My iPad is showing the itunes logo with a charging plug
I cannot get the itunes logo off the screen. It is fully charged.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Similar Messages
-
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
In need of some help, my Ipad turned off two days ago. I pushed the home button and the start to reset. Now it shows the Itunes logo with the connecter cord and an arrow. I plugged it into my PC, and there was an update for my Ipad. Waited the three hours for the update and disconnected hoping that everything was fixed. Would not turn on again so held the start/home and it still shows the Itunes logo, and when I plug it into my PC, Itunes will no longer open. I live three hours away from the nearest Apple store and would like to get it fixed at home if possible.
Did you expect iTunes to start automatically or did you start it yourself? Start iTunes and then connect the iPad.
-
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?
That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
iTunes: Restoring iOS software - Support - Apple -
Good day, please help do a manual reset on my iphone 4s. I was updating my itunes and all a sudden i discover the USB cord disconnected while updating which later show me itunes logo with the USB cord charger display since yesterday. Help me gain access back to my iphone 4s so it can start working effectively . Thanks.
http://support.apple.com/kb/ht1808
-
I have just tried updating my ipad air and it locked up on me showing an icon of itunes and a picture of a cord on the screen.
Something went wrong and you have to restore the software now. Connect your iPad to your computer and launch iTunes and try restoring it by selecting the iPad in the devices tab at the top in the upper right corner of the iTunes window or in the left sidebar and then click on Restore in the Summary window on the right.
If you can't restore that way, then you will have to use recovery mode.
iTunes: Restoring iOS software - Support - Apple
The last part of the support article will take you to a link that describes how to put your iPad into recovery mode, if you need it. -
i used my wifi to download ios 8 after like 5 hours it finished and then it let me install, while installing the software it shutdown and everytime i try to open it it shows up the itunes and the usp cable logo... when i plug in the usp cable it says in itunes( ipad recovery mode) and when i press restore it start downloading the ios software again...... wats tht and what i can do pls help. thnx
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My ipad screen is showing a itunes logo with a charger indicator???
my ipad screen is showing itunes with a charger pointing??
You need to have the latest version of iTunes installed on your computer. Then connect your iPad to your computer and start iTunes. From there you should get on screen instructions. If you're not sure see the getting started link in a previous post.
-
HT200126 Tv device is turned off and won't work its on but it shows the iTunes logo with no movement
The apple tv is closed but wont show any thing expect a logo of Apple iTunes we know it wants a restart but the restart won't work
I would connect it by microUSB cable to a computer and use itunes on the computer to restore the firmware of the appletv if that did not work then if I would return it under warrenty if it's under warrenty
-
I can't get my iphone 4s out of recovery mode. I have tried many things including: connecting it to iTunes and going through the recovery steps, holding down the home button and the lock button until the apple icon appears. Neither of these has worked.
Place the device in DFU mode (google it) and restore.
-
anybody here?
http://support.apple.com/kb/ht1808
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
HT201412 My iPad turns on but it shows an iTunes logo with a USB, why?
I recently updated my iOS and when it finished, it turned back on, only to show the iTunes logo with a USB. I connected it to my computer and restored it still doesn't work and continues to show the image
Try forcing it into recovery mode if you can't restore the conventional way.
You can read about it here.
http://support.apple.com/kb/ht4097
But this is how it goes ....
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?
iPad is in Recovery mode.
Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start.
Maybe you are looking for
-
Tab Bar Control and the Default "More" Behavior
I've got a client who wants an app with 8 tabs. The only problem is that they don't like the default "more" behavior with the tableviewcontroller containing the extra tab content. What they want is to hit "more" to see the next four tabs replace the
-
Ensure that a webi processing server is dedicated to a certain publication
Hi there I'am working on setting up a BO XI 3.1 sp6 cluster. I would like to ensure that heavy monthly publications will run correctly even if one or many users launch very long report s at the same time. ( both DESKI ans WEBI) Th
-
Why does my Blog not publish with the rest of my new pages and photos????
Much more work was done on my iWebsite today and I even made a rudimentary beginning of a blog. QUESTION: Why does my blog not publish? Lorna in Southern California
-
hi all, i am new to oracle, so it may be a very simple question for you, but i couldn't find the answer though i read all the documentation and manual stuff. i have already installed trial version of oracle 8.1.7 , though i had some warnings( or erro
-
Is there ANY way to boot up with OS 9?!?!
Hi, this is my first post here, and I'm pretty desperate. I've recently upgraded to 10.4.7, and I've unfortunately just learned that I've lost the ability to start in OS 9. Actually, it's been lost for a while now, but I've just now noticed when I ne