My ipad is disabled and i need serious help to get it open again.
I have an ipad 1 that I downloaded an app on and pressed a lot of buttons and then my iPad was locked. I cant unlock it so how do i reboot it when the computer i usually use with it is not currently working? I really need help!
Thx in advance,
Abigail
I don't know if you will find this helpful but you can take a look.
http://www.tech-faq.com/itunes-network-connection-timed-out.html
Make sure you have the latest version of iTunes and turn off your firewall and antivirus software and then try again to restore.
If you can connect but you are still unable to restore, you can try recovery mode.
http://support.apple.com/kb/ht4097
Similar Messages
-
My ipad is disabled and when I connect to the computer to sync it is not finding it. I don't know what I need to do to fix it so that I can sync. Please help
Restore your ipad
-
My ipad says ipad is disable and it needs to connect to iTune?
I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Message was edited by: Diavonex -
Getting attachments and emails need serious help!!
I am not sure if I am doing this right, but I am trying to receive emails from gmail, and I am having some serious problems. For some reason I get four emails and then I get a null exception. I have been through my code a dozen times and I cannot find the problem. Here is my code: try{
Properties props = new Properties();
props.setProperty("mail.pop3.socketFactory.class", SSL_FACTORY);
props.setProperty("mail.pop3.port", "995");
props.setProperty("mail.pop3.socketFactory.port", "995");
Session session = Session.getInstance(props, null);
Store store = session.getStore("pop3");
store.connect("pop.gmail.com", "jwheat3300", "carrie11");
Folder folder = store.getFolder("INBOX");
folder.open(Folder.READ_ONLY);
int n=folder.getMessageCount();
attach = new String[n];
String select = "false";
String body = "";
for(int i=1; i<=n; i++)
Message message = folder.getMessage(i);
date2 = "3/2/2006";
from = message.getFrom()[0];
subject = message.getSubject();
attach="false";
Multipart multipart = (Multipart)message.getContent();
int j = multipart.getCount();
for(int l=0; l<j; l++)
Part part = multipart.getBodyPart(l);
disposition = part.getDisposition();
System.out.println(disposition);
if((disposition !=null) && ((disposition.equalsIgnoreCase(Part.ATTACHMENT) || disposition.equalsIgnoreCase(Part.INLINE))))
MimeBodyPart mbp = (MimeBodyPart)part;
if(mbp.isMimeType("text/plain"))
body = (String)mbp.getContent();
if(body==null)
body="";
bodies.add(new Body(body));
if(mbp.isMimeType("text/html"))
body = "This is an html email. Unable to display HELP";
bodies.add(new Body(body));
if(mbp.isMimeType("application/x-shockwave-flash"))
attach[i] = "true";
System.out.println(part.getContentType());
if(disposition == null)
MimeBodyPart mbp = (MimeBodyPart)part;
if(mbp.isMimeType("text/plain"))
body = (String)mbp.getContent();
if(body==null)
body="";
bodies.add(new Body(body));
attach[i] = "false";
if(mbp.isMimeType("text/html"))
body = "This is an html email. Unable to display HELP";
bodies.add(new Body(body));
attach[i] = "false";
inmails.add(new Inmail(select, from, subject, date2, attach[i]));
table.revalidate();
folder.close(false);
store.close();
}catch(Exception t)
System.err.println("Exception900: " +t.getMessage());
I get the body fine, and what I am trying to do is when I get all of my information is to put this into the inmails vector and then update my table. That works but I am only gettting four of thirty emails. Also when it comes to attachments do I need to set up a mime type for every possible attachment that will come? I need some serious help!I guess I am seriously confused then....I tried doing the tutorial from jguru on sun's site and this was how the code was set up. At least I think it is....I pretty much have no idea what I am doing. I mean the code as it stands will get the emails, and by the way this is for an application not for a server or anything. So should I check for it to be just plain text first and then find out if there is a multipart. There is not really any good tutorials that explain what it is I am trying to accomplish. Please help!
-
My first BB 8310 and I NEED SERIOUS HELP....
Is there any BBA (BlackBerry Anonymous) meetings in my area. Had it a week and I'm addicted already. Don't know how I lived without it!! **bleep** you who ever invented it!!
vino2216 wrote:
I actually do have a quick question which probably should of included in the original post. Does anyone think there will be a software update anytime soon that stops the messages from automatically opening for us crack heads who can't wait one minute before pulling out our berries from our holsters?
See, that just flies in the face of true addiction and assimilation. You aren't addicted. Yet.
But no, I haven't heard of an anti-email opening application. Could be part of the conspiracy against us, so watch out.
Message Edited by JSanders on 01-13-2009 11:40 AM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My WiFi crashes randomly and I need to reboot to get it working again
So I got my Macbook Pro 15" late 2011 repaired two weeks ago. After that the Laptop worked okay and after a few days I upgraded to 10.9.3 (from 10.9.1) and now my WiFi crashes randomly. It just stopes working. It doesn't find the network anymore and if I try to switch it of and on again, it won't go on anymore. The only way to fix this is to reboot the whole machine. This happens pretty randomly.
Currently I don't know if the repairs (Apple switched the logic board) is the problem or if there is a bug in the Mac OS that creates this.
Has anyone else have the same issue on their Mac OS 10.9.3 ? How do I find out if this is hardware related? Rebooting helps, so for me this is not an obvious hardware failure, but what do I know
BodoIs it Wifi or USB?
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues. -
My ipad is disabled and it says i need to connect to itunes when i connect it to itunes, it says it wont recognize it until i put my passcode into my ipad, but with my ipad disabled, this is immposible, how can i resolve this problem?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad an resync your content to it
-
My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...
Those Links are working here...
Try this one,
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097 -
My ipad is disabled and says I need to connect to itunes. When I connect to itunes it says I need to enter a passcode on my ipad however there is no place to enter as passcode. The screen is locked.
You need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097 -
My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?
If you do not have the password, you can only do a restore-resetting the iPad to factory condition.
-
My iPad is disabled and I can not input my passcode. what do i need to do? I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad.
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it
-
I have activated the passcode lock on my iPad sometimes ago and now I foregot it, I entered several passcode but non was correct, now the iPad nis disabled and would not connect to the iTunes. what can be done to unlock my iPad?
If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
-
My Ipad is disabled and tells me to connect to Itunes. When I do that, I get the message to enter passcode on my IPad but I can't because it's disabled:(
In one of the options, it tells me to sync as if I have never synced to itunes but I'm afraid it will reset to factory settings and I will lose what I had on Ipad.Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
HT1212 My iPad is disabled and I can't access the iTunes to reset the password.
My iPad is locked and it need to be connected to the iTunes and also it shows me the it's disabled when iI connnect it to the iTunes so I can't reset the passcode. Is there any suggestion to fix my problem.
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My ipad is disabled and i cant connect to itunes without the passcode. how do i unlock my ipad?
My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?
http://support.apple.com/kb/HT1212
Maybe you are looking for
-
need suggestions
-
Deploying application on localhost.
Hi, Trying to deploy the first application from "Go and Create". In sapmmc I see that Message Server and Enqueue Server are running. Moreover in Window->Preference->SAP J2EE Engine on right panel, I have selected the "SAP J2EE engine is installed on
-
Configuing javax.faces.CONFIG_FILES.....
Hi all, i have the following problem. I need to put my jsf config files in a location diferent from WEB-INF. For example something like this: <context-param> <param-name>javax.faces.CONFIG_FILES</param-name> <param-value>classpath:xxx/yyy/faces-confi
-
How to manage Time Machine backups
Is there any way to manage time Machine Backups? The things I want to do are: * Selectively trim old backups for files I longer need * Delete whole backups to maintain a trimmer backup disk * Restart the whole backup process from time to time (purge
-
Approval procedure for the creation of a new item
I would like to have an approval procedure for the creation of new items. In that when one gets added, it gets placed on hold immediately and an alert gets sent to a manager. thx, Richard