My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Similar Messages

  • I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

    I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
    iPhone 4, iOS 7.0.3

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • My ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    my ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • TS1538 iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs

    iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs itunes???

    Follow this very helpful user tip by wjosten:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. What should I do?

    I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!

    http://support.apple.com/kb/ht1212

  • Can  you help me to solve this problem (user-exit for xd02)

    Hi!
    can  you help me to solve this problem?
    transaction XD02
    To pass the length of the field to 7 max    for    KNA1-SORT   (Search criterion 1 )
    To pass the length of the field to 4  max   for   ADRC-SORT2  (Search criterion 2)
    It is not possible to save  the customer card as long as the search criterion is not univocal
    I seek one to use-exit .
    Thanks.

    Hi,
    Check the exit SAPMF02D.
    Regards,
    Surinder

  • Hi, my name is Amit, my hot corners stop working after some time. Have to go to mission control to reset them, however they stop again after some time. This is annoying. Can someone please assist to solve this problem? Thanks Amit.

    Hi my name is Amit, after upgrading to OS X Maverick I often have problem of my Hot corners stop working after a short period of time. I have to go to mission control and have to reset them for them to start working again. However this is temparory and they stop working again and this is quite annoying. Can someone suggest a cure to this problem please. I will be grateful. Thanks Amit.

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.dock.plist
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out or restart the computer and test. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place. Log out again. Otherwise, delete the item you moved.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • HT1725 I purchased an episode of the tv show Hannibal. Attempted download. Said download was completed yet received only a 30 second trailer of the episode. Tried 4 times, used 5GB data and still don't have the episode on my iPad.

    I purchased an episode of the tv show Hannibal. Paid, downloaded to iPad but received only the 30 second trailer for that episode. Attempted 3 more times, used up 5GB of my monthly data allowance and still continued to get nothing but the trailer.

    Hello Pamela1958,
    Thanks for the question. It may be best to report an issue with your purchase. The following article outlines how to do so:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks,
    Matt M.

  • My ipod Classic hangs and freezes on the apple screen.  It will not do anything.  I tried to restore using iTunes, but came out 1415 error code, and cannot do anything about it.

    My iPod Classic which I rarely uses.  I try to refresh it and put new song into it.
    As I try with iTunes, it runs very slow and show that it had problem, need to restore it.
    When I tried, it will not and hangs, also slows my HP Win 7 system immensly.
    I tried to reset, pressing the middle and menu botton, now it hangs on the apple screen and remains there forever.
    What is the problem and how can I solve it?

    The screen is telling you to connect the iPod to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • I have an iPhone which froze during software update to a picture of iTunes and USB cable.  I have never loaded this device on my computer.  How do I unlock the phone?

    My iPhone froze while downloading a new update.  The screen now shows a picture of iTunes icon and USB cable.  How do I unlock the phone if I never registered the device on a computer?

    Have you tried to restore the iPad back to factory settings from within the Setting App?  You might also try and hard "reset" by holding the power button and the home button at the same time until the iPad 2 restarts.
    Besides that, find a friend with a computer and try to update it from their comptuer, or if it is close and convenient go to the Apple Store and they will be able to help you.

  • I have problem with browsing. when i browse a new unnessary window is open automitacally. can anyone please help to solv this problem.

    an atuomatically page open like this. http://rnzzz.exclusive-rewards.prizespy.xyz/?sov=62551901&hid=gqmqqssogwsokos&kw =DIRECT&email=email&redid=797&gsid=68&id=XNSX.1%3A%3APEERFLY-r797-t68

    If you're getting prompts that say something like this:
         To view this web content, you need to install the Java Runtime Environment
    then the Apple Java runtime is not installed. Some third-party web plugin is installed that depends on Apple Java.
    You may have installed the Oracle Java runtime, which is different. Neither installing nor removing the Oracle Java will have any effect on the prompts. The only thing that will stop the prompts is either to install Apple Java, or to remove the web plugin that depends on it, as I wrote earlier. I don't know all the possible plugins that might be involved, but I mentioned a couple of common ones.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • Hi can any one help with solving this problem

    Hi Every body,
    I had an xml file ,with using parser i want to read the xml file ,but in my xml file i had an error "&data_12546_norm_589567;"
    To process this error and read the xml file content in java file.
    How can i read the xml file.
    My xml file is this
    <?xml version="1.0" encoding="UTF-8"?>
    <Student>
    <Name initials="KRONI">
    <Softwaredepartment/>
    </Name>
    &data_12546_norm_589567;
    </Student>
    Thanks in advance
    regards
    Ram

    You have to replace & with &amp;Like below
    <?xml version="1.0" encoding="UTF-8"?>
    <Student>
    <Name initials="KRONI">
    <Softwaredepartment/>
    </Name>
    &amp;data_12546_norm_589567;
    </Student>

  • How can I define the cause of this problem?

    Hi guys,
    LKM Oracle to SQL
    IKM informix incremental update
    Source : ORACLE
    Target : INFORMIX
    - This process work across internet network (lease line).
    - Have to update a large amount of data ,around 500,000 rows,from source to target
    - Target has existing data around 70 million rows
    Here is the problem,
    When update process was executed it won't complete in step update flag useless row.
    In the opeator windows,It will show in the thunder icon which mean it still in processing.
    In the mean while,the target database seesion was already dead (missing).
    This process has take a long time I think,may be 4-5 hrs.
    So I could not detect any point of this process that ......
    this is come from network issue or come from a bug of software or something else.
    In my opinion,
    something wrong on the process "update flag useless row" because it take too long time.Then after it's finish "update flag useless row" step.(I know that this step already finish because i already check on the target database that the flag has been completely updated).It cannot send some signal back to ODI to update status in the repository that this step already finish.So It could not execute a next step.
    Any ideas,
    Many thanks in advance.

    Try booting in Safe mode. This page tells you how to do that and how it works:
    http://support.apple.com/kb/ht1564

  • Firefox 11 freezes and is lagging after few minutes. Youtube Videos are laggy while the sound is normal. Can you help me to solve this problem?

    If I restart my browser everthing works just fine for at least 5 minutes. When I watch several youtube videos, the lag comes back and the video starts to freeze aboud every second for just a faction of a second. The sound is stil played properly it only affects the graphics...
    After about 10 minutes watching videos the whole browser gets laggy . Sometimes when I type the fonts appear only about a second later. Scrolling is also affected. Some minutes later everything is back to normal but it't not allways like that?!
    I don't know what to do, I allready restarted with add-ons disabled but I didn't notice any difference. The drivers of my ati graphics card are up-to-date and I only have the problem with firefox, chrome works perfectly.
    Regards, Jan

    Hey Jan,
    [[How do I upgrade my graphics drivers?]] - see if that article helps. If nothing else works, try [[How do I upgrade my graphics drivers?#w_disabling-webgl|disabling WebGL]].
    --Tobbi

  • Can you help me to solve this problem?

    i run this dcl in command window:
    alter table t storage (freelists 3) ;
    then oracle tell moe this error :
    ORA-10620: Operation not allowed on this segment
    but as i know ,the database version which is above 9i can support this dcl.
    my database version is oracle 10G release 2,the version is ok.
    so i am so maze,can you help me ? thank you very much!

    What does:
    select tablespace_name, segment_space_management
    from all_tablespaces
    where tablespace_name in
      select tablespace_name
      from all_tables
      where table_name = 'T'
    ;return?

Maybe you are looking for

  • Airport card works in 10.1, HW test passes, but not detected at all in 10.4

    Ok, Hi. I'll first admit this is my first post so go easy on me! I just bought a used iBook G3 and it was working fine for a while until about a month ago when all kinds of weird things stared happening. Some of which those problems I solved from rea

  • Session timeout + strange characters

    Hello. We're working in a G4 eMac, OS 10.3.9. We are having two issues that probably are not related (?) but let's give it a shot: 1. This just started happening a couple of weeks ago. Odd characters are suddenly displaying in our browsers (chiefly a

  • (Solved) corebird won't start

    okay so i kind of did something i regret... i made the mistake of deleting my corebird .config files. so i thought it wouldn't be a big deal as i could always just yaourt -Rns corebird-git and then reinstall it. well it turns out it did put back the

  • Could not complete iTunes store request error 4002

    When I try to update the Genius app I get the above message " We could not complete your iTunes store request  An Unknown error ocurred, 4002". I also get this error message when I launch the ITunes. I've searched the ITunes for Windows commmunity an

  • Production order qty fld

    Hi, what is the table/fld for Production order/work order qty and scheduling agreement qty? I tried in CO03 but not getting Can anyone help me....