My ipad is freezing on the apple logo!!!!!!
Hey Guys!
I turned my iPad off the other day now its freezing on the apple logo. Its still freezing now since about 6 hours, I tried to reset it (home+turn off button)...no effect and I tried to reset it with itunes but itunes isnt showing up my device. I tried to let the battery run out but its taking really long or its just not running out of battery.
I really need help.
-applepad2
My Computer: Windows 7 - Pakard Bell TK 85 - iTunes 11
My Devices: iPad Mini,iPad 1,iPad 2,iPhone 4,iPod 4
Data will be lost but you can re-download past purchase e.g. Apps and Music
Download past purchase
http://support.apple.com/kb/HT2519
Similar Messages
-
When restarting my iPad 1 freezes on the apple logo. It even does when I try and do a reset by holding power and the hold button for 10 seconds.
If the reset doesn't work, you have to force the iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Ipad 4 freezes with the apple logo on startup
if my ipad runs out of battery i plug in in when the apple logo appears for a few seconds it has some type of system code down one side.
after that it just freezes with the apple logo on it
it was working just fine, it has the latest iosUnable to Update or Restore
http://support.apple.com/kb/ht4097 -
My iPad hang/freeze with the apple logo. Hard to restore.
Hi all...
How to solve a frozen/crash iPad or restore it?
Seems like my iPad cant login into home screen (now only appears the apple logo).
When i press home+power, i connect into iTunes and detect the iPad for restore.
(in the iPad screen appears apple logo & usb cable)
And while iTunes download the firmware, disconnected while there is 55 min left.
After that, I can't connect my iPad to iTunes.... (now only appears the apple logo).
Thanks for helping.
Awi-Jakarta-IndonesiaAwi ~ This Apple doc may help:
_iPad: Unable to update or restore_
...You can find such support docs by searching here:
http://support.apple.com/kb/index?page=search -
On starting up my new iPhone 4s, it freezes on the apple logo. I have tried the reset buttons trick and have tried restoring again too but neither works. Any other ideas? Or is the phone simply corrupt in some way?
Did you try to connect in recovery mode and restore without using the latest backup?
Recovery mode and How to back up your data and set up as a new device
If setting up as new device does not work, you'll have to get it serviced or looked at by visiting an Apple Store.
Did you try to remove the ipsw firmware file and restore, to make iTunes download a new copy from Apple?
Those files are located here:
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.
Windows 7 and Vista
iPhone
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
Note: If you don't see the AppData folder, you may need to show hidden files.
Message was edited by: Ingo2711 -
I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.
Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore -
my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
iOS 7.02 update made my iPad stay frozen on the appl logo. What's more, a factory update in DFU mode won't work either, I get error code 3194 - any tips on what I should do? It is an iPad2 on iOS 5 something, the one just before Apple removed YouTube...
iOS 7.02 update made my iPad stay frozen on the appl logo. What's more, a factory update in DFU mode won't work either, I get error code 3194 - any tips on what I should do? It is an iPad2 on iOS 5 something, the one just before Apple removed YouTube...
-
It is normal, when your ipad is in recovery mode and your itunes starting downloading 1 item (ipad software update) and in few minutes my ipad screen back to the apple logo?? It is ok ?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using one of these programs to place the iPod in recovery mode
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
My iphone 4 is freezing with the apple logo.
Hi, My iphone 4 4.3.5 is freezing with the apple logo. I tried restoring but gives me an error. The activity signal stops spinning and I can't turn off
the phone.Oops I mean I don't have a computer*
-
I tried to restart my ipad. Instead of the apple logo coming up, the wheel has circled for hours. I don't know what to do about this. Can anyone help? Thankis.
Hard Reset.
- Hold down the Home Button (Circle button with White Square in it)
- Wait for the 'Slide to Unlock' screen pops up
- Test to see if the issue is resolved. -
My iPad is stuck with the apple logo!!! Please help me
My iPad is stuck with the apple logo. it just shut off, and I turned it on, and the apple logo won't go away. sometimes the screen goes black, and then the apple logo shows back up. Help!!!!!!
Have you tried rebooting your iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that does not work, you can try restoring your iPad iOS Software.
iTunes: Restoring iOS software - Support - Apple
Make sure that you read the article all the way through and pay attention to the last part that talks about using recovery mode. -
My ipod is allways freezing at the apple logo when i start up my ipod 2nd gen
my ipod is allways freezing at the apple logo when i start up my ipod 2nd gen oh plz help meeee
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
What to do if your iphone 3GS freezes on the apple logo and wont respond when you try to reboot it?
My iPhone 3GS keeps freezing as soon as i turn it on. I hold the home button and the power button to reboot it and it just wont respond to anything. It just stays froze on the apple logo with the black background and nothing else.
Hi hollie13,
I'm sorry to hear you are having issues with your iPhone not responding.
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Always back up your device before troubleshooting:
iOS: How to back up and restore your content
I've quoted some helpful highlights for you:
iPhone, iPad or iPod touch: Not responding or does not turn on
Resolution
Follow the appropriate steps for the symptom you're experiencing.
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds. If there is no video, verify that the device has enough charge to turn on
Ensure the iPhone is connected to the Power Adapter it came with.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode.
I hope this information helps ....
Have a great day!
- Judy
Maybe you are looking for
-
Acrobat 8.1.2 Pdf Files disappear
hi there, i am running OS 10.5.2, Adobe acrobat pro 8.1.2 . when i print a file from vectorworks (12.5.3) about 40% of all files go to the printer dialogue, where it says printing, processing and so on and then disappear completely. if i am lucky the
-
How do i run two queries in one worksheet?
Hi I am new to Disco and am finding some things easy to fathom and others not so. I have a table with fields callref logdate closedate I want to be able count the number of calls logged each month/year and the number of calls closed. So, I want to do
-
I cant get QT to not use IE...help?
i cant get QT to not use IE...help?
-
UCCX 8 agent Email stuck in outbox
Hi, I have UCCX 8 version 8.0.2.1100 new installation. The UCCX 8 can't send emails trough Exchange 2007. When you login to windows PC with the same credentials used by UCCX and open outlook you can see all messages stuck in the outbox. This happen
-
For some reason, don't know why, I'm running my ANT script and below is the message I get. When I try to view the URL at: http://localhost:8080/OnlineRegistration/ I get the unpleasant message: HTTP Status 404 - /OnlineRegistration/ type Status repor