My ipad is stuck on safari
my ipad is stuck on safari only
If pressing the home button does nothing, try powering the iPad off and on and/or do a reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release. A reset is similar to a computer restart.
Similar Messages
-
My Ipad is stuck on safari pages
My ipad is stuck on a safari page. I cannot close page. what can I do? I already turned ipad off, and still no luck
You can also try this .. Go to Settings>Safari>Clear History, Cookies and Cache. The restart the iPad. Hold down on the sleep button and slide the red slider when it appears. Then start up by holding the sleep button until the apple logo appears, let go of the button.
Try Safari again. -
My iPad is stuck on a blue screen. It will not let me search. It is stuck on Google search page. I cannot get out of there or navigate between bookmarks. Can you help me, please.
Hi wolfsong.warrior,
Reset your device: Press down on the Home and Wake/Sleep buttons at the same time and continue to hold them until the Silver Apple appears (no data will be lost). Once the Home screen comes back up, check to see if everything is working correctly now.
Cheers,
GB -
I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support. -
Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. I have tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway i try. I have searched answers to this but to no avail.
LeighHi Demo,
Yes, I have not made myself clear, I apologise.
I have tried downloading apps from itunes in order to set up a game for my son, when I go to click on a link, be this in itunes, or on the web, Safari revolts back informing the address is invalid. I read by coping a link and pasting into the URL, this would do it, but not so.
My goal then, is to install Minecraft for my son, I would then download an app to allow this but I am unable to get this far due to Safari insulting the address I ask it to go to
The iPad is first generation
OS 5.1.1 Software up to date.
Thank you in advance for your time -
iCloud backup is unable to access my account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete or edit my iCloud account?
You can eirther I think go on ITunes or if you can get to settings you would just go to iCloud.
-
IPad Mini stuck after iOS 8.0.2 update: How do I recover my data?
I purchased an iPad Mini with Retina display just before leaving on vacation 2 weeks ago and used it to take 100's of pictures.
While waiting for my return flight home I decided to apply the iOS 8.0.2 update. WHAT A MISTAKE!!! Now, my iPad is stuck in Recovery Mode and won't boot up. I tried different utilities (Mac FoneLab, RescuePhone, iPad Data Recovery, iFoneBox, ReiBoot), but none of them worked.
What can I do to recover my pictures? I have no backups.
Note: I set a simple passcode on my iPad. So, I think my data is encrypted (but I'm not sure).
Thank you in advance
-- DanielYOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
Ipad mini retina display safari crashed with ios 8.0.2
After updating my daughters iPad Mini retina display, safari crashes as soon as anything is entered in the search box. This started after IOS 8.0.2 update.
I have rebooted and reset the iPad. I have cleared the history and website data, but nothing has helped.Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings -
My IPad is stuck on Verifying. I'm on the Settings page and there is a box that says Account not Verified. At the bottom is something in red asking me if I want Delete Account? It's been stuck for an hour. I tried turning my IPad off, but when I go back on and into Settings it's still there. Does anyone know how to get out of this? Thank you.
To do a reboot, press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
-
My iPad is stuck in recovery mode. It was suggested before that I upgrade my computer, so I downloaded Snow Leopard and have tried resetting it, but it still isn't working. What can I try next?
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
I started to update my ipad but I have an old MacBook and it's really old and I don't have the correct software to update anything. But my ipad is stuck on the connect to itunes screen and wont budge. What do I do?!
Your options depend on which MacBook you have and the version of OS X installed.
To find out: > About This Mac -
My ipad is stuck in the united kingdom itunes store and i am getting a message to go back to the u.s. itunes store but do not know how to do it. Any ideas?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the changes doesn't take effect, sign out and sign in to iTunes Store -
My iPod is stuck on safari and won't turn off or return to home screen
I updated my iPod touch to iOS 6 and since then I've encounntered multiple problems. My iPod is stuck on safari and I can zoom in and zoom out but that's all I am able to do, I can't turn it off nor can I go back to the home screen. I tried letting it go on low battery but it's still on. The only button that works is the volume buttons. Help please?
If the reset is not successful, try the other items of:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
Jdeveloper 10.1.2 creating jar files in user's temporary director
Hi all, McAfee uses 100% of my PC CPU every once in a while when jdevw.exe creates jar files in C:\Documents and Settings\wase\Local Settings\Temp. They get created at seemingly random times while I am running the embedded OC4J in debug mode (Struts,
-
Mutiple Behaviors from one button
How can i set multiple behaviors to one button? I want a popup window to close when I click Submit, and also change the main page to a different website. Any help with this will be appreciated.
-
Hello All I have created one Tcode for Table maintanence. when I entered the Tcode, I m getting an message like "Create Data Processing function Module". How can I go about this.
-
Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2
Hi, Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2.Please give me the steps to configure the LDAP in weblogic 10.3.2.
-
No processing log for outbound delivery for output type
Dear Gurus, I want to see processing log for output type for outbound delivery . But when i click processing log push button for output type for outbound delivey , one error is comming as 'NO PROCESSING LOG FOR OUTPUT TYPE'. Could you please let me