My ipad is takes a few hours to save the sync changes.

My ipad is taking a few hours to save the sync changes.  It goes through all the 1-5 steps OK, but when it hits the final step, it stays there forever!  I finally have to turn the ipad off.

The iPad 2 & 3 came with a 10W charger, the 12W didn't roll out until iPad 4.  But if the OP is using an iPhone charger, or anything that delivers less than 2A DC then that would explain the lengthy charge time (9 hours does seem rather long).

Similar Messages

  • Sharepoint 2003 Message please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.

    Hi All,
      We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing wrong ?.
    Environment:
        SharePoint 2003 Service Pack 3
    SharePoint 2003 Message  :
    Please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.
    We have applied in development box it was completed in 8 hours , but when we do the same in production it was never coming back since 5 days. Not sure what happening
    Thanks in Advance
    Ravishankar Maduri MCTS,MCPD,MCP

    how large are your site collections and content databases?
    sounds to me like you're WELL past the recommendations, which could certainly cause such an impact.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

    Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

    Quote from: lcwhitlock on 04-April-14, 13:44:09
    Hello darkhawk,
    Thank you for the recommendation.  I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one  - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
    Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
    If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
    http://www.hiren.info/pages/bootcd
    Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

  • Our apologies but there was an unexpected error with the application. This problem has been noted, and an email has been sent to the administrators. Please check back in a few hours to try the download again. What is

    What is going on here. I've waited 4 weeks for my ipad which will not do anything untill I've downloaded the latest version of itunes which I can't do because this message keeps appearing,
    Our apologies but there was an unexpected error with the application.
    This problem has been noted, and an email has been sent to the administrators.
    Please check back in a few hours to try the download again.
    Reading another post, someone is still trying after two days!
    Anyone got a solution to this please, or, if not, does anyone know how to email itunes.
    Thanks, Allan

    Found this
    http://www.v3.co.uk/v3-uk/download-review/1955243/apple-itunes-1011
    Hope it helps

  • My iPhone 4 appears with no service every day, i have to restarted and a few hours later again the same problem, Any other solution please???

    my iPhone 4 appears with no service every day, i have to make restart and a few hours later again the same problem, Any other solution please???

    This is almost always a symptom of a phone that was jailbroken or hacked to unlock it.
    Where did you get the phone?

  • ---DOES IT REALLY TAKES LIKE 4 hours to convert the videos???----

    omg! my computer takes like 4 hours to convert each video so i can see it in my ipod, does it really take that time or my computer is slow??
    ty...

    oh, no ty i dont wanna buy anything jaja ty anyway.
    all my video files are in mpeg but i cant play them in the ipod like that(mpeg) i need to convert them into itunes, or how do i put the videos in my ipod in mpeg file?

  • Itunes can't read songs to sync. Every few songs Itunes stops the sync because it can't read the song.

    When I sync my ipad or iphone, Itunes will start syncing but after every few songs it syncs, itunes interupts the sync with a message saying it can't read the song. I can go to that song in my list of music and play it in itunes but itunes can't read it to sync.  This has just started happening in the last week, 06/28/13.
    Does anyone know what is going on.  The message is as follows: iTunes could not copy "such and such song" to the iphone because the file could not be read.
    rhpiper

    I didn't understand what you mean. Most of the songs itunes flags are songs I have had on my list for a long time. I did notice something else. After it sends me the message and stops syncing. I press the apply button and it seams to save the song. Then I have to start resyncing and I noticed it syncs the song that it just previously couldn't read. The problem is I have to do this 50 times to get through a sync. Also, Itunes never stops on the same songs that it did the prior sync.

  • I wanted to transfer apps from ipad to iphone, eg 1password.   Unfortunately, following the syncing process, the apps have been transferred but can't get into them and if I can, they don't have the contents in them, they're just the empty app!

    Can you advise how I can sync apps from ipad to iphone without losing data.

    Data does not sync between devices, so you can't do what you want to accomplish.
    If you want to sync 1Password, then install it on both devices and use it's iCloud sync feature.

  • I can't sync my 2nd generation iPad with my Mac. It says that the sync could not start

    I tried syncing my iPad with my Mac and once it starts to sync a message pops up saying that my iPad couldn't be synced because the sync session failed to start.
    Help!

    I can't thinl what may be causing this, are you attempting to set up your Email through Settings? That would be the way to go if you aren't.
    If they didn't work, or you are already trying to do so, then download the "Yahoo Mail" App from the App Store and use that, I know it's annoying but thats what you may have to do.
    Hope I was of assistance :-)

  • Right, so i lost my ipad about 11 or 12 months ago and was really angry but found it a few hours ago at the bottom of some old draws. ive tried charging it up but it wont come on, it has probably been dead for ages now, any help or advice?

    it has been on charge for aboput half an hour now and i have tried hard resets numerous times. i was really happy when i found it but am gutted now its not coming on. i dont want sound spoilt or anything because i did take care of it, i just really want it working again soon

    Let it charge for a while longer. Thirty minutes on the charger after sitting dead in a drawer for a year is not long enough to see if it still has life left in it. Give it another 30 minutes or so and if you don't see the charging symbol the battery is most likely dead.
    You can try plugging into your computer and see if iTunes will recognize it and if it does, try restoring the iOS software. If it remains unresponsive, you can have the battery replaced - and hope that's the only problem with the device.
    iPad Owners
    Your one-year warranty includes replacement coverage for a defective battery. You can extend your coverage to two years from the date of your iPad purchase with the AppleCare Protection Plan for iPad. During the plan’s coverage period, Apple will replace the battery if it drops below 50% of its original capacity. If it is out of warranty, Apple offers abattery replacement for $99, plus $6.95 shipping, subject to local tax. Apple disposes of your battery in an environmentally friendly manner.

  • Import into 9.3 can take a few hours... even more than 24h?

    Hi,
    recently I updated iPhoto to 9.3, after that it opened up telling me to upgrade my old iPhoto-database. All of the 9 steps were finished with 100%, the popup-window closed itself and now iPhoto is showing me a spinning wheel for over 24h now. In this forum someone wrote, that after the update process some other things have to be updated, too, and this could take up to an hour or two.
    Some days ago i interrupted this process, and this resulted in a broken database, which iPhoto was unable to repair. Luckily, I had my latest backup at hands.
    I am using a MacBook Air (2.13 GHz Intel Core 2 Duo), 4GB RAM, 30GB free space on my hard drive.
    Mac OS X Version 10.7.4
    iPhoto Version 9.3
    iPhoto-Library: 94 GB
    Should I wait another 24 hours? Can I switch back to iPhoto 9.2.x?
    Thanks in advance
    Andreas

    Apple Hotline helped me out of this.
    Start iPhoto with ALT-CMD keys until a popup appears,
    select "repair photo library",
    wait until it is finished,
    start iphoto (it will crash),
    start iphoto again with ALT-key pressed until another popup appears,
    select your iphoto library from the file dialogue,
    upgrade process begins,
    upgrade process will finish,
    iphoto restarts and rebuilds the miniature pictures,
    everything is fine now...
    Good luck
    Andreas

  • HT1338 I purchased and tried to download the Lion 10.7 software. I had trouble installing it and spoke with tech support. They helped with the install via a ethernet port. Said it would take a few hours. It did not download and now there is no record of i

    I tried downloading the Lion 10.7 software and contacted customer support thinking I needed an upgrade to a higher processor speed.
    He stated I needed to download using an eternet cable rather than wireless.
    So, I connected the cables and the software upgrade which I paid for began to download.
    He stated it would takle about 2 - 3 hours for the download to complete. Somehow the download is paused, no pun intended,
    and I cannot get the paused to un pause.
    I logged onto my account and the apple store doesn't have a record of the transaction.
    So, how do I download the software I paid for?
    I appreciate your help.

    Hi,
    You can try to [https://www.mozilla.org/en-US/firefox/new/ download the latest full installer] and upgrade. Please make sure to right-click the file and '''Run as administrator''' to begin the upgrade installation.
    You may also want to [https://support.mozilla.org/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&e=sph&as=s backup] personal data/folder. Firefox stores the personal profile/data separate from its internal files. [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

  • When I logon to iTunes on my iPad it takes my login and password but the apps I'm trying to download don't install?

    When I log on to iTunes on my iPad to install apps iTunes accepts my login and password but doesn't download the apps.  How do I fix?

    Were thse apps you're downloaidng fresh or updating them?

  • Why is my macbook making the cd startup sound every few hours or within the

    first hour it's been on?

    Is there a disc in the optical drive?
    Either way, the OS will spin things up occasionally - it will 'poll' or check all drives from time to time to see if anything changed.

  • I notice that Foxfire 4 sometimes shows 50 to 60% CPU usage for no apparent reason. If I reboot, its back to normal for a few hours. Then the same problem recurrs and I have to reboot again. I have just upgraded to 4.0.1. Don't know if it helps

    At the same time, I often see ccsvchst.exe using 30 to 50% CPU to really slow everything down. I checked this with Norton; and they uninstall/reinstalled Norton - three times. I still see this program with excessive CPU usage sometimes. If I reboot, sometimes it helps. Other times, not.

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

Maybe you are looking for