My iPad is very jittery since the ios8 update, how do I stop this

SSince upgrading when I scroll up & down the screen shudders & does not work properly. It was alright before. Is there an answer in the settings that would help stop this. Also when I check my emails & delete them, which ever one of my addresses the iPad is stuck on it. Please help.

Try a Reboot press & hold power button & menu button Hold both down until you see Apple Logo You will not lose any data. Bsydd uk

Similar Messages

  • When I listen try to listen to music on my ipad it starts skipping though the whole playlist, how can I stop this?

    Help Please

    Then RESET:
    • Press & hold both Home and Sleep/Wake until the red power-off slider appears
    • Continue holding both down until that display goes away, replaced by the whilte Apple logo on a blank screen
    • Let the normal boot process continue and, once up again, try your app.
    (And I guess I don't have to say that all I'm doing here in paraphrasing what's in your User's Guide, do I?)

  • I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

    I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
    Thanks so much!

    FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
    -Close FCP
    -Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
    -Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
    -Empty your trash
    Relaunch FCP and see if that worked.
    Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
    EDIT: Or use the really simple explaination that X posted as I was typing.

  • Ever since the ios8 updates i cant do calls when i need to or when someone tries to call me or facetime me i would try to accept and it would say connecting or end it. like *** it screwed up my phone. and my apps always crash

    ever since the ios8 updates i cant do calls when i need to or when someone tries to call me or facetime me i would try to accept and it would say connecting or end it. like *** it screwed up my phone. and my apps always crash

    The process may vary among phones, but on the Bionic:
    Power down phone
    Hold volume up/down & power simultaneously
    Use volume down to navigate to 'Recovery', use volume up to select
    Should see screen with triangle and exclamation point next to an Android
    Press volume up/down simultaneously
    Use volume rocker to navigate to 'wipe cache' and use power button to select
    Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select

  • TS4118 My calendar entries are not duplicated in either iCloud, or iPad - but are duplicated on my iPhone.  How do I stop this, and also how do I delete the duplicates???

    My calendar entries are not duplicated in either iCloud, or iPad - but are duplicated on my iPhone.  How do I stop this, and also how do I delete the duplicates???

    mervrich,
    Use the "Troubleshooting iOS devices" link in iCloud: Troubleshooting iCloud Calendar.

  • I use iPhone 5s and iPad Air to take photos. They download automatically to my iMac. However, I often get dups, triplicates or more on the iMac. How can I stop this and how can I get rid of the extras that are already there?

    I use iPhone 5s and iPad Air to take photos. They download automatically to my iMac. However, I often get dups, triplicates or more on the iMac. How can I stop this and how can I get rid of the extras that are already there?

    Try upgrading your Mac to the newest version of OS X Mavericks, and try upgrading your iPhone and iPad to the newest version of iOS 7.
    OS X Mavericks may not be in the Mac App Store by now, but you can find the newest version of Mavericks here at download.com: http://download.cnet.com/Apple-Mac-OS-X-Mavericks/3000-18513_4-76018588.html. Note: Download.com it a safe website to download free software.

  • Please I just got an iPad 3 and it keeps restarting itself. How do I stop this. Done hard reset and system reset.

    Please I just got an iPad 3 and it keeps restarting itself. How do I stop this. Done hard reset and system reset.

    iTunes: Restoring iOS software
    You will probably need to restore using Recovery Mode.
    iPad: Unable to update or restore
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • Firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    Hello, Please make sure to get a fresh copy of Firefox from
    http://www.mozilla.org/en-US/firefox/all
    Have a nice day

  • Whenever I download an app on my iPad it automatically downloads it onto my iPhone - how can I stop this from happening?

    Whenever I download an app on my iPad it automatically downloads it onto my iPhone - how can I stop this from happening?

    Automatic Downloads...
    http://support.apple.com/kb/ht4539
    Settings > Store > Automatic Downloads > Music/Apps > Off

  • Opening a new tab opens my history on the left. How do I stop this from happening?

    when opening a new tab in safari, it automatically opens my history in a column on the left. How do I stop this from happening?

    IF you change the view of the left column to "Bookmarks" or "Favorites" this is what will be shown rather than "History".
    There is no way to prevent this column from being shown but it can be dismissed by touching the "Book" icon at the top-left of the screen.

  • Have 2  yr. old original iPad that continually asks to be reactivated.  How do I stop this short of doing a Restore and reseeting everything to factory settings?  I do not want to lose apps, mt cellular setup, etc that I have

    I got a good solution yesterday on this forum on reactivating with iTunes, which was successful.  I was able to see iTunes communicating with the iPad.  All of the info on the home screen reappeared, and even my cellular was restored, which by the way was how I got into this mess in the first place.  I had lost my cellular ability (the iPad was not recognizing) so I had powered down and back up again; that is how this whole problem started.
    However, this morning, I awoke to no cellular recognition (I know I was getting a good cell signal), and when I tried to reboot the iPad to see if that would restore my cell signal to the iPad, the whole "Activation Required" loop started again.
    This time however, connecting to iTunes did not automatically help.  I had the choice onlt to Restore, which I only wan t to do as a last resort. Anyone able to give me an assist on this?

    I got a good solution yesterday on this forum on reactivating with iTunes, which was successful.  I was able to see iTunes communicating with the iPad.  All of the info on the home screen reappeared, and even my cellular was restored, which by the way was how I got into this mess in the first place.  I had lost my cellular ability (the iPad was not recognizing) so I had powered down and back up again; that is how this whole problem started.
    However, this morning, I awoke to no cellular recognition (I know I was getting a good cell signal), and when I tried to reboot the iPad to see if that would restore my cell signal to the iPad, the whole "Activation Required" loop started again.
    This time however, connecting to iTunes did not automatically help.  I had the choice onlt to Restore, which I only wan t to do as a last resort. Anyone able to give me an assist on this?

  • TS2755 keep receiving the same text message multiple times, at the same time of the night. How can I stop this?Thabnks

    Hi
    I keep on receiving the same text message multiple times and at around the same time each night. Any idea how I can stop this happening? The text messages are originating from to separate Saudi Arabian mobile numbers. Both these people are listed in my contacts so do you think if I delete their names it might stop the texts coming htrough each night?
    Cheers

    Deleting the people from your contacts will not stop the messages. Have you tried talking to the people and finding out if they're sending you messages? You could try contacting your carrier and finding out what blocking services they offer. However, theat would block all messages from those people.

  • Using Firefox on Windows 7, if I leave Firefox running but the computer not connected to the internet (while I leave the computer for a while), Firefox reconnects to the internet. How do I stop this?

    If I leave my computer unattended, with Firefox running but the computer not connected to the internet (using a modem), Firefox (or the pages displayed on it) will reconnect with the internet. I have not allowed auto-reconnection. So how do I stop this?

    install new copy on os
    try again

  • Every time I start Safari, uTube audio I was on last comes in loud and clear, but not the video. How can I stop this annoying overlap of sound? Thanks

    Everytime I start Safari, uTube audio I was on lat time comes in loud and clear, but not the video. How do I stop the annoying overlap of sound? Thanks.

    Try troubleshooting the Flash plug in...
    Troubleshoot Flash Player | Mac OS

Maybe you are looking for

  • Using Dreamweaver 8 and switching from a PC to a Mac

    I am currently using Dreamweaver 8 on my PC to, of course, maintain my website. In October, I will be switching to a Mac Pro Computer; and will be using Mac OS X 10.5 (Leopard). Seeing that Dreamweaver 8 also works on a Mac, will I be able to save my

  • Change field used for Mailing Labels

    Hi. I am a new Mac user and I need help with mailing labels. When I print my labels, I want to use a custom field - Label Name - as the first line on the label, rather than the name of the contact. Is there a way to do this? For example, I might have

  • Not able to View generated SQL statement

    Hi, In order to view the generated SQL statement in Receiver JDBC Adapter, i have done logSQLStatement as true in  CC still not able to view in RWB, also mesg protocol i m using in CC is "xml sql format", is it bcos of this i am not able to ? If yes,

  • Long distance

    why does verizon require dialing 1 + area code when dialing local number

  • Impact of SATA III - Especially for RAID

    Hello, I am wondering what difference in throughput/speed SATA III will bring to RAID arrays... for example, will a 6 x 1T SATA III RAID (any level) be as fast as a 12 x 1T SATA II RAID (comparable level). The practical reason for my question is this