My ipad is not charging with 10W usb power adaptor ? what are the causes?

My Ipad is not charging with the 10 W USB Power Adaptor Charger ? Please tell me .....What can be the issues with solutions to resolve them ? Even when the USB is connected to computer it is not charging , however , the transfer of data is taking place including Sync. Is there a problem with the charger or the ipad please isolate & inform. Thanks.

1. Clean docking port with clean paint brush
2. Try another cable
3. Try another charger

Similar Messages

Not happy with Reboot to Restore Rx, what are the options?

noahjones2 wrote:My friend suggested that I go with RRRx for my new lab of 27 Windows computers. I went ahead with his recommendation as he was using it personally, without doing much research.As soon as the software was deployed I was bombarded with a lot of issues. These are some of the issues I faced with Reboot to Restore Rx:1. Slowed down the computers, don't know why.2. One of the computer was infected with a virus and I tried returning to the baseline to restore but that too was affected.3. Since it is not password protected, some blokes keep messing around with the baseline image.4. At every restart an error msg pops up saying 'fail to resume from hibernation... blah blah blah.'Can anyone suggest some suitable replacements for it? Thanks.
I'm confused. Reboot Restore Rx does not require you to 'return to baseline' at all. At...

My friend suggested that I go with RRRx for my new lab of 27 Windows computers. I went ahead with his recommendation as he was using it personally, without doing much research.
As soon as the software was deployed I was bombarded with a lot of issues. These are some of the issues I faced with Reboot to Restore Rx:
1. Slowed down the computers, don't know why.
2. One of the computer was infected with a virus and I tried returning to the baseline to restore but that too was affected.
3. Since it is not password protected, some blokes keep messing around with the baseline image.
4. At every restart an error msg pops up saying 'fail to resume from hibernation... blah blah blah.'
Can anyone suggest some suitable replacements for it? Thanks.
This topic first appeared in the Spiceworks Community

Ipad 4 not charging with the ORIGINAL Power adapter that came in the box. Can't charge my iPad. I plugged in on PC all night and has been charged to 7%

Yesterday, as usual was going to charge my iPad, it was at 1%. Well, I took my ipad charger (original Apple official, I want to clarify that as a first step, I'm using the brand products than Apple) and plugged into an outlet ... The ipad began loading the first two minutes , then I got a notification telling me that the iPad could not charge with the charger.
I was quite surprised by the announcement. I disconnected and reconnected it .... again, I received the same notification. Then I disconnected and tried it on another outlet ... anything, yet. then I tried it on another outlet and ipad started charging. but after a while I had the same notice, not paying attention to that. I left it charging and I removed roughly 25% that of fear for something to happen. also remembered that situation (made 2-3 months ago where the iPad was not charging but after waiting a while disconnected, reconnected it and loaded normally).
so I decided to wait to re-connect the iPad to the outlet. This time, I plugged it into the outlet (fully discharged) at night and expected to find it loaded in the morning. But my surprise is that it still is off, it did not load anything.
I Bought the iPad in December 2012. Do you think that my iPad is hurt?
What can I do? Ay recommendation?
Please, HELP ME!

Try giving your iPad a reset. Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again. You may also want to swap out the cable, just to confirm or rule out that it's bad.
If none of those fixes work, make the appointment at your apple store and have them check it out.

HT1386 My iPad will not sync with my Mac. It has in the past. I get a message that the sync failed.

My iPad will not sync with my Mac. It has in the past. I get a message that the sync failed. How do I fix it. Also, is ther a virus scan for iPads?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

I'd to lengthen my USB cable with Cat5e or Cat6. What are the restrictions?

I'd to lengthen my USB cable with Cat5e or Cat6. What are the restrictions? My iPad will live in my office upstairs and my computer is in a rack down stairs (about 50 feet away). Will the iPad and computer connect at this distance? If I use a powered balun will it help?

USB has a maximum limit of about 5 meters. To go longer than that, you will need multiple intervening self-powered hubs, though that can be problematical. Using the simple Cat-5/6 "baluns" may not work because they can cause signal timing problems. There are some USB extender products that can successfully use Cat-5 cabling over significant distances, but they're not cheap.
Regards.

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

My ipad will not charge with adapter

My iPad2 suddenly stopped charging with the AC adapters (all 3 that I have). It will charge with the computer USB port, very slowly.

Does the iPad charger charge the iPhone?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

My iPad will not charge with the charger or plugged into my laptop

I Have an iPad Air that will not charge with the charger plugged into a socket or the MacBook?

Hi Joanefrommaldon,
If the battery on your iPad is not charging, then I'd like you to please follow the steps in the article below.
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Conflict with 4.6 & 4.7 - what are the corresponding flag s.

My z_xxxxxxx program is using the flags declared in the std. program RSSTATPD ...
However the program RSSTATPD in 4.6 c contains stapar internal table which is declared with individual fields
where as in 4.7 E, the code of stapar internal table is commented & the stapar internal table declared using SAPWLPARAM structure.
so
In 4.6C in our z_xxxxxxx program, we coded as
STAPAR-ACCOUNTLEVEL   = ' '.
STAPAR-COLLECTIVEFLAG = 'X'. and is working correctly ...:-)
Where as we need same functionality in 4.7 E also.
THE PROBLEM is
What are the corresponding flags for
STAPAR-ACCOUNTLEVEL & STAPAR-COLLECTIVEFLAG in 4.7E ? ( did we chosen/coded correctly )
In 4.7 Have coded in z_xxxxxxx program like below
<b>   STAPAR-ACCOUNTlvl   = ' '.           "4.7 change
   STAPAR-COLLECTfLG = 'X'.             "4.7 change </b>
STAPAR-ACCOUNTlvl & STAPAR-COLLECTfLG are the correspoding flags, which are existing in SAPWLPARAM structure ???
Could any one say me ?
we assumed
STAPAR-ACCOUNTlvl & STAPAR-COLLECTfLG
are the corresponding flags of STAPAR-ACCOUNTLEVEL & STAPAR-COLLECTIVEFLAG
and coded in z_xxxxxxx program of 4.7 as.
   STAPAR-ACCOUNTlvl   = ' '.           "4.7 change
   STAPAR-COLLECTfLG = 'X'.             "4.7 change
However program is not working in 4.7 as it was working in 4.6C.
Is the problem with flags STAPAR-ACCOUNTlvl & STAPAR-COLLECTfLG ?
or some thing else we need to do ?

What are the corresponding flags for
STAPAR-ACCOUNTLEVEL & STAPAR-COLLECTIVEFLAG of 4.6 in 4.7E ?

HT3546 my airport will not power on, what are the possible causes?

My Airport just shut off and it will not power on. I unplug it from the wall and pulg it back into the power outlet but it still won't power on. What are the possible causes. Is this system just died out, I have it for about 3 years.

Causes....a failed electical power supply component or an internal connection that has come loose.
It's a real longshot, but if you are handy with small tools, carefully saw open the case of the Express along the center seam to open up the case and look for something obvious.
Your chances of success here are very very small, but if you have the time and inclination, it won't hurt to try.

IPad 3 slow charging with 10W charger?

Got my new iPad yeserday. Compared with my iPad 1 the charging via the 10W charger is really slow. Went to bed with power at 20%, and over 6 hours it only reached 85% charge. Normal? Others seeing the same thing? I suppose the battery capacity increase would be expected to require a longer charge...but really this slow?

Dear David,
Was your iPad sleeping while it was on the charger or was it active?
I ran some power tests yesterday. It's important to remember that not only does the new iPad have a battery that is 70% or so larger, it draws substantially more power when running (the reason for the new battery).
Testing with two different Apple AC chargers that I have, it looks like the total charge time for a sleeping iPad should be in the 5-6 hour range (that's going from approximately 0 to 100%). But… trying to charge a wakeful iPad takes more than twice as long as that. Most of the wattage being put out by the charger is going to run the iPad, not to recharging the battery.
You'll see similar effects if you're using the new iPad plugged into a USB port. My iPad2 would hold just about steady plugged into a standard powered USB hub, it would drop maybe 1-2% an hour. The new iPad drops more than 5% an hour. 5 W just isn't enough to sustain it.
Note that these results for wakeful iPads are going to depend very much on the brightness setting for the screen and the processor load. There's no way I'm going to tear my iPad apart and run proper tests on it, but it wouldn't surprise me if at the extremes power consumption ranges from under 5 W to over 10 W.
Not being willing to dig into my precious toy, I have no idea if the internal circuitry can stand much more than 10 W of charging power. If it can, I wouldn't be surprised to see a “fast” 15-20 W charger become available. There are some users who will be vexed by the substantially longer charging time. With the older iPads, you could pop it on the charger over breakfast or lunch and get enough juice to run for the next half day or over dinner to carry you through the evening. That's not going to be the case with the new iPad.
Absent such a “fix” we're just going to have to make some mental adjustments and consider this the price we're paying for a whole slew of major improvements.
pax \ Ctein
[ Please excuse any word-salad. MacSpeech in training! ]
======================================
PS: note to hosts––sorry about the URLs in my sigs in my previous posts. It's just embedded in the macro boilerplate and I don't notice it. I'll try to remember to edit them out by hand. Sorry for putting you guys to the inconvenience.

I have had my ipad for 6 months. We had a power failure and ever since my ipad will not charge with the wall adapter that came with it. It will SLOWLY charge when plugged into computer port. Can anyone help me resolve this?

I have had my iPad for 6 months. We recently had a power outage and my iPad was plugged in with the adapter that came with it. Since then I can not charge iPad with adapter, however I can charge it SLOWLY on my computer. Do you think the adapter got fried? Also do you HAVE to have iTunes with an iPad, they were charging me alot of fees for games I did not download NOR give my password to have them downloaded so I cancelled iTunes because fo too many fees. Could this have anyting to do with the battery not charging?

Since then I can not charge iPad with adapter, however I can charge it SLOWLY on my computer.
Well, something's definitely wrong if it won't charge from a wall outlet. Make an appointment at a Genius Bar or take it to an Apple certified repair provider.
As for iTunes charges, according to Apple iTunes Store: All Sales Are Final
You can try contacting iTunes Billing:
http://www.apple.com/support/itunes/
Click: iTunes Store Account & Billing / Billing Inquiries / Email Us

My "notes" on iPad will not sync with iPhone thru iCloud. What gives?

My "notes" on iphone and iPad will not sync thru iCloud. I am sure it is user error...but I can not figure it out.

It reads like this is a problem on the iOS side. On your iPhone or iPad launch the notes app, in the top left corner tap the button until you are on the Accounts page and see if iCloud is an option. If it is select that option and new notes will push to your Mac. If its not close the Notes app and go to Settings > iCloud > Notes > Toggle On. The option will now be in the notes app as described above. Side note: You may be asked to set up an iCloud email if you haven't already. Hope that helps.

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

HT1386 My Ipad will not sync with my pc. I dont get the summarry tab or devices come up in the panel. The sync cabel is working as I doulbe checked with my ipod. Any ideas what the settings should be on my ipad to sync. The ipad is currently empty . no mu

See above

It sounds like you need the driver for your Ipad to be installed. If you're using a hub or extender, stop and plug it directly into the box. Try a different USB port. If you haven't already, update your iTunes to the latest version.
Worst case, uninstall and reinstall iTunes

My ipad is not charging with 10W usb power adaptor ? what are the causes?

Similar Messages

Maybe you are looking for