My ipad logs me out when I use email for work

My iPad logs me out when I email for work. I have to log back on. This happened all night as it was very frustrating. Has this happened to anyone? What can I do to fix this problem?

Here it is 2012 and I too have this problem with games, Safari and email. It just loggs me off after about 10 to 20 min. This all started with the last OS update. Why has no one responded??

Similar Messages

My iPad getting very warm when i use it for bit in longer time

Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?, Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?

The Temperature warning usually appears when the iPad has been set in a place where it gets so hot to the touch that you'd almost burn your hands if you picked it up. The temperature caused by the processor or charging the battery should never reach that level. If you feel your pad is too warm when you are using it Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Why do my images appear washed out when I use Save for Web?

Q: The color/brightness/tone of my image changes when I use
Save for Web. Why?
A: Photoshop is a color-managed application. The Web is not. Normally, when you view an image in
Save for Web or
ImageReady you are viewing it without color management and see it how it will appear when uploaded to the Web.
To minimize changes, Convert your image to sRGB (i.e from
Edit menu choose
Convert to Profile )before using
Save for Web. You should also make sure that
Save for Web has been configured so that images are displayed using the document color profile (see attached screenshot for guidance).
You should also ensure that your monitor properly calibrated and the gamma is set to 2.2.

Same here. Didn't get any good New Years Eve photos indoors.

Recently got a MacBook Pro. When I use it for work purposes, I plug in a large screen and key board. When in this mode I would like to shut off the laptop screen or even close the lid. Is that possible?

RECENTLY GOT A mACKbOOK PRO. WHEN USING IT FOR WORK PURPOSES I PLUG IN A LARGE SCREEN AND KEYBOARD, THAT WORKS FINE. HOWEVER WOULD LIKE TO CLOSE LID ON THE LAPTOP, OR AT LEAST SHUT DOWN THE LAPTOP SCREEN WHILE USING THE LARGE SCREEN. IS THAT POSSIBLE?

Hi Jim,
Craig is right on with his post. Hope he won't mind if I add the following link, as recently it has been noted by some posts here that there are some "quirks" with Clamshell Mode:
http://support.apple.com/kb/HT3131?viewlocale=en_US

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

My ipad 3 gets hot when i use it. i've read an article in wikipedia that apple will replace ipad3 to ipad 4. is it true? im from laoag city, ilocos norte, philippines.

my ipad 3 gets hot when i use it. i've read an article in wikipedia that apple will replace ipad3 to ipad 4. is it true? im from laoag city, ilocos norte, philippines.

Hello:
my ipad 3 gets hot when i use it.
Contact Applcare with a warranty issue.
Barry

How you can find out when someone using your icloud account

how you can find out when someone using your icloud account

Someone on a different device only needs to sign with your iCloud ID and password in order to access your account, they don't need to answer any security questions if they have your credentials. If you think this happened, you should change your iCloud password as explained here: iCloud: Change your iCloud password. After you change the password, you will need to change it on your devices by going to Settings>iCloud>Account and entering the new password.
If you want to inquire further about this, contact the Apple account security team: Apple ID: Contacting Apple for help with Apple ID account security.

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

HT5163 sim doesnt pop out when i use the paperclip for my iphone5

My SIM card won't pop out when I use the paper clip, not sure what to do. I cant get it to respond to itunes, it said could not detect device. I have a "locked SIM" on top of phone. Yes it was a crazy weekend. (but fun)

It is a bit of an angle to eject it and you have to push hard. If your weekend included immersing your iPhone in liquid it could be even a bit harder.

When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

My ipad disconnect to wifi when not using for a while

My ipad disconnect to wifi when not using for a while. is that normal?

This is absolutely normal, the iPad is turning off after a certain time to conserve energy…
If you are making large downloads, go to the "Settings", "General", "Auto-Lock" and set it to a higher value…
enjoy your magic machine

When I use SSIS for extract from OLAP Database, then the error random occurred,Error Code = 0x80040E05

I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.

I have had the same error on SQL2008 and now on SQL2012 SSIS, but have been able to eliminate / workaround.
We have a Loop Container in our Control flow that contains a data-flow task with an MDX source. The MDX query for the data-flow source is dynamically built (via an expression) on each iteration of the Loop container (however it always returns the "same shaped"
results - only the filters in the WHERE clause are different).
We've found the error to be somewhat intermittent - sometimes the package will complete successfully, other times it will fail with the 0x80040E05 error at varying iterations thru the container loop.
To alleviate the problem we setup the SQL Agent job-step for this package to re-try on failure for up to 5 retries - not an ideal workaround, but it helped to improve the success rate of the Job.
We have no idea why this error is occurring or what is causing it, however it appears to be timing-related in some way and I have only seen the issue when using a SSAS OLE-DB data source with a dynamically generated MDX query. I have managed to virtually
eliminate the error from occurring with a not ideal workaround in the SSIS package - no idea why this works/helps (hopefully Microsoft will be able to work it out and resolve the issue as it's been plaguing us since SQL2008 and is still here in SQL2012
SP1...
Workaround for MDX causing 0x80040E05 error:
Within our loop container we have added a Script task with OnSuccess precedent constraint to the data-flow task that contains the dynamically generated MDX source query. The script task simply introduces a WAIT in the processing immediately after the
data-flow task completes of about 5 seconds, before allowing SSIS to continue with the next iteration (e.g. System.Threading.Thread.Sleep(5000)).
With this delay in place we have had much more stable SSIS package executions - dont know why, but that's what we havce observed. Also note that when we migrated to SQL2012 SSIS packages the 0x80040E05 error returned, however we were able to eliminate it
once more by increasing the WAIT time to 10 seconds on this script task.
Now waiting for 10 seconds is not an ideal solution / workaround to this problem - particularly when it is contained within a Loop Container (in our case it has added nearly 30 minutes of "WAIT time" to the package execution duration), however this workaround
is better than having the package fail 80%+ of the time...
regards,
Piquet

Why am I only getting 0.24mbs download speed on my ipad over my wifi when my Microsoft laptop is working massively faster?

Why am I only getting 0.24mbs download speed & 0.47mbs upload speed on my ipad over my wifi when my Microsoft laptop is working massively faster?
I have a EE BrightBox wifi router and other devices in the house are working perfectly only problem I have is with my Apple products.

Hi,
Don't have a Mac, using new ipad, iPhone 5&4s both with ios7 but it's soo slow, Microsoft laptop is working fine over wifi so it has to be Apple devices that have the problem. Have tried all of the suggested fixes on forums but still no joy.

Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks

Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

My ipad logs me out when I use email for work

Similar Messages

Maybe you are looking for