My iPad is disabled and i didn't back it up on iCloud but i don't want to lose my data. What do you suggest to do? I also forgot the password

disab

iOS: Forgotten passcode or device disabled after entering wrong passcode
Without an iCloud or iTunes backup, you will lose your data.

Similar Messages

  • HT201210 In updating my iphone for the new software ios6. An error occurred and now is asking me to restore settings.  But I don't want to lose my data

    In updating my iphone 5 for the new software ios6. An error occurred and now is asking me to restore settings.  But I don't want torestore setting causing not all of my recent data has been synced and I don't want to  lose my data. How can I undo this since i did not hit restore settings, yet i can't do any other move without restoring at this point. Any ideas?

    You phone is in recovery mode.  Your data is already gone.
    Why you would attempt a software upgrade without backing up all your data first is beyond me, but to each his own.
    In any case, sorry for your data loss.

  • The computer I use for Itunes only has XP so I can't use ICloud. My desktop has Vista so I can use it. But I don't want to lose all of what I have on my Iphone 4S and my two Ipads. How can I use the desktop and retain the apps, music, podcasts etc. I have

    The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
    I have a desktop that operates using with Vista.
    I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
    I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
    Isn't there a way to do this? Shift my library FROM my devices to the desktop?
    Thanks

    This is a tedious solution, which is stupid!  And some users report an inability to reauthorize a computer after an "en masse” deauthorization.  I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
    And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

  • HT201274 I have erased my Ipad remotely thinking it was stolen.  It has now been returned, but I don't want to switch it on and erase all information.  Can I reverse the erase?  If not, how do I restore the info?

    I have erased my Ipad remotely thinking it was stolen.  It has now been returned, but I don't want to switch it on and erase all information.  Can I reverse the erase?  If not, how do I restore the info?

    You can't reverse the erase.
    Restore from your iTune or iCloud backup.

  • I've just upgraded to latest version of Firefox 4 and my Mac is only OSX.10.4.11 and it won't open. How do I downgrade and get old Firefox back. Don't want to lose all my bookmarks. Why was I able to install in the first place. Very frustrated!!

    've just upgraded to latest version of Firefox 4 and my Mac is only OSX.10.4.11 and now it won't open. How do I downgrade and get old Firefox back. Don't want to lose all my bookmarks. Why was I able to install in the first place. Very frustrated!!

    You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    You can trash Firefox 4.0 then re-install Firefox 3.6, it will use your existing bookmarks, passwords etc
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • HT201442 I don't know what to do about my ipod touch, I forgot the password so I cant get in, what should I do?

    I don't know what to do about my ipod touch, I forgot the password so I cant get in, what should I do?

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.

    I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.

    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
    Above from:
    http://support.apple.com/kb/TS3694

  • Updated games and they have been waiting for almost 24 hours.  I don't want to lose the progress on the game by deleting and re-installing.  Any suggestions?

    Updated games and they have been waiting for almost 24 hours.  I don't want to lose the progress on the game by deleting and re-installing.  Any suggestions?

    See:
    Downloading apps stuck on waiting...: Apple Support Communities

  • IPad 2 went in Recovery Mode and I don't want to lose my data

    Well, hello.
    I have a big problem with my iPad2. From the begining: I wanted to update the iOS to 7.1.2. The progress bar appeared and I left it like that. When I returned, it showed me that I have to connect the device to iTunes. When I did this, it said that I have to restore it. The big problem is that I don't have any back-up of my iPad. I had, but my old laptop broke and I can't open it anymore. So I got a new laptop (Windows 8) and never connected the iPad to it, only now, when it is in Recovery Mode and... I tried to hold the Home+Wake up button both pressed in the same time, but still no change: the Apple logo appears only for a few seconds and it goes back to the Recovery Mode screen. I also downloaded TinyUmbrella from here: http://tinyumbrella.en.lo4d.com/ but nothing happened (it appeared something like TinyUmbrella: Verifying libraries, reticualting something). I also contacted the service in my country, but they said that nothing can be done, I have to restore it and, by this, erase all the data on it. Please, is there any way in which I can save the data? I'm more than desparate

    Yes, I know... I discovered now that I have saved the photos I wanted from it long time ago (for the same reasons, i didn't wanted to lose them). So I'm kind of saved. Also it has been like crap because the laptop where I had my backups is as dead as can be. That was the moment when I panicked. From now on... I'll back-up it everyday. Thank you a lot!

  • HT203175 My iPod touch is off and I can't turn it on because when I try, it has the iTunes logo and a usb pointing to it...and when I connect it to my computer and try to open it to iTunes, it says I have to restore it, but I don't want to lose all my pic

    My iPod touch is off and wont turn on because it has the itunes logo and a usb pointing to it, so when i looked it up online, it says i have to restore it but i don't want to because i don't want to lose all my pictures. What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Help! My iPod is corrupted and i don't want to lose my data.

    When i connect my iPod to PC its screen normally shows "do not disconnect" and it's charging, but when iTunes starts it only reports: "iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting iPod." i tried reconnecting iPod many times, rebooting system even reinsalling iTunes but with no effect. When i try to open iPod disc from My Computer it only says that: "this disc is not formatted, would you like to format it now?"
    I just don't know what to do... Is there any chances i can fix this problem some other way that using the "restore" option in iTunes and losing all my data? Some of them are priceless to me. Please help.
    Athlon XP 1700+   Windows XP Pro  

    Generally, if you need to Restore, the data is pretty much gone on the iPod.
    ve got there some important data which i don't want to lose
    And since this data is important, you do have it on the computer and backed up on CD/DVD also, correct?

  • Problems with iPhoto lib after mavericks upgradening iPhoto says upgrade and pref lib will be unreadable after lib upgrade.  Help-don't want to lose all prev pictures in lib.

    After upgrade, attempted to open iPhoto to upload pictures from camera.  Message says need to upgrade library and that after upgrade previous library will be unreadable.   In holding pattern for now-don't want to lose all 4K prev pictures in iphoto library.  Anyone have same or similar problem?

    gotitans, I think you have an entirely different problem than we are discussing in this thread.
    You should open your own thread, and you should describe your problems in more detail. For example, what type of Mac do you have, what operating system does it run, what version of iPhoto did you have running before the upgrade,and just what sort of upgrade did you do (hardware, operating system, iPhoto, something else)?
    My best guess from just that message is that you did a hardware upgrade, and your version of iPhoto is too old to run on the new hardware.
    ntgerh64, it would probably be good if you gave us the same details I asked of gotitans. I was assuming you were talking about upgrading OS X to Mavericks and then iPhoto to 9.5 or 9.5.1.

  • I recently changed email addresses and updated my info in the ID and ICloud but when I go to download an app my old email comes up. I no longer remember the password associated with that account an I no longer have access to it. What do I do?

    I recently changed my email on my apple id and in ICould but every time I try to download an app my I'm email apple id pops up. I no longer have this email account and do not remember the password associated with it.  What do I do?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    Willow37 wrote:
    I no longer have this email account and do not remember the password associated with it.  What do I do?
    If necessary...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...

  • I want to remove some photos from my iPad--but I don't want to remove them from my Mac. How do I remove photos using the iPad itself?

    I want to remove a few photos from my iPad, but not from my Mac (from-to which I sync). Is this possible? I can get the "delete" button to show on the iPad, but it is not fully lit--i.e. pressing it does no good.

    You can delete photos that you took on the pad, and photos that you imported from the camera connection kit right on the pad.  That delete button will work on those.
    Photos that you synced from the mac get deleted by resyncing.  When you connect the pad, push the photos tab, uncheck sync all, and then select only the photos you want on the pad.   The mac acts like the master storage unit, and all the photos will stay there (unless you delete them in i photo) and copies are placed onto the pad.
    Photos you take on the pad, by the way, dont get moved to the mac during a sync, you need to import them to iphoto.  While the pad is connected, open up i photo, and the pad will show up as a device on the left side.  You can select which pad photos you want to import.  Those photos are now part of the master copy on the mac, and can be synced back to the pad, or not, as you decide.

  • What do you do in Mail when it says the password is not secure?

    When I try to use Mail, it says the password is incorrect. When I try to enter the password, it says the transmission will not be secure. Is there any way around this? I can use my Comcast mail account, but I want to send directly through Mail.

    I went to phone<voicemail, but it only gave me option to Edit (which I can only delete one message at a time) or Greeting.  I don't see "deleted messages".  I have a 4 and updated to IOS7.

Maybe you are looking for

  • After Effects CC 2014 Crashing on Start-Up

    I downloaded/updated to the latest CUDA driver ... CUDA Driver Version: 7.0.29 and now After Effects CC 2014 crashes instantly on start-up ... I'm on a MacBook Pro (Late 2013) running OS X Yosemite 10.10.2 with an Intel Iris Pro 1536MB card, 2.3 Inte

  • Contention for latches related to the shared pool was consuming significant

    We are having performance issue on our database. When I look at the AWR, I see that there is a contention for latches. Below is the AWR Report. ADDM Report for Task 'ADDM:1775307360_12808' Analysis Period AWR snapshot range from 12807 to 12808. Time

  • Why the artwork of the album does not display?

    I updated my ipod touch to iOS 5.0.1 and since then, the musc+ic synched to the ipod but missed all the artwork of the albums, which still is in the itunes library

  • Drill Down Options in Planning & HFM

    Hi All, What are the drill downs option available in Hyperion Planning & Financial Reporting. Regards, PC Edited by: dwhpc on Jul 23, 2009 10:31 AM

  • How to refresh the page/table after completion of taskflow in popup

    Hi, Scenario: In main page, having an emp-table and popup(which contains taskflow as region). In taskflow, iam modifying the emp-table data and after successfully completion of taskflow, want to refresh the emp-table present in the main page. How can