My ipad isnt fully recognized on my pc laptop running windows 8 pro

When I plug my ipad2.4 into my laptop it only allows me to check my (DCIM) picture folder but doesn't recognize nothing else thru the usb. So I can't load it up to put music from itunes or anything else for that matter. Can someone help me to resolve this issue. I already uninstalled, restart pc, then reinstalled itunes and all apple software and nothing.

Device not recognized
http://support.apple.com/kb/TS1538

Similar Messages

  • Just got second hand iphone4s. Tried to connect to iTunes on laptop running windows 8.1. Does not detect iPhone, iPod or iPad. Can anyone help please?

    Just got a second hand iPhone 4s and tried to connect to iTunes on laptop running windows 8.1 does not detect iPhone, iPad or iPod. Can any help please? iPhone is  version 7.1 and running latest itunes

    Hello HungryHoover,
    It sounds like you are not able to see any iOS devices in iTunes on your PC. I recommend the following article to help you troubleshoot that named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Ipad not being recognized on my Mac laptop

    My Ipad Mini, (just purchased today) is not being recognized on my Mac computer under Devices in the Finder.  We also bought a IPod Shuffle and it is recognized.  I followed another person's advice from this forum and reloaded the Ipad, but it is still not recognized.  I want to move some Epub books to my Ipad, but cannot do this since it's not recognized.  I downloaded the Bluefire Reader as was suggested in the forum, but, again, the Ipad is not recognized on my laptop in order to move the books.

    It won't appear in Finder, it's not designed to mount as a drive, content is synced via your Mac's iTunes. If it's not being recognised in your Mac's iTunes then there is some troubleshooting on this page : http://support.apple.com/kb/TS1591
    You should be able to copy books to that app by connecting the iPad to your Mac and selecting it on the left-hand sidebar of your Mac's iTunes (if you have iTunes 11 then option-command-S should get the sidebar to appear), and then on the right-hand side of the iTunes screen selecting the Apps tab and scrolling down it to the file sharing section : http://support.apple.com/kb/ht4094
    If you've already directly downloaded some apps or other content onto the iPad then you may also find this page useful for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141

  • My ipad isnt being recognized in ANY way on my computer

    when i plug in my iphone it starts charging and syncing but when i plug in my ipad 2 it dosnt start charging or syncing. i even tried diffrent chords but same problem.
    help!!

    Try blowing out & cleaning out (use an old soft toothbrush or similar) the device's 30-pin or Lightning port. Dust and lint can cause connectivity issues.

  • Bonjour Services for Airserver isnt being recognized on my new PC Laptop running Windows 8.  Does anyone have any solution for this

    I am having trouble with Airserver not finding Bonjour or Windows  I have installed and repaired Bonjour and it still does ot reconize it.
    error message is
    AirServer requires Apple Bonjour to provide automatic discovery of your PC. Apple Bonjour can be installed by either Installing Itunes o by installing Bonjour Print Services for Windows.
    I have the latest Itunes and the latest Bonjour.
    Can anyone help on this.  Thanks.

    I am having trouble with Airserver not finding Bonjour or Windows  I have installed and repaired Bonjour and it still does ot reconize it.
    error message is
    AirServer requires Apple Bonjour to provide automatic discovery of your PC. Apple Bonjour can be installed by either Installing Itunes o by installing Bonjour Print Services for Windows.
    I have the latest Itunes and the latest Bonjour.
    Can anyone help on this.  Thanks.

  • My iphone is not recognized by itunes I am running Windows 8.1

    For the past few days i have been unable to sync.  When opening my itunes it will not recognize it as even a device.  I uninstalled and reinstalled already.  Check my cables, my iphone charges on all ports and i am able to access my pictures in my computer.  I checked the dev man too and that's all working fine.  I only link my contact/email/calendar with my iphone, not sure what the issue is!

    I had this problem and followed this article to fully resolve it:
    http://support.apple.com/kb/TS5376

  • I have icloud on my laptop running windows 7. If I enter an event on calendar, it will not sync to iphone or ipad??

    How can I get a calendar event to sync from icloud on my windows 7 laptop to my iphone and ipad??

    Hi tomtodd,
    If you have it setup correctly
    Set up and use iCloud for Windows
    check this article for troubleshooting iCloud Calendar
    iCloud: Troubleshooting iCloud Calendar
    Check the section for iOS devices first, then there's a section for iCloud.com and Microsoft Windows.  Try adding the event at iCloud.com for example and see if that syncs.
    Best regards,
    Nubz

  • Can you run windows 7 as vmware on mac or ipad

    Can I run windows 7 on my Mac or use a iPad and use VMware on them.

    You can run Windows on your Mac, but not on an iPad.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Mac Air 13 running Windows 7 not properly recognizing external monitor

    My Macbook Air 13 running Windows 7 Pro through Bootcamp is no longer properly recognizing an external Apple 27 inch monitor since the latest package of windows updates. When plugged in, the external display duplicates that of the laptop (both being identified as screen "1") and both at resolution 800x600. Attempts to reset resolution to appropriate levels fails. Also function to restore to an earlier date/update point won't oblige, claiming unatohrized and "catastrophic failure." Any suggestions?

    This a work around and its work for now untill Parrellel provide a fix for thier programe.
    CPU throttle will work for this issue by scalling down the process for your Parrellel for mac. Just remember anything you want to use your parrellel you have to run cputhrottle script in your terminal
    Start Active Monitor on your MAC and pay attention to prl_vm_app CPU usage
    Note that when you start using your windown on your mac via parrellel the prl_vm_app cpu usage runs over 100 and when that happens your mac start to get hot and by keeping this down using cpu throttle your mac stay cooler and doesnt get hot.
    Downlaod CPU throttle from this website and install.  http://www.willnolan.com/cputhrottle/cputhrottle.htm
    Open a terminal on your mac and run ./cputhrottle pid 50 (you can check your PID for prl_vm_app running active monitor on mac)
    The value 50 can be decrease or increase but remember the more you increase value your mac will start to run hot so keeping at 50 is recommended.
    I know this issue have been around for a while and this will help keeping your Mac cooler when running parrelle on mac

  • My 1st gen iPad is not recognized by my PC, my iMac or my macbook.  it's charged, connected directly to the usb port, shows the connect to iTunes screen,  but is not in the device list on the pc or iTunes??  I have reset it repeatedly, and rebooted???

    I am conneting my Ipad to mutiple Pcs, (windows and Mac) and it is not being recognized in the device list on itunes or the computers.  the ipad is fully charged, I have reset it numerous times and it gives me the apple icon and then the "connect to itunes" message.... but dose nothing after that.  I had it all set up and gave it to my daughter who tried to sync it with her macbook when it did this.  We are using direct connections to the computers usb ports, the cables are new, ituens is newly updated on all pc's...
    any ideas what the problem is??

    Did you already have a look at this article?
    iOS: Device recognized in iTunes for Mac OS X

  • IPad no longer recognizing CF card through USB port

    I'm a photographer, Using a USB cable to a CF card reader, I can import and view my images via the iPad. This not only is easily done, Lexar's president has a video on Youtube demonstrating this.
    I've used this feature regularly for several events.
    However just recently the iPad has simply stopped recognizing the USB reader and said that there isn't enough power to do this.
    So from 7/4-2010 through Friday,7/23 I was able to import images via this daisylink chain. Then on Saturday 7/24 I was no longer able to do this.
    The iPad does seem to be losing battery power more quickly than when I first got it, so my assumption is that it is a mechanical thing and the iPad battery is defective.
    Any thoughts? Please remember, this function operated smoothly for a month, and is described regularly in another company's marketing materials, and no changes to the iPad have taken place.

    Have you tried making sure the iPad is fully charged before doing this? I suppose so.

  • My first generation ipad no longer recognized by itunes 12.1.2.27

    I just recently updated iTunes to  12.1.2.27 now my first generation iPad is no longer recognized.
    iPad Model MC349FD / Mid 2011 iMac 3.4GHz, 32GB ram, OS X 10.10.3

    Hello there, Blueye3355.
    The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
    Apple - Support - iPad - iTunes Assistant
    http://www.apple.com/support/ipad/assistant/itunes/
    If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • IPad mini not recognized by itunes 10.6.1 (7)?

    Why is new ipad mini not recognized by iTunes 10.6.1 (7)?  Running OSX 10.5.8 software on the Mac.  Software updates both report: "up to date"

    Sorry, but you need iTunes 11 which requires OS 10.6 or higher and a Mac with an Intel processor. In other words, you need a newer Mac.
    http://www.apple.com/ipad-mini/specs/
     Cheers, Tom

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

  • My first generation iPad no longer recognized in iTunes, neither via usb nor wi-fi. Did all the steps  recommended in Apple iPad support. Now what?

    My first generation iPad is no longer recognized in iTunes. It just doesn't show up neither via USB nor via wi-fi.
    I've checked the usb connection and cable and its OK.
    I checked that iTunes is up to date on my Mac.
    I reinstalled iTunes on my Mac. 
    I restarted my Mac,
    I've restarted my iPad.
    The iPad has IOS 4.3.1 (8G4) installed. And without the iPad being recognized in iTunes  I can not update the IOS nor apps, nor remove unneeded photos. The iPad is completely filled up, no memory left to allow even updates via cellular or via wi-fi.
    Trying to gain access to update the IOS and to update APPS and to remove the pics I already have backed up and do not need on this iPad locally.
    PS: I even tried to connect the iPad to a different Mac and it was not seen in that iTunes either.
    So, what can I do now?
    Any suggestions besides using it as a paper weight?
    Thanks

    Hello there, Blueye3355.
    The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
    Apple - Support - iPad - iTunes Assistant
    http://www.apple.com/support/ipad/assistant/itunes/
    If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

Maybe you are looking for

  • Sales Orders Report - Requested Delivery date fails.

    Hello, If a customer orders Item A Quantity 10 with a requested delivery date as 10.09.2008 In sales orders under Schedule line tab it will be displayed as below if schedule line fails Delivery date Order Qty Rounded Qty Confirmed Qty 10.09.2008     

  • Marketplace Adapter

    Hello, We want to migrate BC scenario to XI. There is marketset connector used in BC. It does mapping of Idoc to XCBL format. There is customized mapping for different vendors. I found xsd for order xcbl from xcbl.org which i have imported in XI but

  • Need help/info on "database link of same name has an open connection"

    Hello, I am trying to create an application on html db (new in html db) to see if I can move data from one database (oracle 9i) say dbdev to another one called dbtest. I want to be able to select the data from html db app and by clicking on a button

  • Moving Portal Favorites for All Users

    Hi, I need to migrate all portal favorites for all users from one environment to another (Test - Prod) How can I do this with ICE when all I can see in the userhome directory a folder with my username and my favorites? Where are all the other users f

  • Sshd error while deploying agent to remote host

    Hi, Am getting the following error while deploying agent to remote host. SSH Setup failed on nodes: localhost. SSH setup failed because of any of the following reasons: sshd has gone down while doing SSH setup. The platform of the provided hosts may