My iPad is getting iMessages from a past user and won't let me add my phone number. Help!

Hello,
I recently was gifted an iPad 3 from my boyfriend to use as I please, since he got a new one.  I also recently got an iPhone 5.  He had the ipad set up to his phone number, and when I logged his apple ID out of setting>apples&itunes and put mine in, and also went to settings>messages>and added my apple account info, it only gives me a check mark for my email, and not one for my phone number.
When it was logged into his account, he had a checkmar I next to his email and his phone number, so he would receive all his iMessages through his ipad. I don't see anywhere to add a phone number.  Anyone have any ideas why this isn't working?
I hope that made sense.
Thank you!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

Similar Messages

  • I have an iPhone 5 and updated it to iOS7 but now I can't use iMessage or FaceTime as it says "waiting for activation" and won't let me use my phone number to do iMessage or FaceTime either

    I have an iPhone 5 and updated it to iOS7 last night but now I can't use iMessage or FaceTime as it says "waiting for activation" As well as that, it won't let me use my phone number to do iMessage or FaceTime it will only let me use my apple ID which I don't want to do.

    Thank you for replying.    Yes I deleted the old email address..   

  • Why won't my iMessage let my add my phone number?

    I am new to iPhone and can't get my IMessage to use my phone number as a receive at point. All the how to's I've read about it says you can. Someone please help.

    Ok. I have iMessage working as an email based messaging system.  Unfortunately it wont let me add my phone number as a "receive at" location.  My phone number is on my phone under the general-phone-my number, and it is also listed in my contacts and set as settings-mail,contacts,calenders-my info. Please give any advise on how to either fix this problem or reset only iMessage so I can start over.

  • My Imessage is showing my email instead of my phone number. My phone number is an option to choose from on the settings but will not let me choose the phone number, only the email

    My Imessage only is giving me the option to use my email address and will not let me select my phone number

    if this is happening apple is trying to help you not exceedd your data limit. That only works is if the person you are trying to contact has imessage.

  • IMessage will not activate and it wont let me use my phone number either, messages are sent from email

    Trying to activate iMessage and it says "waiting for activation" for ages and then it wont activate, even after three hours. It also wont choose my phone number to send messages from, it uses my email address instead. PLease help

    Is your phone number checked even though it is grayed out? It is chosen by default and even though grayed out should be checked automatically. I had the same issue with people getting my messages from my icloud email which I never use and my messages would start new threads because of it and some people did not recognize my email. Well, one thing that helped me was to go in and make sure that the email you use for your Apple ID is listed as "Home" in your contacts on each of your devices. I'm not sure if that is working with everyone I am messaging yet, but it solved some of them.
    Also for me, I am not getting iMessages on my ipad or MBP with Mtn Lion. I have not solved this yet. Anybody out there had this issue yet?

  • ICal keeps sending alarms for past events and won't let me delete items from calendar, I hit delete but the event just keeps multiplying on my calendar?

    iCal just started repeatedly sending me alarms a couple of days ago. I thought deleting the event from my calendar would help but it won't let me delete them, they just keep multiplying in my calendar. Help please

    Hello again,
    Well I seem to have overcome the problem, but not easily, and not by identifying the cause. I don't like that I don't know what caused the trouble. I make no guarantees, but this is what I did (on an iMac with Snow Leopard 10.6.8). Be sure to create backup copies of your files first:
    [Note: before you do any of this, you may want to try running Disk Utility program (found in Applications/Utilities/) and run the "Repair Permissions" option. See if that solves anything, but it didn't for me]
    a) I exported my iCal as an archive: Menu item, "File/Export/iCal Archive...". This won't likely do you any good, though, as something was wrong with it and I could not re-import it. But try anyhow.
    b) After backing them up, I deleted the folders and contents inside the Calendars folder: "Users/<your user name>/Library/Calendars/<subdirectories>". To create a backup, right-click on the Calendar folder and choose "compress Calendars" from the pop-up menu. Then drag the folder contents into the trash.
    c) After creating backup copies, delete (drag into the trash) these preferences files found in "Users/<your username>/Library/Preferences" (the slashes delimit the folder names):
      Users/<your username>/Library/Preferences/com.apple.iCal.plist
      Users/<your username>/Library/Preferences/com.apple.iCal.helper.plist
      Users/<your username>/Library/Preferences/ByHost/com.apple.iCal.helper.<some convoluted hex number>.plist
    d) Restart your computer;
    e) Launch iCal and reimport the individual calendar files you exported earlier.
    Hopefully all is well.
    Let me emphasize again that you will not likely succeed in reimporting the calendar archive. In the first place it likely contains corrupted data that caused your trouble in the first place. So you will need to import the individual calendars that have been exported. Be very certain to export these individually first.
    And if you want to make doubly certain, then copy and paste some of your important and key events into a TextEdit file and save that file in case you don't succeed.
    Perhaps you subscribed to some online calendar? If I recall correctly I had imported a calendar when the World Cup Soccer series was happening; I speculate that might have contributed to the issue. I wish I could have found exactly what caused the trouble. It may have been some older, less compatible format that was retained through a series of Mac OS updates.
    Good luck.

  • IMessage won't let me connect through phone number any more?!

    I used to be able to talk through iMessage using my mobile number, now the option is just grey and I cannot click it - only my email address which is really frustrating!
    How do I get use of my phone number back to the service?!

    I don't know if you're talking about sending, receiving, or both.
    Anyway, in Settings > Phone, is your phone number set correctly?  Does it have the international dialing prefix set correctly ("+1" in U.S.)?

  • IOS 7 update won't let me use my phone number for iMessage

    I just updated my software to ios7. I have the iPhone 4s. However after I downloaded it, I realized that iMessage won't allow me to use my phone number, I went to settings &amp; my phone number is listed as an option but it won't let me click on it, so when I try to send messages they are being sent from my email.

    http://theunlockr.com/2013/07/12/how-to-stop-your-email-from-showing-up-in-imess age-video/

  • I have an iMessage account(my email) but I want to use my phone number as my iMessage however it won't let me activate my phone number

    Any help?

    Hello Lottiehopwood
    Check out the article below to link your phone number to use with iMessage. If it is not showing up, try signing out and then signing back in to setup the link again.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    -Norm G.

  • IMessage and FaceTime not letting me use my phone number

    I restarted my phone then when I turned it back on I saw my iMessage or FaceTime wasn't logged in so I logged it in. The phone number was grey with a tack same with the email but I untacked the email. Now nothing is tacked and I can only use my email for both FaceTime and iMessage which I don't want to use. Also it says "Waiting for activation..." Does anyone know how to fix this?  I've tried shutting my iMessage off then turning my phone off for 30 second then turning them both back on it didn't help.

    The following has some troubleshooting, including a section specifically about the "Waiting for Activation" message that may help: http://support.apple.com/kb/TS4268

  • My iMessage won't let me select my phone number for 2 days now, i have tried everything. My phone number is a grey colour and I can't get a tick to appear beside it. I have signed in and out,turned on and off!HELP please!

     

    As far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
    That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
    Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
    https://discussions.apple.com/thread/3305461

  • New iPad Air has old software 7.0.4 and won't let me back up from icloud updated in 7.1.1

    How can I update the iPad Air to 7.1.1 ?
    I can't get into settings without completing set up.

    Use iTunes on a PC /Mac
    you should get the option to update to latest software as part of the Activation process
    Don't try to use back up update initially as new then use back up
    and see setting up a new device on this doc
    http://support.apple.com/kb/HT2109

  • I restored my iPhone 4s and backed it up from my computer but now all it says "Connect to iTunes" and won't let me into my phone.

    I just restored my iPhone 4s and backed up my information from my computer. It is making me set it up from the beginning every time and I can't get into my phone even though all my information is on the phone. What am I doing wrong?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • HT204053 Since upgrade to the latest version of the iPad system, my iPad does not recognise the password for iCloud and won't let me access it to change it

    Since the last upgrade on the iPad system, I have not been able to log in with my password to iCloud.  I have changed my Apple ID and password to see if this would help but no it hasn't made any difference and every time I go into my emails the log in screen keeps popping up with the old username and the sign in it won't recognise.  Please could someone tell me in easy steps how to alter this?

    Hi Susie. If you don't remember the password to the apple id with which you have logged into icloud then you need to reset the password at iforgot.apple.com. Put in that old apple id and if you have access to that email you can have a link sent to it to reset your password. If you don't have access to it then you can choose to answer security questions. If you can't answer the security questions properly then you need to go to expresslane.apple.com and tollow the prompts for apple id issues/can't answer security questions and if you put in your contact information Apple will call you immediately and you can talk to someone who can help you reset that password.

  • I am setting up ipad for 1st time but it won't let me add my router number

    I am trying to set up my ipad WiFi it brings up the ip addrees, the sunet mask but nit my rou ter info and I can't manually enter it.

    Do you need to enter it? Most Wifi networks will auto-configure simply by tapping its name in Settings > WiFi.
    More information is available here.
    Message was edited by: Alfred DeRose

Maybe you are looking for

  • Can't connect PHP/MySQL 404 error

    Wow, the learning curve is killing me. Yet another challenge. I'm using Dreamweaver CC and this tutorial http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html I'm at this step: Open comments.php. You must have a PHP page open in the Documen

  • Issue with P table and X Table of master data ZGN_PROD

    Hi Experts, I am facing issue when I carried out existence of values for navigation attributes in characteristic ZGN_PROD in RSRV. Its showing "Characteristic ZGN_PROD : 74 data records were incorrect" Please tell me how to correct the error without

  • ABAP routine - looping a result set from table.

    I am trying to access a table and pass the resulting rows to an internal table. However, before passing, I need to do some data manipulation on one of the columns of the table and then pass it. If I didn't have to do this, I could have just said INTO

  • CUCM and Jabber guest configuration

    Hi Everybody , I would like to ask the cucm and jabber guest how configuration, I can't find the document to cisco.

  • MacBook pro won't start up past grey screen

    Ive tried a PRAM reset four or five times- nothing. Won't boot into safe moDe. Tried the command line with fsck-fy and it says there is no problems with my had drive but still won't load up. it shows the grey screen with a clear spinning cog, then a