My iPad is stuck in recovery mode, and wont stay turned off in order to use redsnow.

      Alright so my iPad is stuck in recovery mode. I did some research and arrived at redsnow to fix the problem. In order to use redsnow's recovery fix option I have to power down my iPad. When I hold the sleep button though, no "slide to power off" appears, the screen just goes black then reboots into recovery mode 3 or 4 seconds later. Restarting it via holding the sleep and home buttons doesn't do anything. How do I get it to stay powered down? Any advice would be greatly appreciated.

I believe I may have used the wrong terminology. My iPad screen looks identical to the picture shown in the link, which is what I reffered to as Recovery Mode. I was looking for a way to return to normal functionality, without having to restore my iPad. I have never backed up this iPad and would prefer not to lose any information on it. If this is impossible then I will just restore it and carry on.
My main issue with restoring it is that I don't want to lose the pictures on it. If the restore doesn't erase the pictures, then I apologize for wasting your time and will be restoring it immediatly. However if I will lose the pictures than I'd prefer any other method of exiting this screen.

Similar Messages

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • How do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    how do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    http://support.apple.com/kb/TS3694#error1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    http://support.apple.com/kb/TS3694#error1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • My iPhone 5s is stuck in recovery mode and won't turn on, I've tried to restore and update it to iTunes and its finding my phone, but saying an error has occurred, any ideas?

    My iPhone 5s is stuck in recovery mode and won't turn on, I've tried to restore and update it to iTunes and its finding my phone, but saying an error has occurred and won't work, the software is up to date, it just automatically switched itself off and when I try to turn it on, it shows the White background with the apple logo asif it's going to turn itself on but then switches off after a couple of seconds, what can I do? ive already taken it to a shop and he's looked at it, but said he can't fix it, thanks.

    Visit an Authorized Apple Service Provider or Apple Store to get it checked. If they can't fix this, you'll have to pay the Out-Of-Warranty-Service fee to get a new replacement for a reduced price:
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • Ipod stuck in recovery mode and wont restore

    ipod stuck in recovery mode and wont restore.Also not reconized in itunes anylonger.When I check my usb in device manager says in recovery mode!
    Using PC with windows 7 64bit! Tried DFU mode but it boots back showing a usb,plus an itunes icon on the screen!

    - Reboot the computer
    - Try another USB port and cable
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • TS3694 Ipad is stuck in recovery mode and can not advance after attempted IOS 7 update

    After attempting to upload IOS 7 for ipad the Ipad locked up in recovery mode and I get the 3194 error message

    I'm getting the same message, and I have had to restore my iPad and lost all my settings!

  • How would i fix my iPhone 4 that is stuck in recovery mode and wont properly restore with error code 21?

    I've already updated my iTunes to the latest version available for PC. The phone is stuck in recovery mode and if I disconnect it from the computer it goes black and then cycles in the reboot screen.  All im trying to do is restore to factory settings.

    Hi Richard_NMLB,
    I'm sorry to hear you are having issues with your iPhone. If your iPhone is currently stuck in Recovery Mode, and/or you are unable to restore it from iTunes, you may find the information and troubleshooting steps outlined in the following articles helpful (bit unclear what exactly is happening when you try to restore):
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Resolve iOS update and restore errors in iTunes - Apple Support
    Regards,
    - Brenden

  • HT4623 my sons iPad is stuck in recovery mode and my his only option on iTunes says restore iPad and he does not want to do that. what do we do?

    My sons ipad2 is stuck in recovery mode. The only option on I tunes if to restore the iPad. However, he does not want to restore it and lose all of his things on the iPad.

    Does he have a backup on his computer or iCloud?
    You can redownload apps/music etc for free.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • My iphone is stuck in recovery mode and wont recover in itunes

    hi all, my iphone is stuck in recovery mode, have tried holding down buttons and reconnecting to itunes, it still is frozen,,,what do i do????

    I'm having the same problem!!! My iphone worked perfectly until all of a sudden it says i can't receive or make calls and that i need to restore it? So i try but then right in the middle of restoring it, my iphone just disconnects by itself?

  • Iphone 4 Stuck in Recovery Mode And Wont Restore

    Iphone 4 wont restore and is stuck in recovery mode.Help!!!!

    Did you try again to connect in recovery mode?
    iOS: Unable to update or restore
    DFU mode might also help, unless your device has been jailbroken.
    iPhone DFU mode

  • HT201263 iphone is stuck in recovery mode and wont restore with the latest itunes

    My iphone 3 is stuck in recovery mode. It wont restore with the latest itunes what can i do aside from thowing it. please help.

    I have the same problem today. I accidentally let it slip off my lap right in the middle of the restore.   I didn't capture the error code when failed but now I just have a black screen with the itunes logo.  It isn't displayed in Windows explorer or itunes, however I do hear my computer acknowledge something has been plugged in when I disconnect the cable and reconnect.  What should I do?

  • My ipod is stuck in recovery mode and wont restore

    so i plugged my ipod touch in the other day and updated itunes, but then my ipod went in to recovery mode and itunes said i needed to restore it...so i clicked restore, then restore and update, then it took 2 hours to download and nothing happened afterwards. its come up with error 1604 a few times and wont restore. i hav tried so many things-i've put it in DFU, i've even tried on another computer and on my laptop that had no memory of it. this is the 3rd time this has happened to my ipod now and it is so annoying !! the other 2 times i hav taken it to a apple store and they hav fixed it but i dont wanna keep having to do that-and i dont see y they can fix but i cant    please help me it would be much appresiated.

    i got it solved but i didnt do wat u said. im not completely sure y it decided to work but i think it was cos i tried to erase sync history thx anyway

  • Ipod touch is locked(pw) in recovery mode and cant be turned off

    i havent been able to use my ipod touch in over a year. its locked with my password and its stuck in recovery mode. ive tried to do the recovery process but it causes for you to turn the ipod off well i cant ... i hold down the sleep.wake button and the home the screen will go black but then when i release it turns back on. then when i connect to itunes it just tells me i need to unlock it. and im driving myself crazy trying to figure this out

    Try placing the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Next, if it stays one, let the battery fully drain. After charging for an hour try again.

  • IPad 2 stuck in recovery mode and does not respond to usual cures.

    I wonder if anyone can suggest what further I can do to get an iPad 2 16MB WiFI model out of recovery mode.  The machine was previously working normally but after a charge would not turn on.  It connected to iTunes on a Windows system when started using the home button press before USB plug method.  iTunes reported the iPad in restore mode even though the diagnostic tools menu in iTunes said that the ipad was not connected.  The Windows system device manager showed that the Apple USB driver was loaded but did not show the iPad as a device. However, running restore from iTunes seemed to work correctly with the progress bar showing on the iPad and the information bar on iTunes showing installation of software and firmware.  iTunes then said that the iPad would restart - but it did not.  It just stayed in restore mode.  A new USB cable made no difference and the same thing happens when I repeat the attempted restore on another Windows system.  I have done the attempted restore multiple times as has been suggested is needed.  I also let the battery run flat before doing restore attempts. Both Windows system were cleaned of everything non essential and the iTunes is up to date.  Doing the restore from DFU mode gives the same result. I have occasionally had the error code oxe8000084 reported by iTunes.  Am I dealing with a hardware fault?

    This is the error report from iTunes which despite saying that device connectivity fails - seems to be able to see what is on the iPad.:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Acer Aspire 5732Z
    iTunes 11.1.0.126
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
      iTunes Serial Number 00E0BDA80A765FC0
    Current user is not an administrator.
    The current local date and time is 2013-10-06 17:13:18.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    (Standard display types), Standard VGA Graphics Adapter
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
        **** External Plug-ins Information ****
      No external plug-ins installed.
      **** Network Connectivity Tests ****
      Network Adapter Information
      Adapter Name:          {EA4D900B-F6D1-4672-854A-C64A3F3650C1}
    Description:          Broadcom 802.11n Network Adapter
    IP Address:          10.0.0.5
    Subnet Mask:          255.255.255.0
    Default Gateway:          10.0.0.138
    DHCP Enabled:          Yes
    DHCP Server:          10.0.0.138
    Lease Obtained:          Sun Oct 06 18:01:20 2013
    Lease Expires:          Sun Oct 06 19:01:20 2013
    DNS Servers:          10.0.0.138
    Adapter Name:          {FE6F70C0-1133-45C5-B4EF-D9BF04CE4923}
    Description:          Atheros AR8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 02:00:00 1970
    Lease Expires:          Thu Jan 01 02:00:00 1970
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-10-03 18:21:08.
       **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
      D: Slimtype DVD A  DS8A4SH, Rev CA11
    Drive is empty.
         **** Device Connectivity Tests ****
    iPodService 11.1.0.126 (x64) is currently running.
    iTunesHelper 11.1.0.126 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller
    Standard Enhanced PCI to USB Host Controller
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPad 2 running firmware version 7.0.2
    Serial Number:          DN6G8MG7DKPH
    **** Device Sync Tests ****
    No iPod, iPhone or iPad found.

Maybe you are looking for

  • External Hard Drive says there is not enough space even though it is empty!

    Hi, I have just backed up all my data with Chronosync. I then selected all and put it in my trash, so my external hard drive would have enough space for a backup. But when I try to use Time Machine it says that the external hard drive still has all t

  • Format Number Function

    Hello All, I am facing a problem in Message Mapping. In the Arithmatic Category we have used the function Format Number. The Number Format  is 0.0 Decimal Separator is (BLANK) In this case If I input any value say 8 or 8.0 then the output should be 8

  • CRIO user LED does not seem to work!!

    The LED shows up as a digital line output in my LV project, and shows up in the FPGA I/O node (along with all the other I/O I have configured), but I can't seem to get it to do anything. I've been able to successfully compile a variety of different V

  • Error message on email on droid razr

    Keep getting connection error. Unable to connect to imap.vsw.net. (read error: ssl=0x9c2750:i/o error during system call.  Started on one of my accounts now its doing it on others.  Can anyone help?

  • How to Install CA Certificates in B2B

    Hello I am new to B2B and I got CA and trusted certificates from our client. I used KeyStore tool and loaded all CA and trusted certificates and generated .jks file and used in the B2B certification section. With this I am able to connect to the clie