My ipad is disabled and i have to connect to itunes what do i do
my ipad is disabled and i have to connect to itunes what do i do
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Similar Messages
-
My iPad is disabled and it says to connect to ITunes with my Mac. It still is not working.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...
Those Links are working here...
Try this one,
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097 -
My ipad says ipad is disable and it needs to connect to iTune?
I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Message was edited by: Diavonex -
My Ipad is disabled and is telling to connect to Itunes?
I have forgotten my PassCode and my Ipad says
Ipad Is Disabled
Connect To Itunes
What do I do??
Need Help Urgently pls Help!!!!!!!!!!http://support.apple.com/kb/HT1212
You'll want to follow this article if you have a computer you sync constantly with iTunes with. If you don't then you can restore the device to factory default to reenable it. -
my ipad is disabled. What should i do?
Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
my ipad was disable because i forgot the passcode. it wanted me to connect to itunes so i plug it into my computer when it pop out it said it is connected to the camera so what do i do
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the screen pictured below,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
My ipad 2 disabled and i have a itunes passcode on it what do i do
my ipad is disabled and i when i connect to itunes it wont connect i did lock my ipad from icould but i dont know what else to do can some help me please
Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software. -
It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My ipad is locked and i have to connect it to itunes
my ipad is locked and i have to connect it to itunes but now itunes wont accept it unless i unlock the ipad but i can't, what do i do?
I have no clue what you're talking about. Perhaps you can rephrase with correct spelling and real sentences that include initial caps and periods and other grammatical niceties.
-
my kids entered the passcode several times wrong and now it is disabled and written on it"connect to itunes" , when i did connect it to itunes it said "can not connect to ipad because it is locked with a passcode" what can i do pls?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
If you do it via a different computer that it's not normally synced to then (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync because it is locked. Any way to unlock and keep data? (apps, gaming levels, music).
Hi,
Take it to you nearest Apple Store and see what they have to say. You should back up you data before you go in but in your case you can not.
xxmitchxx90 -
My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?
Then try DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My ipod says it is disabled and tells me to connect to itunes but nothing is happening how do I fix it
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my phone is on disable and ask me to connect to itunes and when i try it says i need to unlock my phone? how can i unlock it if its locked ? please help?
Connect in recovery mode according to http://support.apple.com/kb/HT1212
Maybe you are looking for
-
Can I connect every USB-Audiointerface with Logic Pro?
Hello there, please forgive me, if my english isn't so well. So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface. But - Can I simply connect a USB-Audiointerface with Logic
-
HI Can anyone tell me which report I should use to see that a particular stock has had no movement at all during the said period...... Thank You Dnt Advise me MC50
-
Repeatedly (daily)when trying to install update is not connecting to server
every time i restart my computer and connect to firefox, it "strongly recommends " that I install the latest update which I click ok to. When it tries to do it, it keeps running in the background with a screen and across the top it says connecting to
-
Can someone explain the differences between using the spot healing brush versus the healing brush? Thanks. Mary Lou
-
Today I recorded a 5 minute long video using the built in iSight camera on my Intel iMac. When I went to upload it to youtube, I was pretty sure it was gonna be less than 100 MB's...I was wrong. The size of this movie kinda scares me...a 5 minute vid