My iPad keeps on flashing on recovery mode and nothing will work. PLEASE HELP.
So I was on my iPad and all of a sudden it turned black then blue, it would take snapshots of the iPad but not fully open. If I hold any buttons down, the logo for iTunes and charger shows up but flashes repeadlty. If you know a solution please help I will be VERY thankful.
_Xhessie_ wrote:
the logo for iTunes and charger shows up but flashes repeadlty. If you know a solution please help I will be VERY thankful.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Similar Messages
-
My phone is stuck in headphone mode and nothing is working! Help!
My IPhone 4S is stuck in headphone mode. I have tried everything from putting my phone in rice overnight, blowing and sucking air in the headphone jack,and hard resetting it but nothing is working! Please help!!
Hello manhay,
The following article provides some additional troubleshooting that can help restore audio to your iPhone's speaker.
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
********, my ipad keep on turning into recovery mode all of sudden. At least once a month... its really **** me off.. Apple do something!!
You're not talking to Apple.
Restore it as a new device. Do NOT restore your backup. It's likely the problem is contained in your backup. -
when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you
hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible. -
my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?
Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well. -
My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me
I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
Thanks,
Nathan. -
I am in recovery mode and nothing is backed up
I am in recovery mode and nothing is backed up
Bigmoneyty wrote:
No, i don't because I have IOS 4 (long story). I guess I will try to get Apple to try to give me some money to give my apps back.
What? Apple is not going to give you any money! If you purchased apps, they are in your purchased list and you can re-download them. What is happening here is your issue, not Apple's. They will not compensate you for not backing up your phone. -
I have a iPhone 4 in recovery mode and it will not restore to factory settings.
I have a iphone 4 in recovery mode and it will not restore to factory settings. I get the error message error 21 and 2001. What can I do? I have tried all the steps.
Alextails998 wrote:
I have tried all the steps.
All what steps?
Did you go through the troubleshooting information here: http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
and
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
If so, then it's a hardware problem. Make an appointment at the genius bar and get it replaced. Based on the "it was water damaged", I think it's a safe bet that it's toast. -
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
When I downloaded (on PC) the new 5 it crashed my iPad 2. I worked for two days to get it to stop the malfuction, went to the apple store for four hours, iPad crashed again, got a new one, new iPad crashed when I tried to restore my back up. Down loaded iTunes to an employees computer, I was able to restore iPad to factory settings but my itunes account is on my office computer and now I am afraid to plug it into my computer. I did delete the back up as maybe that is currupt and making it crash??? Any body know about this?
This is Linda again. The new iPad actually as not restored on my employees computer. I thought it was working. Message said the device is in recovery mode and can not be restored. I have been at the Apple store for a total of 6 hours and on the phone with support for at least 4 hours. And now the replacement has crashed??? Has this happened to any one else?
-
So here is what happened: my iPod went dead and when I went to plug it in to charge I noticed it wasn't doing the normal little battery charging symbol nor did it pop up with the apple symbol. When I opened up iTunes it told me that my iPod was stuck in recovery mode and that the only way to fix it was by restoring it. As much as it pained me to do so I did it anyways. It did the routine update and restore window, I waited the 28 minutes, but still nothing. Now when I go to restore it a window pops up that says that the iPod cannot be restored because the iPod update server cannot be contacted or is currently unavailable. I'm at a loss. This the the only form of communication that I have available to me and I need it fixed A.S.A.P. Please help!
Additional Details
My iPod is NOT jailbroken.
Now it says and unknown error occurred (3194) please help!
The lock/hold button on my iPod is broken. My iPod cannot be locked, unlocked, or shut down using this button.
Message was edited by: seadesUpdate Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
I've tried everything to get my phone out of recovery mode but nothing is working.
Hi,
I recently started updating my phone to I.O.S 8.1.3, and it was downloading and updating fine, then it said it had an error updating. I turned it off and on again to see if that would work, and when I clicked install it showed up as if it was turning off. It then showed up that I needed to connect to iTunes. So I did, and it said it was in recovery mode, and that I needed to restore. So I tried that and it said multiple times, when I got part way through the restoration, that the network had timed out when it hadn't. So I researched ways to get it out of the recovery mode.
I've tried:
holding down home and lock button
holding down lock and volume button
downloading tinyumbrella, however it wouldn't let me open it
Putting it into DFU mode and restoring
Nothing is working! I don't know what to do, I need my phone for when I'm travelling and now I don't have one.
Anyone got any more ideas? I'll be incredibly grateful.
If I can't get this to work I've wasted £200 of money on a phone that decides it's logical to kill itself. I won't be doing that again.I was trying to download TinyUmbrella because some people have said it basically kicks phones out of recovery mode, and I did try that but it hadn't worked, it kept loosing connection with the phone even though it was connected.
I took the phone to the O2 shop and they did something to restore it, so it's working fine finally thanks for replying! -
how would i put my iPod Touch in recovery mode if the screen says''iPod is disabled connect to iTunes
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
TS3681 I cant get my iphone4 out of recovery mode? Have tried everything please help
I was charging my phone overnight but his morning I aawoke to it being in recovery mode and I have tried all morning to get it out but after several attempts threw itunes it stops and claims I have come across and error 1 still cant fix the problem and need help
That is typically indicates a hardware failure.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve specific iTunes update and restore errors - Support - Apple
Maybe you are looking for
-
HT1423 Kingston Memory RAM DDR3 4GB is compatible is the same latency? or dont mater
is compatible with imac 27 inch mid 2011
-
Hi, I am getting error PLW-06002 unreachable code at quite a few places . I guess my loops have some problem but I am not able to find out reason for that. I apologize for inconveinence caused by unformatted code. I have tried to format it, please he
-
Using Sony Bravia 32" TV as a monter with my mac book colour problem
Hello, I have connected my mac book pro 13 to the tv with a genuine apple hdmi cable adaptor and a hdmi cable. I have mirrored the display in settings and can see the display on my mac on the tv. The problem is the colour is awful. The colour is over
-
MDM Workflow (no Properties pane in MS Visio)
Hi, I am using SAP MDM version (5.5 SP5) (5.5.41.70) and workflow and MS Visio 2003 Professional. When we go to MDM Data manager and create a new workflow and then click on "Microsoft visio document", system take me to MS visio screen but not show me
-
How to use GPU acceleration in final rendering process in AE CS6 updated?
Hello guys! Maybe my question is a frequent, but in fact I didn't get answer listing FAQs here. So I have new NVIDIA Geforce card where CUDA supported. I enabled Ray-Traced 3d in "composition Settings" Advanced tab and also in fast preview settings.