My iPad is blocked after I tried to update

Tried to update my iPad now it's blocked asking to connect to a computer once I do it it tells me I might loose my info do I loose everything in iPad if I reset to original settings?

Hi there
Have you tried doing a hard reset before doing anything (Home button + Power button for 11 secs or untill you see apple logo).
If this hasint fixed your problem you better hope you have a backup either on iCloud or on your computer because your going to have to reset it im sorry to say.
This problem may of been caused by interuption of instaling the update.

Similar Messages

  • After I tried to update my Ipad mini, it kept saying hello in different languages on my lock screen and then when I slide across, it says connected to itunes but it's not doing anything!! Please help!!! And by the way it's plugged into the laptop to itune

    After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • After I tried to update my ipod to iOS 5, my ipod screen turned to the screen of the cherger cord pointing to the iTunes symbol. when I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes  and i did download t

    After I tried to update my iPod 4 to iOS 5, my screen turned to the USB cord pointing to the iTunes symbol. When I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and I did download the latest version of iTunes (11.1.1). I tried to restore it again and the same error occured. I dont understand half of the instructions for the resolution of the 3014 error code so I did the instructions that I understood and nothing has changed. Please tell me how I can fix it.

    Just what do you not understand?
    Did you try:
    Try to restore from another known-good computer and network.
    Error 3014
    This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How can i get ios 7 in my ipad 2? i have tried to update it but in my setting general there is no icon for software update.so help me please!

    how can i get ios 7 in my ipad 2? i have tried to update it but in my setting>general there is no icon for software update.so help me please!

    If you are using iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
    To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
    See here: http://support.apple.com/kb/HT4972

  • My iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4.

    my iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4. My Phone refuses to turn on. i bought my iPhone from someone else and i don't know if the warranty is voided, how can i find out if is voided ?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My iPad works perfectly except when trying to update apps.  Then I get a message that says "Cannot connect to the iTunes store."

    My iPad works perfectly except when trying to update apps.  Then I get a message that says "Cannot connect to the iTunes store."

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
    If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months in the future and then re-trying

  • Ipad mini blocked after 10 times wrong password. How to reset

    After 10 times the ipad is blocked
    I downloaded itunes on my windows(7) laptop but didn't make a back up on this computer., no result
    When connected to the laptop it comes with: device blocked because of wrong password, the other time error 0eX8000084.
    I removed everything from Apple and downloded again Itunes.
    Have anybody a solution for my problem?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
     Cheers, Tom 

  • IPad won't turn on after I tried to update it.

    Hey. So I tried to update my iPad to 7.0.6 I think but it said there was an error and now my iPad screen is stuck on the iTunes Logo and the cable. I've tried turning it off by holding down the lock button and the home button but when it turned back on, it was the same screen and iTunes won't recognise my iPad. Help please!

    Your iPad is in Recovery Mode.
    Follow the instructions here carefully:
    http://support.apple.com/kb/ht1808

  • Ipad mini frozen after ios 8.3 update

    I tried to update my iPad to iOS 8.3 today and the first time it was updating on the actual settings so I could still use my iPad but then I lost internet connection and I tried to update it today and it went black with the apple logo and a bar measuring the progress of the update. Anywyas,I'm not sure if it was about to complete or had completed but it went black with the Apple logo in the middle. I held down the home and on/off button at the same time and after a few seconds the screen goes black then the screen with the apple logo comes on then it goes black again. I then tried to turn it on by pressing the on/off button but it goes and stays on the screen with the apple logo so we're back to square one. I've tried holding them down a few times now but I keep getting the same result. Any help? The iPad first went into the logo about 6 hours ago. I thought it would take time for the device to process but seeing no result I tried the pressing both buttons method andnow iI'm asking if any one knows what I have to do? Thanks

    You can preform a DFU restore.
    Follow my steps:
    - power down your iPad
    - Hold down the home button and don't let go
    - Plug the iPad to your computer
    - Do not let go the home button
    - ITunes will prompt you that the iPad is recovery stage
    - Restore your iPad
    You should be all set and updated issue free.
    Cheers!

  • My iPhone 4 is stuck in recovery mode after I tried to update it, & itunes won't let me restore my phone! Help?

    So after trying to update my phone to ios7, it got stuck in recovery mode. I tried plugging it into my computer and itunes, and itunes recognizes that an iphone is plugged in. TThen when I click "restore my iphone", it says on itunes that it is in the process of restoring my iphone. An apple with a loading bar would pop up on my phone and then the loading bar would fill up, and then I would get an error message on my computer saying "Could not restore iphone, Error 2117" or something along those lines. I didn't have the new itunes, so I brought my itunes up to date. Now that I have the new itunes, I tried restoring the phone again. This time, when I plug in the phone, the computer recognizes it and says that its restoring my phone, but the my iphone was still stuck on the screen for recovery mode (white usb pointing at the itunes logo). Does anyone know how I could restore my phone? :/

    This reply isn't to shorty2006, that post was awhile ago. This is for everyone that updates itunes and gets an error that their phone is now in Recovery mode. 
    I've been researching all night and even thought about downloading several different things that were suppose to get my phone out of "Recovery" mode.  Then I thought about taking my phone to the Apple store after work tomorrow.  I then found this blog and read coltonkj's entry and tada!  I took a big breath and hit "restore".  It worked, it put me back to the page where you can select to restore the last back-up.  Shooooo!!!!
    Thank you coltonkj !!!!!!!!!!!!!!!!!

  • My phone is not working after i tried to update it to IOS 8!

    Hello everyone, i hope that you can help me with my problem!
    Yesterday i tried to update my Iphone 5s to ios 8 via itunes on my mac. After a while it displayed that there was an error an it stopped. After that i tried to open my phone and it was in recovery mood! i couldn't get out of the recovery mode so i searched my problem online and it said that i have to download a program called Recboot. I did and it had two optiond either to exit or enter the recovery mode and i pressed exit of course but then it started to show the apple logo then it flashes a blue screen then goes off then the apple screen again and everything goes in a loop and never stopes until i completely close the phone! now my laptob can't even identify the phone, so i can't even recover it or restore it and i don't know what to do! Please HELP me, i'm desperate

    I had the same problem, I connected to a different computer that had itunes. It also was oneI never connected to before. I held the power botton and homebutton till it showed up connect to itunes. I opened up it tunes and it said my phone needed a phone software update, i folled the prompt and set it up as a new phone. Then i resored it, then put it on the computer u usually sync it on and restore it to a date the phone was working to, this helped me, if u want i can help u over the phone if u cant get it, let me know and i will send u my number over my email address, hope it works, basically i swiped the phone clean and reinstalled all software by taking these steps

  • IPhone is stuck in recovery mode after I tried to update it. What can I do?

    I tried to update to iOS 4.3, It seemed to be working fine until it displayed this error notification - http://26.media.tumblr.com/tumblrlhuulwwGjV1qbpguwo1500.png My phone is now stuck in recovery mode and I cannot restore it, I can only "restore and update" and its the update which isn't working.
    Someone told me to download 4.2 online and restore it, I have downloaded it but I don't know how I can install it back on my phone
    Please can anyone help? this is urgent!

    This reply isn't to shorty2006, that post was awhile ago. This is for everyone that updates itunes and gets an error that their phone is now in Recovery mode. 
    I've been researching all night and even thought about downloading several different things that were suppose to get my phone out of "Recovery" mode.  Then I thought about taking my phone to the Apple store after work tomorrow.  I then found this blog and read coltonkj's entry and tada!  I took a big breath and hit "restore".  It worked, it put me back to the page where you can select to restore the last back-up.  Shooooo!!!!
    Thank you coltonkj !!!!!!!!!!!!!!!!!

  • TS3694 I am unable to update my ipad. Error 3194. also trying to update itunes from 10.6 to 10.7 with no luck. I click update and nothing happens. help??

    Error message 3194 when trying  to update ipad. help?

    Follow this troubleshooting guide.
    Be aware that this procedure could be fairly longwinded:
    http://support.apple.com/kb/TS3694#error3194

  • HT201210 It says my firmware file is not compatible after I tried to update my IPhone 4. Does anyone know what this means?

    Hello,
    I tried to download updates on my IPhone 4 and a message box appeared saying--after it downloaded the updates on my computer--that my firmware file is not compatible. Does anyone know what this means?
    Thank you

    Only the individual that set the restrictions passcode knows what it is.
    If you do not know it or have forgotten it, put the device in DFU mode (google it) and restore as new.

  • My iphone4 is not working after I tried to update it and it wont let me restore it?

    My husbands iphone 4 is refusing to restore or really do anything since he tried to update it to the new operating system. It just alternates between the apple sign, and the thinking circle.  I updated mine on the computer right before he tried so we know its not the computer settings. I updated itunes and went through the trouble shooting guides.  It was not connecting with itunes at all so I updated the device connector.  Now it will connect sometimes as an unknown iphone but will not let me restore it and says it is a (-1) error. What should I do? Apple support was supposed to call an hour ago and still hasnt called.

    I had the same problem, I connected to a different computer that had itunes. It also was oneI never connected to before. I held the power botton and homebutton till it showed up connect to itunes. I opened up it tunes and it said my phone needed a phone software update, i folled the prompt and set it up as a new phone. Then i resored it, then put it on the computer u usually sync it on and restore it to a date the phone was working to, this helped me, if u want i can help u over the phone if u cant get it, let me know and i will send u my number over my email address, hope it works, basically i swiped the phone clean and reinstalled all software by taking these steps

Maybe you are looking for

  • How to create Transport request in R/3(ECC6)

    Hi all, Can somebody tell me how to create the transport request in ECC6.0 Regards Kiran Kumar

  • Restart programmaticaly portal service in a cluster

    Hello, Is it possible to restart services programaticaly in a cluster environment from one iView? Any help will be appreciate. thanks. Pino.

  • Network resource wise confirmation

    Dear All Is it possible to confirm production on resource network? Such as I have a plant that contains three parallel resources producing same product. I want to create a single process order and enter Goods movement for individual work centers prod

  • Scanner not recognized by Photoshop

    Hi there, I bought a new iMac G5 four days ago only to find Photoshop CS5 was not recognizing the scanner on my two year old Samsung SCX 4500 Printer/Scanner (the printer works fine). I downloaded the most recent Samsung scanner driver (1.0) and Phot

  • Adding document type

    dear all, I have a requirement ,In S_ALR_87012271 report i want to filter the values based on document type , but there is not characteristic in available characterstics of the field . path, go to fsi2 -select the report of  above tcode double click