem without having to remove all of my photos from my ipad.
Being recognized as a camera is normal. Your computer sees the DCIM folder and doesn't know the difference between a 'real' camera and an iPad.
One way to stop it could be to tell windows explorer what to do. When you plug your iPad in do you see a little pop up window listing things to do with the device? If so, there should be an option to 'do nothing', which means you tell your computer 'hey, ignore this device'. Your iTUnes will still work when you connect them, the windows protocols that search for images, etc. should just let it be and hopefully stop the crashing. -
My Ipad has locked itself up and is posting the followning message: iCloud Backup This iPad has not been backed up for 2 weeks.... I've plugged it in, it should be connected to rgour home wi-fi, but I cant get the message to go away when I push OK. I cant get it to do anything. It is fully charged, but I can't even turn it off (won't let me), Just continues to post the iCloud Backup message.
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it
Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it
Try:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I purchased an Ipad mini in Thailand in first week of July. Now the screen of the ipad has lost its brightness and smells like somethings burning inside when switched on. I am in Dubai now and want to know if I can have it exchanged here in Dubai?
Contact support and ask them. http://www.apple.com/support/contact/
-
Ever since I downloaded IOS 8 my IPad has been slower, stalling and now it completely crashed and I can't turn it on at all! It's the Ipad 2. Is there anyway I can do?
Hey Basketsopugs,
Thanks for the question. I understand you are experiencing issues with a third-party application after the iOS 7 update. The following article outlines the best procedure for troubleshooting this issue:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks,
Matt M. -
My ipad has a black screen and the apple logo and won't do anything else. I have tried to reset to no avail.
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Hello. My Ipad has a blue screen, and I cannot reset because it is passcode-locked.
Hello. My Ipad has a blue screen, and I cannot reset because it is passcode-locked.
Force iPad into Recovery Mode (Step by Step)
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?
This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
How do I view the list of wireless routers my ipad has successfully authenticated with, and if possible when the last connection to each was made?
The information is of course stored on the device, but currently thee is no way to get to it. It is unknown whether iOS stores the date info for each connection.
As to whether a program can be written, its likely it can, but unlikely it can be done by anyone other than Apple, as by design, 3rd party Apps are not allowed to core system functions like that so its unlikely any App could list your connection history.
As has been said to remove a single connection from the iPad you need to be in range of it, tap the circle on the right side of the router name, and then tap on Forget this network. -
My iPad has the iTunes logo and USB cable on the screen. Can I still back up my music and photos?
My iPad has the Itunes logo and USB cable on screen. Can I still back up my files?
If you haven't already done so, its unlikely.
You can try holding both the home and power buttons at the same time until the apple logo appears on the screen, then let go. -
i have iphone 4s from japan which is a carrier locked (kddi ) it has ios 5.1.1 and now i want to upgrade to ios 6.Can i do the software update or it will cause any harm???
If you have a Japanese iPhone and are using it with any carrier other than Softbank or AU, then it was hacked, since as the others have said neither of those carriers unlock iPhones. Therefore if you upgrade iOS or restore your iPhone, it will lock back to the original carrier and be unusuable with your current cell provider.
We cannot help you with jailbroken iPhones. You'll have to look elsewhere for further assistance.
Regards. -
I am unable to install any applications from the App Store. Every time I try to install an app the iPad refuses to install it and it just says waiting... For hours. Is there a way I can fix this? If so, how?
I have posted these suggestions many times in the iOS forum and a number of these things have worked for other is the past. Maybe one of them will work for you.
Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
I want to use iTunes Match but want to make make sure music will be downloaded from my iPhone (which has all my music) and not just my MacBook to the cloud.
Hi,
All your music need to be in your iTunes library on your computer. You will need to copy your music from your iPhone to your computer.
Read this user tip Recover your iTunes library from your iPod or iOS device
Jim -
Yesterday when I turned on my iPad there was icon that ask do I want to upgrade IOS well I didn't know what that was so I said yes . Well every since my iPad gas gone crazy . When I go to a send button it keeps showing the copy and paste icon over the button . Today I was sending a phone load to friend . It was a $3.85 load . But button kept showing that stupid copy and paste icon so I kept pushing the button . Well I ended up sending $3.85 three times . How do I get the upgrades out or how do I fix my iPad ?
What does this have to do with iPhones much less using them in an Enterprise environment?
Try posting to the correct forum.
Maybe you are looking for
-
How do i sync up my iphone to my car
how do i sync up my iphone to my car
-
New Tab in WBS Elements & need to pull fields from Std SAP Tab to the New
Hi All, I would like to create a new TAB in WBS Element & I need to pull fields from Basic data tab,Origanization Tab,Control Tab & user Fields Tab to the New Tab. Basically my clients wants to see all the fields (based on the requirement) in one TA
-
Problem using webservice method consumer proxy with rawdata from abap
Hello Gurus, I am struggling with an error using a proxy consumer service from ABAP. The proxy was generated using the WSDL from the web service provider. For a specific method we need to send a rawstring as seen bellow: The file to be sent on this c
-
Binding file to update package name issue
I'm trying to change the package name via a binding file, however I'm having issues. The schema within the WSDL is defined as a local schema rather than at http: How would I get the following to work? Thank you for your time 1) WSDL <wsdl:definitions
-
Set variables leads to dump error in SEM 4.0
Hi, I am on SEM 4.0 system.In BPS, i am not able to use set variables feature.whenever i hit this button the system does the process for couple of minutes and finally gives a dump error. I applied this note 806362.No success. Any one to my rescue?