My iPad is disabled, what do I do?

Well I got my ipad, and i forgot the passcode!
I've tried plugging it in my computer. but it says "iPad cannot connect because there needs to be a passcode, type your passcode to continue" and I dont know what to do!
I've tried all my passcodes I have thought of and had.
Do I need to take this to an apple store?
Or is there an easier way?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Similar Messages

  • My ipad is disabled what do i need to do

    my ipad is disabled what do i need to do

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • I forgot my ipad password. My Ipad is disabled what can i do

    I forgot my ipad password so my ipad is disabled what can I do to get it activated.

    Entering your Wifi password will not - unless I'm missing something completely - disable your iPad. The only thing which will disable your iPad that I'm aware of is entering your passcode for iPad incorrectly multiple times.
    If this is the case then please see: http://support.apple.com/kb/HT1212
    If you have forgotten your password for your router the WPA or WPA2 key as it's also known as they you will need to log in to your Router and setup a new WPA(2) key.
    Regards,
    Steve

  • My ipad says "ipad is disabled" what should I do?

    my ipad says "ipad is disabled" what should  I do?

    are the original owner? where did you purchase it?

  • I created a password to my iPad as a parental restriction, but my daughter played with it and pushed the wrong password 10 times my ipad was disabled, what should i do, since it wont sync with itunes becoz it will just say, cannot sync files becoz the dev

    i created a password to my iPad as a parental restriction, but my daughter played with it and pushed the wrong password 10 times my ipad was disabled, what should i do, since it wont sync with itunes becoz it will just say, cannot sync files becoz the device is password enabled, Please somebody helpme

    If you are talking about the passcode that gains access to the iPad - you will have to restore your iPad in order to unlock it. You will want to use the last computer that you synced with so that you can recover all of your app data, settings, etc. this explains how to restore the iPad. At the end of the process restore from your backup as described.
    http://support.apple.com/kb/HT1414
    If iTunes will not let you restore that way, you may need to use recovery mode to restore, and you can read about that process here.
    http://support.apple.com/kb/ht4097
    IF - you are talking about a restrictions pass code that you put on the device to restrict content or downloading apps or something like that - you do not want to restore from the backup - because that backup will contain the passcode that you cannot remember and you will end up where you started.

  • Hi..my ipad tab is showing a message "ipad is disabled" what shall i do?

    Hi..my ipad tab is showing a message "ipad is disabled" , what can be done to rectify this.

    Connect the iPad to your computer's iTunes and you should be able to use that to reset the iPad back to factory defaults, after which you can restore or resync you content to it : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled.

  • HT4623 my ipad is disabled what will I do

    my ipad is disabled what will I do?

    Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT4759 My Ipad is disabled, what i need to do, pls help

    My Ipad is disabled, pls help what to do

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • My ipad is disabled  what do i do to enable it

    hello..my ipad has been disabled, how do i get it to work?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipad is disabled, what should i do?

    My ipad is disabled and have tried to connect to itunes, i dont have the laptop i last conected to itunes with anymore.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT4623 I downloaded ios7 now my ipad is disabled, what can I do?

    I downloaded the ios7 on my ipad and now it is disabled. How can I retrieve my forgotten passcode?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot my password,my ipad was disabled,what can i do?

    my ipad was disabled

    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • My ipad was disabled, what can i do?

    my ipad 2 was disabled, how to unblock this ..

    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • HT1443 my ipad is disabled what should i do

    i need help please

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
         Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • After using Ipad in Cancun, Ipad is disabled after returningto US. Wht do I do?

    After using Ipad at resort in Cancun Ipad is disabled, What do I do?

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

Maybe you are looking for

  • Acrobat won't run: "open another product" message. Still won't run

    All, I successfully installed Acrobat as part of CS4 Web Premium on a win7 64-bit system. Every time I try to run any Acrobat function like printing to pdf, openong a pdf, for example, I get a message that Acrobat was installed as part of a suite and

  • Could not install SOA on my linux box

    Hi, I downloaded soa_linux_x86_101310_disk1.cpio from OTN (http://www.oracle.com/technology/products/ias/business_rules/index.html). unzip it, and run the install/runInstaller, but I got the following error. I also run the uname, and "cat /etc/issue"

  • How to set up fixed height in ADF layout component

    I try to create a page by having my main content at the center of page within a box using a fixed height. The idea is when the content is too long, a vertical scrollbar should show up for that box instead of stretching that box. I tried to use trh:ta

  • Credit Card Processing in FB70

    Dear Friends, How do I configure credit card details for processing through fb70 without linking SD. Thanks Sivaram Edited by: vedulasivaram on Jan 11, 2012 10:35 AM

  • Table interface

    Can anyone explain table interface concept with examples sridhar