My iPad is requesting activation after almost 1 year of usage

I was enroled as iOS developer and downloaded the iOS 6 Beta 3, everything was working just fine, when the final release came out I tried to buy the full release but iTunes reported I was on the last version, so no update was possible.
Last night, when surfing the web with the iPad2, a message came out saying activation was needed but no activation was possible because an error message keep saying that there are no activation servers available.
I tried a restore from a previous backup but the result is the same.
I tried downloading the ipsw of iOS6 from the apple developer website but iTunes reports the firmware is not compatible with the hardware (It's an iPad2 16Gb wifi) and I tried both ipsw available.
Please help me beacuse my precious iPad2 has rendered unusable.
Thanks in advance

I tried that trought Xcode but no changes, actual build is 10A403 and no fresher version is available, I'm starting to think that I can give away my iPad to my daughters for them to play with it as if it was a mirror for their dolls.

Similar Messages

  • HT2188 iPad 1 requested activation after being low on power. Activation does not work.

    Hi
    My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes.  this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
    I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
    Thanks

    I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
    I plugged in the USB monitor and boom - I could log in.
    Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
    So the issue is the detection / setup of monitors in/out of the dock.
    I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

  • Can we buy warranty for ipad and macbook air after 3 years from any external agencies

    Can we buy warranty for ipad and macbook pro after 3 years from any external agencies?

    I'm sure you can, however I am not aware of any companies.  Consider addining them to your homeowners/renters insurance if possible.

  • What happens after a year's usage? Will I not be able to access the application anymore?

    What happens after a year's usage? Will I not be able to access the application anymore?

    You can still purchase CS6 products for the time being:
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  • ML Activation after two years of implementation of other modules..

    Hi,
    After two years of implementation of all modules, we are planning to activate the ML. Can you suggest what sort of problems we can face during ML Activation..
    Regards

    Connection timed out to what?  Everything?  If so, then before wiping your disk, reinstalling, further deleting your keychain entries or other related activities, please check with your ISP and see if there's a network outage, or if you've exceeded some download quota.

  • Outlook 2013 downloaded from 1 and 1 as part of an Exchange subscription requests activation after one month.

    I have the following problem with 1&1: I had the Office 2010 pack with Outlook 2010 . When I subscribed to  hosted Exchange with 1 and 1 and downloaded Outlook 2013 (32 bits since 64 bits is not compatible with Office 2010) it worked perfectly
    well and replaced 2010.
    Now a little bit less than one month after it asks me the activation.
    1&1 support doesn't understand yet. They asked me to download again but it did not solve the issue.
    Any idea 

    Hi,
    Based on your description, you are not using Office downloaded from Microsoft? Could you please let me know from which site you downloaded Office?
    I only suggest you download Microsoft Products from the official site. I don't recommend you use our products provided by any 3rd-parties.
    Consider to purchase our products from Microsoft Store:
    http://www.microsoftstore.com
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • If you buy an ipad mini with cellular - after 2 year contract ends...

    can i still use the ipad as a wifi only?  or do you HAVE to have cell service?

    but what if I don't do even the month to month - even though the ipad is the wifi + cellular, can you still just use it as wifi only?  (Hope this makes sense)

  • Satellite L850 - after 1 year of usage battery runs out quickly

    Hi, through programs such as care or BatteryBar battery battery I see a Toshiba Satellite L850 *battery wear from 48%* currently. I notice that playing a game the battery runs out quickly, as the warm up by a lot, and often descalibra and behaves erratically.
    The laptop is a year old. Is it normal for the battery to wear so much in so little time?
    Would you accept a guarantee or battery replacement can claim wear caused by misuse?
    http://img690.imageshack.us/img690/6976/4f7k.jpg

    First of all you have to know that battery working time depends on the notebook usage.
    Running heavy performance applications like a game would discharge the battery much quickly. Why? Because parts like GPU and CPU and cooling modules run at highest performance and this needs power.
    Also using the notebook with highest display brightness would discharge the battery faster.
    You should also know that every battery would start to loose own performance after about 500 charging cycles. This is nothing unusual and will happen to all batteries.
    To avoid or to slow down this process, its recommended to calibrate the battery from time to time.
    Calibrating means charging and discharging the battery fully.
    Charge the battery until it would be fully charged, then disconnect the AC adaptor and keep the battery discharging until its fully empty. Repeat this procedure 2-3 times in the row.

  • HT201412 My Ipad quit working - it's 2 years old.  I called Apple and they basically told me that it's done.  I can pay 249.00 to get a reburbished Ipad 1, or buy a new one.  I want to know why it died?  They mentione it could be the hard drive.

    My Ipad 1 quit working after 2 years.  Was never dropped, abused, etc.  Just quit the other night.  Went to the Apple store, called the support line and they tell me that since the warranty is up I can pay 249.00 for a refurbished Ipad or buy a new one.  Not happy at all.  I want to know why it quit.  The person I talked to at Support says he doesn't know what happened.  He says it sounds like my hard drive crashed.  ANyone else have this problem?  I am so mad.

    If the tech you talked to said anything about a "hard drive", he was completely ignorant or misspeaking rather badly. The iPads have no hard drive; the storage is all solid state. You may wish to talk to another technician, or make an appointment at an Apple Store if there's one near you, and confirm the diagnosis of a hardware failure.
    If you've confirmed that it is indeed a hardware failure, then you can pay the replacement price, find an independent iPad service shop and see if they can do a repair for less, or buy a new iPad. If it were me I would put the money toward a new, or at least newer, iPad rather than pay the replacement charge. You can get some good deals on refurbished iPad 2 and third-generation iPads from the Apple Store, any of which will run the most current versions of iOS, something which the first-gen iPad will not, and would come with a full warranty (which could be extended to two years with AppleCare).
    As to why your iPad failed, it's impossible to say with any certainty. The circuitry could have had a tiny flaw that finally failed, or the iPad could have received a static shock, something quite common in many areas in the winter when the air is dry.  Sorry it happend to you, but anything can fail.
    Regards.
    Message was edited by: varjak paw

  • Security Deposit Refund after one year

    I have paid every phone bill for the past 11 months and I am wondering when I am eligible to have my security deposit returned. I have had no luck with other inquiries I have made regarding this deposit in the past.

        Hi Brandon,
    I appreciate your inquiry about the security deposit. In order to be eligible to receive a security deposit refund in full, the account must meet several criteria:
      • 350 days of active service (the 350 days begins from the point of activation, not from the time the security deposit is applied to the account).
      • No suspensions due to non-payment.
      • 12 consecutive months of timely, uninterrupted service.
      • No payments returned from bank
    Account balance current (no more than 30 days past due).
      • No related account delinquent or written off requiring payment.
    If the account remains active after one year of service, the security deposit will be automatically refunded within 1 - 2 billing cycles.
    EdW_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • Request is active after all the records loaded

    Dear Experts,
    I am extracting data from R/3 through custom Data source. While creating data source, I used custom Function Module.
    I have checked in RSA3, 9565 Records are available.
    When I start extract from BW side all the records (9565) fetched, but request still in yellow. Same way I have checked in R/3 side in SM37 job status is “Active” (After 5 Hours also).
    Please provide the solution.
    Thanks in Advance.
    Regards,
    Selva

    hi,
    in the monitor screen select that requestselect refresh request for 1 more 2 minutes. otherwise come out the screenwait for some time-go to that request check it out.
    select your requestselect details tabsee error.
    if helpful provide reward points
    regards
    harikrishna N

  • My ipad air was bought and activated AFTER September 1st and I downloaded pages, keynote and numbers. I then changed my Apple ID as the password no longer worked, these apps were also deleted I order to be updated. Now I cannot get the free version. Help?

    My ipad air was bought and activated AFTER September 1st (activated December 25th) and I downloaded pages, keynote and numbers. I then changed my Apple ID as the password no longer worked, These apps had to be deleted as I needed to update them. Now I cannot get the free version on my ipad. I have searched the internet to see if there is a solution, and I found a few but unfortunately none have worked. I desperately need these apps as my iPad is used for school. Is this an issue I should take up with the apple support centre or something? Please help! Thanks

    How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
    http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
     Cheers, Tom

  • After several years, suddenly my Photoshop CS wants me to reactivate or else the product is worthless.  Fine, I have the activation code, but nowhere to put it!  HELP!!!

    After several years, suddenly my Photoshop CS wants me to reactivate or else the product is worthless.  Fine, I have the activation code, but nowhere to put it!  HELP!!!

    Activation for CS has been retired. You won't be able to reactivate it, so Adobe has provided a free non activated Photoshop CS2.
    Download Acrobat 7 and CS2 products
    Gene

  • IOS 5.1, iPad 2, Safari shuts down after almost any transaction, sometimes it completes it, and sometimes not?

    iOS 5.1, iPad 2, Safari shuts down after almost any transaction, sometimes it completes it, and sometimes not?

    Almost similar problem..after latest updation ofios and itunes,I cant sync with itunes on computer further,everytime computer faces sudden shut down with itunes usage.
    I have ipad 1.

  • I buy a ipad from my friend before one year now i just restore it activation is need old iclould account what my friend dinnt know about it how can i activate in a diffrent apple account

    i buy a ipad from my friend before one year now i just restore it activation is need old iclould account what my friend dinnt know about it how can i activate in a diffrent apple account

    You friend has to disable Find My iPad for you, there's nothing you can do.
    https://iforgot.apple.com.

Maybe you are looking for

  • Hi I am having activation reloading problems

    Hi I am a lomg time adobe user. going back to PE 5. As I have 4 pcs I user PE 9 on two and win 11 on the other two. I  have also purchased Lightroom 3. Following a major computer crash when there was no opportunity to deacticate programs. I have just

  • Double buffering for shape animation

    Hello people, I'm building an applet which animates some text (a shape with various setting for stroke, fill, etc.) and translating it from x1 to x2 using AffineTransform. How can I clear the screen to create an animation effect and double buffering

  • Update Header & Footer deletes footer in Acrobat Pro 9.2

    I am using Acrobat Pro to add a header to a pdf document that was created from MS Word. This MS Word document has a footer but the header is blank. I can save the word document as a pdf using the Acrobat plugin and then add a header using Acrobat Pro

  • Runtime Error- PC00_m40_calc

    Gurus   When i run Payroll Driver PC00_m40_calc, following dump is comming. Kindly let me know why this is appearing. Runtime Errors         SYNTAX_ERROR Date and Time          19.10.2011 12:08:03 Short text      Syntax error in program "HINCALC0 ".

  • How to start of with Oracle HCM fusion applications to gain good grasp on the technology

    I have been working in Siebel for a long time and I am currently moving to Oracle Fusion HCM application.I would like to know the best way to start up with it and I would also like to know the possible way to go about it so that having 7years of expe