My ipad lock and need apply id i tried mine but did not worked
I restor the OS of my mini ipad, now its asking me for apple ID i tried mine but it did not work so please advice what shall i do.
If you are locked out, try this:
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.
Similar Messages
-
Ipad 2 keeps locking the screen or turning off every 5 sec, cannot use it. did the Reset, it does not solve the problem. any suggesstions?
You can -
1 restore
2 reset by holding home button and off button together for like 10 seconds.
3 go to settings>>general>>auto-lock>>choose never (might work..) -
Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!!
Hi
You need to check with your ISP whether or not the send mail server (SMTP) requires a password. Some do, but many do not. When you know the correct password to send mail, then you need to tell Mail as follows:
Mail menu > Preferences > Accounts > Select the account
Click on the Outgoing Mail Server (SMTP) combo box, and select Edit SMTP Server List...
In the Account Information tab put the server name
In the Advanced Tab, set up the authentication information from your ISP.
Good luck
Bob -
i forget my password to my ipod and i have try to restart it but its not working. i have done i could think of please help!!
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the
Back Up option. If you have just backed up the device, it is not necessary
to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I sign in tol my Firefox is out of date. did try to do the upgrade but did not work need help
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
I need help to get my sign in working. Need to upgrade?
how to do that?
<sub>edit: removed personal information for your protection. (philipp)</sub>I sign in told my Firefox is out of date. did try to do the upgrade but did not work. Need help
Let me know how to get my sign in working -
I need my redemption code. Followed all tips, but did not work. Had to reinstall Windows 8 due to Windows Explorer crash issue,and had to reinstall all softwares. I am a monthly regular CC customer, and dont recall my 24 digit code.
Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.
Assuming you are not manually managing your music, verify the following:
You are using the latest version of iTunes
On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
In your music library you have checked all the songs you want to sync to your phone
There are no exclamation points next to any of the songs you want to sync to your phone
You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
You have checked "Sync Music" on the Music tab of your iTunes sync settings
When everything looks correct, sync your phone. -
Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMC/PRAM resetting did not work. Does anyone have some advice or can help?
Hi Melissa,
Pretty strange, but...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it happen in Safe Mode? Reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..
I also cannot update ios..how to solve this problem..?Your going to have to perform a restore.
-
I have a MacBook Pro and would like to play VCD, which is not a supported disc. I opend the Quicktime and it showed up in the Dock but did not get a menu. Would appreciate any help.
Download a program called VLC.
http://www.videolan.org/vlc/download-macosx.html -
hello, my friend's i pad locked and need the apple id and password to unlock the setup and open the i pad but he don't remember any one of them nor his email and security questions the serial number of tha i pad is DYT*******PH and the part number is MC979ZP/A what can we do about that please solution?
<Edited by Host>Your friend will have to remember or find his account id and password, without them he won't be able to re-activate the iPad.
Does he have any of the account's downloads in his computer's iTunes library : Recovering a forgotten iTunes Store account name.
Or has he tried finding it via http://appleid.apple.com : Apple ID: How to find your Apple ID.
If he can find the account id he can then get its password reset via http://iforgot.apple.com
(As these are user-to-user forums, you're not talking to iTunes Support nor Apple, I've asked the hosts to remove the serial number from your post.) -
My iPad2 is frozen by the screen 'iPad Not Backed Up', I had followed the instruction by plugging in, locked, and connection with wi-fi but it did not work.
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
iwas updating my iphone 4 to ios 5,did NOT work.
now it is frozen with picture of phone lead,arrow and itunes icon.
phone will not connect to itunes for me to retore.
PLEASE HELP ANYONE !Have you tried putting the phone into recovery mode : http://support.apple.com/kb/HT1808 ?
-
I have screen dumps of the errors but cannot paste them
Hi Hans
Just to summarise:
If I run Photoshop Elements I get a window headed "AMT Subsystem failure". It states "This product has a problem which requires that you restart your computer before it can be launched. If you continue to see this message etc. contact Adobe Technical Support etc. Error 130:9. http etc".
I have tried to run LicenceRecovery 109. This did not work. I have tried other suggestions on the internet. Nothing worked. This included resetting FLexnet.
I then tried to uninstall and reinstall Photoshop Elements. There is no repair facility. The uninstall gets about 95% through and then stops and replaces all the files. I get a window headed "Adobe Photoshop Elements 8.0 Setup". It states "Error 1316. A network error while trying to read from the file C:\windows\installer\adobe photoshop elements 8.0.msi."
That is the details of the two screen dumps which I have.
Please advise.
Tom Lloyd
Maybe you are looking for
-
Hello, The scenario is sometimes payment is to be made on proforma invoice issued by supplier, against letter of credit. how it will happen in sap. urgent
-
Hello, I need to convert a UTC timestamp in the long form in the local version (CET) but if I use the CONVERT function I lose the decimal part (it becomes 0000000). Any idea? Thanks in advance. Angelo
-
Integrating R/3 of two different landscape using XI ?
Guys, Would like to integrate two R/3 Systems (4.6 C & 4.7) using SAP XI of two different networks which is in two different countries , for a synchronous scenario. Now , how to connect these two systems of different landscape using XI ? Cheers!
-
Exporting a section of the timeline with FCPx
Does anyone have a clue how to just export a section of timeline out with FCPx. In FCP7 you would just set your In/Out points on the timeline, go to File->Export and walla!, a segmented section of your masterpiece that you could send to a VFX or Audi
-
Odd issue editing/checking out sites.
Hey everyone, I just created a couple sites in Sharepoint 2013 online and half have a weird issue were there title and description show up below where expected, and smaller. So, I tried to edit them and there's no option to check out the ones that a