My iPad hung when I was trying to restore it

I was trying to restore my ipad and it hung with the apple icon and loading bar. I left it for a while and later disconnected it from my system. I have tried severally to turn it off so the apple icon would go off and also tried to reconnect it to my itunes but all to no avail. Up until now it still has the apple icon and loading bar. Please any ideas what i can do about this?

Try putting it into recovery mode : http://support.apple.com/kb/ht4097

Similar Messages

  • TS3694 hello when  i was trying to restore my phn im getting an error 1015 what shuld i do now plz help me out

    plz help me out for error 1015

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • Can't get rid of error message "MSVCR80.dll" on my windows PC?  Mistakenly clicked on the 'sync to all ipads etc" when I was trying to download an ebook.   Since discovered it is an outdated piece of software that ought to be taken from the net.

         I can't get rid of message "MSVCR80.dll" on my windows XP PC.   I mistakenly clicked on the 'sync pc ipad etc" choice not knowing it was an outdated piece of software.   I need plain english assistance. thanks, self seal

    That's an iTunes error message.  Please post this over in the iTunes for Windows forum.  This is iCloud.

  • When I was trying to get icloud downloaded to my ipad I got an 1603 error. Then my ipad got the beginning hook up to itunes as you get when you first try your new ipad.

    When I was trying to get icloud downloaded to my ipad 2 I got an 1603 error.   Now my ipad 2 is showing the icon tha says to hook up to itunes.

    http://support.apple.com/kb/TS3694#error1603
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • HT201210 please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins but then it shows unknown error 101

    please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015

    Stop being impatient.
    From the article that the question was posted from:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed.   Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    You cannot downgrade.
    If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.

  • I recently set up multiple accounts and when I was trying to figure out how to share files I messed up something in my documents. Everytime I open a doc from the ADMIN account, a box pops up that says "The file is not in the correct format" how to fix?

    I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?

    Without knowing what you did it is impossible to give advice on how to correct it.
    If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
    Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive.

  • I bought my iphone 5 in the USA but am living in the UK. When I was trying to download apps, it said i need to connect to the uk apple store, how do i do that?

    I bought my iphone 5 in the USA but am living in the UK. When I was trying to download apps, it said i need to connect to the uk apple store, how do i do that?

    Settings > iTunes & App Stores
    Tap on your Apple ID at the top
    Tap "View Apple ID"
    Enter password if needed
    Tap "Country/Region"
    Tap "Change Country or Region"
    You may need to change to a UK credit card.

  • I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    If you have been backing up on Timemachine.
    All you need to do is enter time machine... Then the rest is obvious.
    Find the iTunes folder and hit 'Restor'.
    If not the only way to get all your iTunes music back is to enter iTunes Store.
    On the right hand side you should see 'Purchased'.
    Click 'purchased' and there you have it.

  • TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

    I have an iPhone 3GS and was trying to restore it...
    Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
    Any ideas on how to get it working again?

    This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier.  It will now accept a SIM card only from that carrier.
    Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking.  Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

  • HT4437 I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect.   What can I do to fix this?

    I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect.   What can I do to fix this? 

    Try restarting your router as a first thing, this sometimes works for me.

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • When i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync  options,how can i change that option,can any one help me.........?

    when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync  options,how can i change that option,can any one help me.........?

    I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
    Thanks very much for your feedback.

  • I was trying to restore my itouch and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin

    i was trying to restore my itouch because it showed on my itouch the itunes bar on top and the charger on bottom so i went on itunes and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin will free up additional space. What do I do?!?!?! please help me ASAP

    Hi
    I followed this guy's instructions and it worked:
    http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
    I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
    Cheers for you help.
    Andy
    Message was edited by: bigbadandy

  • identifier expected � why show up when I was trying to compile !

    When i was trying to add another botton as a " buttonAdd " I will get the error message so I would be glad to help me , please !
    import java.awt.*;
    import java.applet.*;
    import java.applet.Applet;
    import java.awt.event.*;
    import java.awt.image.*;
    public class PhotoAlbum extends Applet implements ActionListener{
    // declare all the components
         Button
                   previous = new Button("Previous"),
                   first = new Button("First"),
                   last = new Button("Last"),
                   next = new Button("Next");
                   buttonAdd = new Button("Display");
         Canvas
                   imageCanvas = new Canvas();
         final int total = 10;               // total # of images
         int i = 0;                    // this is value of currently displayed image
         Image Pictures[] = new Image[total];
    public void init() {
         makeGui();
              // get all the images
              for (int p=0; p < total; p++) {
                   Pictures[p] = getImage(getCodeBase(), "Photos/image"+p+".JPG");
                   prepareImage(Pictures[p], this);
         } // init
         private void displayImage(int n) {
              // Display the nth image on the canvas
              Graphics g = imageCanvas.getGraphics();
              g.clearRect(10, 10, 400, 400);
              g.drawImage(Pictures[n], 30, 10, this);
              g.drawString("Image: "+(n+1)+" � "+total, 30, 380);
         } // displayImage
         public void drawFirst(){
              displayImage(0);
         } // drawFirst
         public void drawLast(){
              displayImage(total-1);
         } // drawLast
         public void drawPrevious(){
              i = i - 1;
              if (i <= -1){
                   i = total-1;
              displayImage(i);
         } // drawPrevious
         public void drawNext(){
              i = i + 1;
              if (i == total){
                   i = 0;
              displayImage(i);
         } // drawNext
         public void actionPerformed(ActionEvent e){
              if (e.getSource() == previous)
                   drawPrevious();
              else if (e.getSource() == first)
                   drawFirst();
              else if (e.getSource() == last)
                   drawLast();
              else if (e.getSource() == next)
                   drawNext();
    else if (e.getSource() == buttonAdd)
                   drawLast() ;
         } // actionPerformed
         public void paint(Graphics g) {
              drawFirst();
              i = 0;
         private void makeGui() {
              setBackground(Color.black);
              setForeground(Color.white);
              setLayout(new BorderLayout());
              Panel p1 = new Panel();
              p1.add(previous);
              p1.add(first);
              p1.add(next);
              p1.add(last);
              p1.add(buttonAdd);
              add(BorderLayout.NORTH, p1);
              add(BorderLayout.CENTER, imageCanvas);
              previous.addActionListener(this);
              first.addActionListener(this);
              last.addActionListener(this);
              next.addActionListener(this);
              buttonAdd.addActionListener(this);
         } // makeGui
    } // PhotoAlbum

    Because you left the semicolon at the end of the line before it, instead of changing it to a comma.

  • Could someone help me restore my photos?  I was trying to "restore my database" in iPhoto when it shut down - now my thumbnails are distorted, logged under a new name, and when you click on a thumbnail it opens as another photo.  I was following another "

    Could someone help me restore my photos?  I was trying to "restore my database" in iPhoto when it shut down - now my thumbnails are distorted, logged under a new name, and when you click on a thumbnail it opens as another photo.  I was following another "helpful hint" hold down the option and command key and restart iPhoto - select the top three and you should be able to get rid of the dreaded exclamation point.  My MAC ran through the first two options dealing with thumbnails, but crashed during the "restore database"  step and now I have a mess.  Help, please.  Thank you.

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

Maybe you are looking for

  • Closing open orders

    Hi, Can someone help explain the following?: If I click delivery complete on an item to close a PO, will the system try to reorder the material if qty is below safetystock? Does a the workorder have to be open? Thanks, Rob

  • How to connect Foxpro Database

    Hi all, I have CF MX 7 on Windows XP environment. I have worked in coldfusion earlier with most of the databases except foxpro. Now, I got a code and some dbf files that are currently working in production environment that is on unix platform. I just

  • Garnishment Payment

    HR would like to perform a garnishment bank wire to the state.  the state vendor's master data is set up with a payment methos of "T".  However, after third party is run the line items indicate a payment method of "C."  Each line item is then changed

  • Use EVALUATE_PREDICATE function as filter in an anlysis

    Hi guys, I'm struggling to get the proper syntax to use the EVALUATE_PREDICATE as a filter on a column in an OBIEE analysis. I'm using an EVALUATE function to determine the rank of 'Test Naam' in the result set (CAST(EVALUATE('DENSE_RANK() OVER (PART

  • G$ FW800 stock optical drive not seen in System Profile - is it daid?

    I added a USB PCI card (2.0) to my FW and shifted some files (Migration Assistant) to my FW by Firewire from an eMac and then I wanted to run Diskwarrior to sort it all out. My CDW/DVDR wouldn't open, either with the eject key or through Toast. Not r