My ipad has problem what sould i do can some body help me pls
i rest my ipad 2 but is link to the person i buy from
iCloud: Activation Lock - http://support.apple.com/kb/PH13695
Activation Lock: Removing a device from a previous owner’s account - http://support.apple.com/kb/TS4515
Try the above. If you cannot contact the original owner then the iPad is useless to you and you need to see if you can get a refund/ Apple will/can do nothing to help you.
Similar Messages
-
Iphone 5, 7.0.4 ios. Phone is keep on going into recovery mode and now it is not restoing through itunes as well. Showing error 9. please help
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process. -
restored my imac from tunderbolt,now i cant startup,if i try to ereas it says.erro,if i try to repair it says ok.my mechintoch hd has been renamed to my tunderbolt.can some one help
Hi, are you really on 10.6.2?
-
it wont let me download anything or update anything it says there is a problem with my previous payment thanks
Yes, you will need to pay it. Contact iTS for more info.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
I can't get the application and data from icould , and i don't know how to solve the ploblem?
It's not clear what you're trying to do. On a computer you can log in to icloud at icloud.com. You can't do that on a mobile device. What is this about VPN?
-
A Problem with my Muvo N200----Can some one help
I bought the n200 bout 3months ago...and while it is is switched on, and when i go to the settings option...no key works...i mean whateverbutton i press, the cursor goes to the next option in the settings rather than selecting it....so...i cant change any setting or do any thing in the settings options...
The recommendation in the?BEFORE you post, READ THIS FIRST (FAQ) post is to try a firmware update.
-
TS3274 my ipad has frozen, what do I do?
my ipad has frozen what do i do?
Welcome to Apple Communities
Do a hard reset (hold Power and Home buttons) and it shouldn't freeze -
My ipad has problem, it gyroscope is not functioning
my ipad has problem, gyroscope is not functioning from yesterday and i did not used.
Are you seeing any error messages?
This Apple doc might help ya out -> iOS: Troubleshooting carrier activation issues
If you have a backup in iTunes, you can recover your data by restoring from backup. -
Can two Apple IDs be linked so that they can share data? My iMac and iPad have the same Apple ID and sync contacts, bookmarks, etc. My wife's iPad has a different Apple ID. Can it be linked somehow to mine to share contacts etc?
No. You cannot link your contacts to hers. However, you can use Home Sharing to share the information:
Understanding Home Sharing
iOS- Setting up Home Sharing on your iOS device
Setting up Home Sharing for Apple TV (2nd & 3rd generation)
iTunes- Setting up Home Sharing on your computer -
I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.. -
My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.
Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not. -
I just purchased a complete series on itunes... Im trying to watch the episodes but its only showing 20 seconds.. can some one help me know what Im doing wrong?
Hi bibisandoval,
Thanks for visiting Apple Support Communities.
If the movie has completely downloaded, I recommend deleting the movie and downloading it again from your list of purchased movies. See this article for the steps:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you are still not able to play the movie, you can report an issue with this purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Regards,
Jeremy -
Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.
Boot from your OS installer disk and run Repair Disk from Disk Utility.
-
My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?
You have the Flashback trojan.
Check out the replies in this thread for what to do;
https://discussions.apple.com/message/18114958#18114958 -
In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks
See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.
Maybe you are looking for
-
Good evening, Can you help me, my trouble is: I have a WDA with my screen elements. Some of tjhs elements have standart search help. When i run my application, i am login to the system, but when i press F4 on the field, login window to the system run
-
How to register the an SAP system in SAP Marketplace?
Hi Experts, I have installed a new sap system. How do I register that in SAP Marketplace? I followed the OSS note 94998. But couldn't get through. I went ot the following path for registering my system: Data Administration >> System Data >> Create Ne
-
Qosmio G10-106: No warranty but motherboard was replaced free of charge
Hey there. I have my toshiba QOSMIO G10 since 2005 and this year my graphic just went bad for any reason, my bad was I had my warranty already expired, so I called Toshiba to inform myself about the price of the mainboard as the graphic card is integ
-
Sidecar file missing - correct status on selected items
Hello, how can I correct the 'sidecar file missing' issue on several selected items in a LR2.3 Catalog? With an external program named 'exiftool' I have manipulated xmp data (xmp:urgency) on selected images by means of a filelist. During this process
-
Import of SAPK-60301INEAAPPL in the phase DDIC_ACTIVATION broke up
Hello, while importing the support packages SAPAH60301, SAPKGPID12, SAPK-60301INFICA, SAPK-60301INFICAX i get following error: Error in phase: DDIC_ACTIVATION Reason for error: TP_STEP_FAILURE Return code: 0008 Error message: OCS Package SAPK-60301IN