My iPad is frozen and I can't reset it when I try to hold the power button bown. How can I get it unfrozen?
My iPad is frozen with the message that I need more storage from I cloud and I can't reset it. What can I do to get it reset so I can use it?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Similar Messages
-
I just installed iOS5 on my Ipod Touch and there is a gray bubble when I try to choose an album or song, how do I get by this to make my choice or how do I use the bubble?
Thanks, Stedman, that is helpful (I seem to be able to get past the "bubble" somewhat) but it is still there....I have, in the past, stroked across the music of choice and that was it...now the "bubble" with the choice name comes up and if I go all the way across I get a delete choice? Can you help with this also or where would I go to research changes (I see there are 200!!!) in this upgrade?
-
I cannot acces my Ipad. After I enter my passcode, I am locked out. I did install OS 7 today.
To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates -
HT1212 My iPad is frozen and I can't do anything.
My iPad is frozen and I can't do anything. It's stuck on an internet screen. I can't turn it off. When I plug it in it says it is NOT charging. Can anyone help?
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.
You need to restore the iPad.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that will not work, you will need to use Recovery Mode to restore.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My I phone is frozen and I can't get it to work. I have tried to restore it several times and nothing happens. All it does is show the iTunes logo with the plug and arrow. Is there anything I can do to get it to work I am in sales and need my phone. The closest Apple store is 45 minutes away
and I have appointments all day tomorrow.
Thanks in advance.
MaryTry to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
My bejeweled game is frozen and I can't get it unstuck
My game bejeweled is frozen and I can't get it unstuck. Help.
Hi pam5551,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Cheers,
- Judy -
Photoshop Elements 3 dialog box with picture and patent numbers - not sure how to get it fixed. It's in an infinite loop - have rebooted to no avail. Should I update to a higher version after deleting this version?
Tried the resetting options, but can't even get to preferences - nothing
will open. May have to find my Version 3 CD, or delete Photoshop 3 and get
a higher version.
In a message dated 1/4/2015 11:35:36 P.M. Eastern Standard Time,
[email protected] writes:
Photoshop Elements diagog box is frozen and I can't get it to close. Do I
delete and up date to a high version? I've been getting along fine until
yesterday - not sure what happened
created by RKelly_ (https://forums.adobe.com/people/R_Kelly) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/7065312#7065312) -
HT4539 my ipad is disabled and I can not get it to open my main screen
my ipad id disabled and I can not get it to open my main screen, how can i regain access to the product
If it's showing the red disabled screen then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
my ipod wont turn on, its a ipod 5th gen- I turned off my ipod and then when I went to check it later it wont turn on this is the second time it happened, I tried to charge it its not recognizing it, I have heard that you can try to press the power button and the homebutton to make it work, when it happened the first time I did that and it worked but since my home button isn't working what can I do, can I try to fix it or do I have to go to apple and ask, can anyone help me plz
Hello, pravin729.
Thank you for visiting Apple Support Communities.
I understand that your iPod touch will not turn on. I would start with going through the troubleshooting steps in the article below.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
http://support.apple.com/en-us/HT201412
Cheers,
Jason H. -
I have no external devices connected to my Mac mini but still everytime I use it after about half hour to an hour in whatever I'm using wether it's the Internet or iPhoto or iTunes the beach ball appears and I cannot get it to stop I always have to press and hold the power button and force it to switch off I then do a safe reboot and it starts up again fine but same thing again after a certain amount of time it will freeze. I have also had on some occasions a bright white screen with a folder and a flashing question mark appear but it's not because of any external devices as they have all been removed please can someone help me as I have no idea why this keeps happening to my computer and I'm worried that there's something seriously wrong it's only about 6 months old and I have no experience in dealing with computers ??
EtreCheck version: 2.1.8 (121)
Report generated 13 February 2015 15:33:46 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
LG TV spdisplays_1080p
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:11:35
Disk Information: ℹ️
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (398.54 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/AVG AntiVirus.app
[loaded] com.avg.Antivirus.OnAccess.kext (2015.0 - SDK 10.8) [Click for support]
Launch Agents: ℹ️
[running] com.avg.Antivirus.gui.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.avg.Antivirus.infosd.plist [Click for support]
[running] com.avg.Antivirus.services.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
5% WindowServer
1% AVG
0% AppleSpell
0% fontd
0% cloudpaird
Top Processes by Memory: ℹ️
215 MB com.apple.WebKit.WebContent
125 MB avgd
107 MB Safari
90 MB Messages
69 MB WindowServer
Virtual Memory Information: ℹ️
171 MB Free RAM
1.68 GB Active RAM
1.53 GB Inactive RAM
637 MB Wired RAM
1.34 GB Page-ins
2 MB Page-outs
Diagnostics Information: ℹ️
Feb 13, 2015, 03:20:28 PM Self test - passed
Feb 6, 2015, 08:08:07 PM /Library/Logs/DiagnosticReports/Kernel_2015-02-06-200807_[redacted].panic [Click for details] -
I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?
P.S running software version 4.3.3I have the same problem on an original iPad.
-
I installed ios7 on my iPad 2 yesterday, this morning it wouldn't open the weather channel app. I thought maybe I should power it down. When I held down on the power button the screen went black and now it won't do anything. What do I do now?
Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
-
purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death" any suggestions?
My machine was patched to date 10.x.x. I was lucky to get an internet connection and I selected the option to re-download Lion... its curruently being downloaded. What if that doesn't work?
Any thougths would be appreciated.
JoeAnd you have a workstation? not a notebook.
Usually a driver or hardware, nothing that Disk utility will fix.
You know of course what a Prohititory Sign is?
prohibitory sign, kernel panic
Forum devoted to Lion:
Mac OS X v10.7 Lion Communities
Tips and FAQs
FAQ kernelpanic
Resolving Kernel Panics
Avoiding eliminating Kernel panics
Lion App Compatibility Table - RoaringApps
RoaringApps Mac OS X Lion Application Compatibility
did you make sure your apps, drivers, and hardware support Lion? -
my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?
Try the remaining items in the white-screen topic of.
iPod touch: Hardware troubleshooting
If not successful. let the battery fully drain and then charfe for an hour and try again.
Frequently a white scree nis due to a hardware problem.
Maybe you are looking for
-
Error message when attempting to connect to itunes store
When I try to go to the itunes store I receive an error message that says "the network connection was reset. Make sure your network connection is active and try again". I can connect to everything but itunes store. I have contacted itunes support and
-
Validity End Date for A012 relation not updated
Hi All, I am working on SRM5.0 and the HR org structure is replicated from ECC to SRM via idocs. Now, for one particular user, who holds position in 2 org units, the HRP1001 table data is incorrect. For one of the relations A012 between S-O, the end
-
Hi All, It has been observed that the Catalog Data object sometimes goes for a toss and doesnt fetch any data anymore. In that case, we used to simply logout and login again. But now we have moved to IConnector Services and can't logout and login aga
-
Error: ELM does not work from UI
Hello guru´s, hard to explain this briefly, but here it goes. We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works.
-
Possible to create a new MainStage empty channel strip? (sans Rhodes!)
Is there any way to create a blank new software inst channel strip; i.e. without the EVP88+fx default setting? As it stands I have to use the "Reset Channel Strip" command everytime... totally annoying, especially since creating new channels and rese