My ipad is disable and wants me to connect to itunes after i plug it in it is connected to the camera instead what do i do

my ipad was disable because i forgot the passcode. it wanted me to connect to itunes so i plug it into my computer when it pop out it said it is connected to the camera so what do i do

Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
  3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the screen pictured below,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
  4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
  5. If necessary, open iTunes. You should see the following "recovery mode" alert:
  6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Similar Messages

  • HT5858 My iPad is disabled and wants a 4 digit number as a pass code.  All I have is my Apple ID and password.  I do not know how to get to my number or reset it

    My iPad is disabled and wants a 4 digit number as a pass code.  All I have is an Apple ID and password.  How can I get this fixed?

    Karen ..
    Try here   >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • HT204306 my ipad's disabled and while restoring, it keeps on requesting for an update but whenever i try to download the udpates an error occurs, plz help

    my ipad's disabled and while restoring, it keeps on requesting for an update but whenever i try to download the udpates an error occurs, plz help

    You might want to try disabling your firewall and antivirus software while you attempt to update/restore.

  • My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...

    My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...

    Those Links are working here...
    Try this one,
    iPad Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • My ipad is disabled and i have to connect to itunes what do i do

    my ipad is disabled and i have to connect to itunes what do i do

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My iPad is disabled and it says to connect to iTunes with my Mac. Its not working. How can I get my iPad to work?

    My iPad is  disabled and it says to connect to ITunes with my Mac. It still is not working.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My ipad says ipad is disable and it needs to connect to iTune?

    I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost
    Message was edited by: Diavonex

  • TS1368 I've updated my iPad to OS7 and now can't connect to the App Store. It works on my phone and interject connection is fine. Any thoughts?

    I've updated to OS7 on my iPad and now can't connect to the App Store.  The internet is working and it works on my phone, though slow;  is this an App Store problem or a problem with the software upgrade? Am I alone with this issue?

    belive it or not this worked for me:
    “Go to Settings > General > Date and Time > Set Automatically > Off. Set the date one year ahead. Try to update the apps again or press the button from Passbook. If you get an error message, go back to the Settings app and change Date and Time > Set Automatically back to On. Then go back and try again.”
    please note that when you go to app store when you change time to future go through passbook / and close the app then and then wehn you set time back to auto go back to app store through passbook and it will work then close it and then normal app store icon will work form now on
    good luck

  • Macbook pro keeps saying connection timeout, and it used to connect to the internet fine. what's up, why can't it find and automatically connect to the internet anymore???

    Macbook Pro keeps saying connection timeout and it used to connect to the internet fine. What's up, why can't it find and automatically connect to the internet anymore???

    Like this: https://discussions.apple.com/thread/2775868?tstart=0  ?

  • My Ipad is disabled and is telling to connect to Itunes?

    I have forgotten my PassCode and my Ipad says 
    Ipad Is Disabled
    Connect To Itunes
    What do I do??
    Need Help Urgently pls Help!!!!!!!!!!

    http://support.apple.com/kb/HT1212
    You'll want to follow this article if you have a computer you sync constantly with iTunes with. If you don't then you can restore the device to factory default to reenable it.

  • My ipad is disabled and requesting me to connect to itunes but itunes is telling me to put in password to be able to access itune. What should i do?

    my ipad is disabled. What should i do?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My ipad is disabled and i am not synced to itunes. How do i enable my ipad?

    My mother in law got an ipad for christmas. She put in the wrong pass code one too many times and now it says it is disabled and to connect to itunes. The problem is, my girlfriend never synced in to an itunes account before giving it to her. So itunes is not recognizing her device. How do I enable the ipad without i tunes?

    Hi swi,
    Follow the instructions in the following support article that best address your situation:
    http://support.apple.com/kb/HT1212
    Cheers,
    GB

  • HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

    How do i restore an ipod that has been disabled and has never been conected to itunes

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • My Airport base station has a status message that says "This AirPort base station doesn't have any DNS server addresses and might have trouble connecting to the internet." What does this mean and how can I fix it?

    My internet is still working, but it's very intermittent. This happened after I updated the firmware a few days ago.

    Did you remember to completely power cycle the entire network?
    You would want to do this after any update or change to the network.
    If you did not do this yet......things are out of sequence.
    Power off everything on the network.....all devices.....power down order is not important
    Wait a few minutes
    Start the modem first and let it run a minute or two by itself
    Start the next device connected to the modem the same way
    Work your way out on the network starting each device about a minute apart
    Check the network

  • HT4113 My daughter put a passcode on my iphone and now it disabled and wants me to connect to itunes. I did that but i am not at my home with my computer. How can I reset this passcode?

    My daughter put a passcode on my iphone and now it is disabled. I am not at home where my computer is. I tried itunes already. Anything I can do?

    You can only do it via iTunes. You'll have to force it into recovery mode.

Maybe you are looking for

  • 521 Rejeição: CFOP não é de Operação com Exterior e UF destinatário é EX

    Olá, Bom Dia a Todos Foi criada uma nota fiscal writer com a categoria I1, saindo de São Paulo para um cliente do Rio de Janeiro, na operação foi utilizado um CFOP incorreto, de dentro do estado, ou invés do interestadual. Neste cenário a SEFAZ retor

  • Search index not working in String

    Hello all,      I am using String.search(any sentence) in Flash builder 4. If my sentence to be searched include some special characters such as (), then String.search()      returns -1 although  that sentence is present in the text. However, if I us

  • Dependency between a datasource and a J2EE application, possible?

    We have a J2EE application which makes use of a datasource. The application on startup does some database related activities using this datasource. As a result we need to make sure that the datasource should be started before our application starts.

  • Oracle Database Migration Verifier - Is it part of Oracle 10g Client or Ser

    Hello, I have some restrictions on downloading the tool from Oralce Website. Can I know if this is part of Oracle 10g Suite ,either Client or Server. Please let me know this useful information. Regards, Ramanathan.K

  • Missing Folio Builder Panel

    I'm running Indesign CS 6 and recently updated DPS desktop tools. Since then, the Folio builder panel went missing and I can't get it back. Please help! Actually, there is the whole windows>extensions tab missing and the extension manager is not show