My iPad is disabled and tells me to log in to iTunes to connect to iTunes when I connect to iTunes it's asking me to change the password? what do i do?
my iPad is disabled and tells me to log in to iTunes to connect to iTunes when I connect to iTunes it's asking me to change the password? what do i do?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and resync your content to it
Similar Messages
-
What could cause the lock in my preferences to seemingly to click open on there own,I use my home wifi network which is private and have never given out that password either for my network or preferences password.....help,Thank you
You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception. -
I forgot my password for my airport. i need to know how to access the system and change my password
Pay close attention to the information about a "Soft Reset" in this Apple Support Document:
http://support.apple.com/kb/HT3728?viewlocale=en_US -
My Ipad is disabled and tells me to connect to Itunes. When I do that, I get the message to enter passcode on my IPad but I can't because it's disabled:(
In one of the options, it tells me to sync as if I have never synced to itunes but I'm afraid it will reset to factory settings and I will lose what I had on Ipad.Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?
If you do not have the password, you can only do a restore-resetting the iPad to factory condition.
-
i cannot do a force reset... When i hold in the home and sleep/wake button nothing happens, I have tried these same steps over and over again. Neither the apple or the itunes logo ever pop up.. The screen just stays black. I recently replaced the digitizer after my son cracked the screen. I have made sure that nothing was injured during repair. I did put the digitizer ribbon in wrong and then the screen was not working correctly. I had put the ribbon in backwards. So after the first wrong installation of the digitizer, i tried to unlock the screen with my passcode but it obviously wasn't working.. i would touch the number for the passcode but the screen would respond somewhere else..so i kept getting the passcode wrong and then BAM! Ipad disabled.. so i took a break from the frustration... When i returned to my ipad i took it back apart and thats when i realized that i had the digitizer ribbon in backwards, so i fixed it and replaced the screen once again.. But now the ipad is disabled, and for some reason it will not respond when i try to shut it down all the way, no red slider at all...so i bout a apple data transfer cable and i tried to connect it to itunes and hold the buttons like i read to do in the article, and my computer recognizes that my ipad is there,,, it tells me that i have to allow access and to respond on my ipad.. but sadly i cannot.. nothing appears on the ipad.. it stays a black screen and then when i lt go the "ipad is disabled" screen comes on.....
Then i read online that i could restore from icloud.com, so i go there, i sign in just fine but my ipad is not listed in the devices there either... it says " No Devices, You must be signed into iOS8 settings or Mac OS Yosemite system preferences to see devices."
And i dont believe the ipad is up to date, it had been unused for about 2 months, until last week when i attempted to fix it so im sure the operating system is old :-(
So im totally lost, I dont have a clue what to do to get my device recognized. I would really appreciate any help that anyone can give,, Thank you so much in advance!!!
Ipad 2 wifi 16gbIf recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?
http://support.apple.com/kb/HT1212
-
My ipad is disabled and itunes will not recognize it
ipad is disabled and itunes tells me to enter password in ipad
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My ipad is disabled and it says i need to connect to itunes when i connect it to itunes, it says it wont recognize it until i put my passcode into my ipad, but with my ipad disabled, this is immposible, how can i resolve this problem?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad an resync your content to it
-
My ipad says ipad is disable and it needs to connect to iTune?
I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Message was edited by: Diavonex -
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Pls, help me , my ipad is disabled as a reult of constant inputing wrong security code by my child on my ipad, i was asked to connect to itunes. The ipad is disabled and cannot do anything to allow me connect to itunes. Pls, What do I do???
This should solve your issue:
http://support.apple.com/kb/HT1212 -
My ipad is disabled and when I connect to the computer to sync it is not finding it. I don't know what I need to do to fix it so that I can sync. Please help
Restore your ipad
-
My iPad is disabled and I can not input my passcode. what do i need to do? I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad.
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it
Maybe you are looking for
-
Long Text in Crystal Report for Enterprise 4.0
Hello, I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0. The Characteristic (which is hierarc
-
How do i download images from nokia 6350 w/o memory card?
I'm trying to download images taken with the Nokia 6350 camera to iPhoto using a USB cable. The phone does not have a memory card. I plug the cable in and select 'Data Storage' from the connectivity menu and then get a message ' Insert memory card to
-
Protect images / content in PDF...
Hi, How can I set up securities to protect copying of images / general content of a PDF? I went through the settings in Acrobat, but could not find what the name of this feature is. Thanks!
-
Export with expdp tables with name like 'name1%' or like 'name2%'
How can I export data and metadata only from tables with name like 'name1%' or like 'name2%' what value must have INCLUDE parameter ? from one match it is INCLUDE=TABLE:"LIKE 'REF%' " this exports tables witch name begins with REF, but I need tables
-
ARD 3.1 on a Cisco network with multiple VLANs
I really hope someone can help me with this one because it's giving me all sorts of headaches. I manage all the IT for a large elementary school. We have Macs all over the building. (unfortunately many are still OS 9 Macs) As we replace and add new m