My iPad is asking me to submit my apple ID to use the messaging feature. It's not wrong but it won't sign in.
My iPad is asking me to type in my password to be able to send iMessages the password is not incorrect but it won't verify it. It doesn't say it's incorrect and I'm signed in to my iCloud account under the same username nd password.
Try Here > Troubleshooting Messages
http://support.apple.com/kb/TS2755
Also. See Here > About Messages
Similar Messages
-
When I try to use the Message feature on my iPad 2, to send a message to a friends iPhone (on iOS 5 too), why will it not allow me to send the message?
Check to make sure you are not typing your message in the Subject line. If you are, it won't let you send the message. Cut and paste the message into the Message field and you should be all set.
FYI, you can disable the Subject line from your messages in Settings/Messages. -
My new ipad didnt ask me register to my apple account
my new ipad didnt ask me register to my apple account on apple. can someone help
It's done automatically when you type your Apple ID on your iPad during the initial setup.
However, if you want to check if it is registered, open http://supportprofile.apple.com and log in with your Apple ID. Your iPad should be listed. If not, press Add Product and type your iPad's serial number > http://support.apple.com/kb/HT4061 -
I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host> -
I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?
Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device -
Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's going on? Do I have to wait to OS update? It seems lots of peolple were having issues before ML, but I as fine. Since ML, I am having all kinds of issues!
Yeah, I literally have tried everything except deleting my iCloud account (I'm close, but that would require so many changes that it is way too painful to consider at this point).
I am still waiting to hear back from Apple Support. Hopefully something can be done, or they can do a reset on their end.
Thanks for taking the time to respond though, much appreciated! -
Why is the sound of my new ipad cutting out intermittently and what does Apple recommend to solve the problem in lieu of any updates? All of a sudden without changing any settings, the audio on my NEW ipad cuts in and out on applications/ games, keypad noise and lock sounds. The rocker button only seems to work while the sound is intermittently being heard before, after a few seconds of noise not doing anything when sound goes off.
This is highly frustrating as I've noticed others posting about such issues as far back as April. Anybody had the same thing happen to them? Is this likely software (ios6) or hardware issue? What are the solutions Apple???Apple has no physical stores of their own in Dubai, so unless you mean that you purchased from the online Apple Store for the UAE, you purchased from a dealer, who may or may not have been authorized. You can check the expiration date of the warranty on your iPad yourself by entering in the serial number here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If it does indeed show the warranty has expired, then what you need to do from here will depend on who you purchased the iPad from and when you really did purchase it. Perhaps you actually purchased it in August and are just misremembering? Check your receipt. If you confirm that you did purchase within the last calendar year, tell us exactly where you got it and we can probably offer advice.
Regards. -
I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only serial number I see is when I registered the Photoshop Elements 2.0.
The serial number will be on the disc case, not the outer box. Find your serial number quickly
-
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?
First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier. -
Plugged in my iPad Mini into my computer and it would say next to the battery Bar "Not Charging" , and I'm wondering what this means. Thank you!
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I bought an application 10 months ago. When I did an update on my ipad, I needed to re-download, and Apple charged again for the same Applicative.
Did you follow the directions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
The people's posted videos no longer work on my ipad
Note: I am using the Facebook app, I am not using safari
Please don't tell me to use adobe flash player, it is not compatible with ipad, but it used to work nevertheless.Facebook videos are still working for me in the Facebook App (using iOS 7.0.6).
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
I lost my ipad 2 and I have also an iphone ! I used the app "Find iphone", it gave me the localisation of my iphone only. How to find my ipad?
If you activated the Find My iPhone service (in Settings>icloud), and if the device's batteries still have a charge, the device is not turned off and has not been reset and is connected to the net, then you can try to track it. Using a computer's browser, log into icloud.com and look at the Find My iPhone page. Or - on a device, invoke the Find My iPhone app and log into the icloud account. Note: The Find My iPhone **app** does not turn on the service, you can only do that through Settings>icloud.
If the device is listed as "offline", then one of the requirements listed above is not met (like being connected to wifi, or if the device was stolen and the thief reset it).
Look over this link...
http://support.apple.com/kb/HT5668 -
When I want to syncronize my photo's from my computer to my Ipad, I get the message "itunes photoprocessor was not installed correctly, please reinstall itunes, error 7"
When I did so, the same message appears again and again.
Anyone knows the solution?
Thanks on forhand.Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button
Maybe you are looking for
-
Hi. I'm making a DateTimePicker (DTP), and I need help on getting a method to return a Date only when the DTP is closed, and I want this to be done in the DTP class itself. For now, I've used an infinite loop and it seems to work fine without lagging
-
Smart Object opening as .jpg instead of .psb
I received a file from another person – I didn't create it. It contains a Smart Object, which is indicated in the layer thumbnail. When I double-click to edit the smart object, a .jpg file opens, not a .psb. I know I can flatten it after making the c
-
Creating a Report of Network Discovery
In SCCM 2012 R2 after we have enabled Network Discovery, could someone help with a query to list the devices discovered as a report?
-
Issues discovering IPhone5 personal hotspot on wifi
I have a MacBook Retina, using OSX 10.9.3, I usually use personal hotspot on my IPhone5, while it works fine when I have the IPhone connected via USB Cable, If I want to connect via WIFI, it doesn't properly discover my IPhone wifi hostspot (I dont s
-
Upload 100 GB data into sharepoint 2013 site
Hi Team, I want to upload 100GB data into sharepoint 2013 site for performance testing. I have the 5 document libraries. I want to upload the 10GB data to each document library in the site using powershell. Is it possible or not? Can you explain the