My iPad is disabled - connect to itunes... HELP please, my iPad is disabled - connect to itunes... HELP please, my iPad is disabled - connect to itunes... HELP please
my iPad is disabled - connect to itunes... HELP please
You will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your computer's iTunes to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
Similar Messages
-
I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!
What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on. -
i have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
-
I have activated the passcode lock on my iPad sometimes ago and now I foregot it, I entered several passcode but non was correct, now the iPad nis disabled and would not connect to the iTunes. what can be done to unlock my iPad?
If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
-
After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!
You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network. -
I can't unlock my ipad 2-the screen is frozenand I can't type in my password, can't shut it off and can't connect to itunes because I need to unlock it-which I can't..PLS. help! Thanks!
Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
my ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty
Place the iPod in Recovery mode and then restore
-
hi, recently i have forgotten my passcode to my itouch and it has disabled it. if i connect my itouch to my current itunes to enable it, will my music/apps etc be deleted off my ipad? thankyou!
You need to place the iPod in Recovery mode and then connect to your computer and restore via iTunes. The iPod will be erased.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
iOS: Wrong passcode results in red disabled screen -
Hi my iPad displays "iPad disabled connect to iTunes" when I connect it to iTunes it keeps asking for me to enter password but I can't because the iPad is disabled. Can anyone please advice how to resolve this problem. Thanks
Best regards
iPad 2, iOS 6.0.1You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it
-
Every time I connect my new iPad2 too my Sony laptop a pop up comes out saying " the iPad cannot be used because it requires iTunes version 10.5 or later. Can someone please help me!.
Download and install the latest iTunes. Once you satisfy that requirement the warning will go away.
-
I am trying to restore software on my iPad which is connected to my PC with iTunes when i'm in recovery mode a warning comes up
"The iPad could not be restored an unknown error occurred (1604) This i have discovered probably a USB timing problem ?
I have followed all suggestions but still my iPad screen is locked with a iTunes logo and a USB cable beneath it, wish I had never bothered
to update it now. Any help would be appreciated. rgWhen I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
So I have a ipad min. I want to connect it to my Apple TV. There is no option on my ipad for home sharing which my Apple TV is telling me to do.
Can somebody please just explain it to me in simple terms where I can find the home sharing and what I have to do to connect my Apple TV to the ipad or vice versa.
Everything I have bought from apple in the past month has been a complete let down its taking far to long to connect things and the people who sell the products to you lie about what the product does and can do.
Can someone help me please
ThanksAirPlay isn't anything to do with homesharing. (Home sharing lets you share the iTunes libraries on computers)
Basic AirPlay: Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
Mirroring: When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device. -
Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server. Help!
Place the iPOo in recovery mode for the passcode issue. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Please help me to upgrade latest iTunes version so then I can upgrade to iOS 5 or 6. I have an iPad 2. Thank you.
You need to update iTunes on your computer (not the iPad) to the latest version in order to then update the iPad to iOS 5.1.1 (iOS 6 isn't released until the Autumn) - you can check if you are up-to-date (which will prompt you to update if you aren't) via, on a PC, 'Help > Check For Updates', and on a Mac 'iTunes > Check For Updates'
When you have that installed, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Maybe you are looking for
-
"no data found" run-time error masking SQL/report mismatch
Hi all, At last, figured out a vexing problem and wondering if anyone else either: a) has also hit the problem, and hopefully b) has figured out a clever way around it. Namely, in our AppEx apps, we rely on SQL query generation from PL/SQL packaged f
-
Bridge CC / How to use all cores to generate JPEG images?
Hi! Is there anyway to tell Bridge, that it should use all my cores to generate the JPEG images out of RAWs? Actually it uses less then 25% of my CPU performance. I've a Intel Core i7-2600 CPU @ 3,4 GHZ, with four cores and enabled hyperthreading, al
-
Having problems using forms in Adobe Reader on Surface RT
I'm trying to use fillable forms on Adobe Acrobat on a PC that can be accessed via a Surface RT at work. But when I access the forms with the Adobe Reader app and attempt to fill out and email the forms, the parts that are filled out come out blank.
-
Populating a SELECT list from an Oracle Table
Hello, I would like to populate a second SELECT list on a web page based on the selected value in the first SELECT list. I would like to take the value that the user selects in the first SELECT list and use it in a WHERE clause to bring back distinct
-
Displaying different spaces in dual monitors
Hi, all. I am using dual monitors in Mountain Lion. Can I display different spaces (desktop 1, desktop 2 or dashboard) in different monitors using mission control? Thank you.