My Ipad Mini Remote app worked consistently until I upgraded my iTunes. Now it stops working.

The Remote app worked consistently until I upgraded my iTunes.  Now when I first open  on my ipad  it will work but on subsequent tries it won’t connect and tells me that I have to turn on home sharing (Which is already turned on). This is using my ipad mini to connect to iTunes on Win 8.1
Very frustrating. I wish I hadn't downloaded the iTunes update!

Look at this similar post https://discussions.apple.com/thread/3816868?start=15&tstart=0
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

Similar Messages

  • I have upgraded iTunes now it stops working after a few seconds.Help?

    i have upgraded iTunes now it stops working after a few seconds.Help?

    Hi Andrew,
    If you have issues with iTunes unexpectedly quitting you may find the troubleshooting steps in this article useful -
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    If you are using Windows XP, you may want to use this article -
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Ipad mini remote app will connect to my itunes library and apple tv but won't display content from itunes library on the apple tv section of remote app

    What I am trying to do is very simple, and I am sure I have done it before.
    I have an Apple TV (2nd Gen) connected to Wifi Network (Airport Extreme 802.11n) I want to stream content from the itunes library on my macbook pro over the wifi network to the Apple TV. This works no problem, home sharing is set up and I can see the itunes library under 'Computer' on the Apple TV interface. I can use the Apple Remote to scroll through and play content from my itunes. Works no problem.
    Now I want to use the remote app on my ipad mini to control the apple tv. Using up to date app (Version 3.01) Again, everything looks like it should work. I have turned on Home Sharing on the remote app settings. It works fine and both my itunes library and Apple TV show up on the interface. I can touch the itunes icon and control the itunes on my computer and play music and video on my computer screen.
    Now when I touch the apple tv icon I can't see my itunes library content to play on the apple tv. I see the below image. If I tap on the icon in the bottom left it takes me back to the screen in the first image. What is the strangest thing is that I can control the apple tv using the gestures interface! This isn't what I want though and I want to be able to see the itunes library on the screen of the ipad and play it on the apple tv. You can see in the video on this link (http://www.youtube.com/watch?v=UvEpgcE9KCs). This is what I am trying to do and I just don't understand why I don't get the screen seen at 1:25 in the video. Instead I get the screen seen in the below image. Any ideas? I know that the remote app is connecting to the apple TV because I can control it using gestures, just strange I can't see the content on the ipad like in the attached video clip, instead I see the screen in the image below. Any ideas would be greatly appreciated!

    OK, Problem solved. Software on Apple TV was VERY outdated. It had been sitting in the box for over a year and needed an update. Problem solved!

  • Ipad mini remote app will connect to my itunes library and apple tv but can't play content from itunes library on the apple tv

    What I am trying to do is very simple, and I am sure I have done it before.
    I have an Apple TV (2nd Gen) connected to Wifi Network (Airport Extreme 802.11n) I want to stream content from the itunes library on my macbook pro over the wifi network to the Apple TV. This works no problem, home sharing is set up and I can see the itunes library under 'Computer' on the Apple TV interface. I can use the Apple Remote to scroll through and play content from my itunes. Works no problem.
    Now I want to use the remote app on my ipad mini to control the apple tv. Using up to date app (Version 3.01) Again, everything looks like it should work. I have turned on Home Sharing on the remote app settings. It works fine and both my itunes library and Apple TV show up on the interface. I can touch the itunes icon and control the itunes on my computer and play music and video on my computer screen. 
    Now when I touch the apple tv icon I can't see my itunes library content to play on the apple tv. I see the below image. If I tap on the icon in the bottom left it takes me back to the screen in the first image. What is the strangest thing is that I can control the apple tv using the gestures interface! This isn't what I want though and I want to be able to see the itunes library on the screen of the ipad and play it on the apple tv. You can see in the video on this link (http://www.youtube.com/watch?v=UvEpgcE9KCs). This is what I am trying to do and I just don't understand why I don't get the screen seen at 1:25 in the video. Instead I get the screen seen in the below image.

    OK, Problem solved. Software on Apple TV was VERY outdated. It had been sitting in the box for over a year and needed an update. Problem solved!

  • Ipad mini - remote app - poster art issue

    The remote app for the ipad mini when browsing through movies does not recognize all the movie titles poster art, and instead of displaying the appropriate poster art, it displays another.
    Example: 300 movie art does not show up, instead it shows Batman art. Blade Runner art does not show up, instead it shows Batman art. That one Batman art will replace all of the movies down the line that do not load their art...
    Why does this do this? I've tried re-installing the application, re-adding all my movies on itunes, re-starting the app, everything I could think of.
    I just wish apple would make the video app a one place stop, the set up is nicer, quicker, and works better. Make Video App that comes with general apps, the remote to apple tv to play from ipad to apple TV!
    This is really a nit-picky thing, but when I had my ipad 3 w/retina, it did not have this issue, ipad 2 did not have this issue, only ipad mini... I love the mini too!! Fix this and you are a true warrior!
    Thanks community!

    OK, Problem solved. Software on Apple TV was VERY outdated. It had been sitting in the box for over a year and needed an update. Problem solved!

  • Updated Software on Itunes now phone stopped working

    Itunes asked to update phone software. Phone has stopped wotking just display USb cable connected to Itunes. Cant turn off phone not responding to any commands. cant turn off

    namesser wrote:
    I haven't made a backup of this ever. Didn't really know how and honestly I didn't expect this kind of crap from a Mac.
    I have had very reliable Macs.... one 11 year old one still gets used every day. But things happen...even to trusty Macs. Before I got DiskWarrior I had directory corruption so bad I lost eveything on the drive. It took me three months to re-enter all my Investment transactions from paper copies after an erase. DiskWarrior has always saved me since. But I learned to do the following so it would never happen again.
    I like the free demo of  SuperDuperto make clone backups. It's free,  Leopard and Snow ready and is easy to use. If you buy the full version you can do incremental backups.
    You should use Disk Utility to do a Disk Repair booted up on your install disk, before you make a clone of it. DiskWarrior is way better to use.
    I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition. 
    With a clone on an external FireWire drive (USB drives are not bootable on PPC Macs but are on some Intel Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on PPC Macs. Check the drive's manual to be sure.
       DALE

  • Since I upgraded to Yosemite the mail stop working

    since I upgraded to Yosemite the mail stop working
    The authentication always return to NTLM.
    All others email clients works fine.

    since I upgraded to Yosemite the mail stop working
    The authentication always return to NTLM.
    All others email clients works fine.

  • I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • Sort order in iPad's Remote app

    I have a few smart playlists in iTunes. When I control iTunes from my iPad's Remote app, some playlists show up (correctly) ordered by Album, other smart playlists are ordered by song. In iTunes (on my MacPro), though, both are ordered by album. Is there a way to control sort order in the Remote app's window?
    Thanks.

    I have the same problem. I converted my ipad incompatible videos - shot with my digital camera - to work with the iPad and got 2 identical event folders on my iPad with the same name.
    If I rename the event in iPhoto both events on my iPad are renamed but still split in photos and videos.
    Hope this will be fixed soon with an iPhoto or iTunes? update.
    Cheers,
    Steffmond

  • IPad mini mail app display rotation

    My iPad mini mail app rotation is locked.  No other app or display is affected.  How do I unlock?  How did it get locked?

    Sorry, I should have been clearer. I'm pretty familiar with how my ipad works. There appears to be a legit bug with the software, at least for some users. When I load mail, sometimes it's stuck in one orientation, even if the rest of the ipad apps are able to rotate freely. I don't always notice it because sometimes the ipad is oriented in the same direction as mail, but other times it's not and when you start the mail app, the screen loads upside down. Switch to another app, back to right side up and so on. You have to either turn the ipad over, or kill the mail app by double tapping the home button and ending the program from the list of running apps.
    After you do that, the mail app starts to rotate again normally when changing the orientation of the device. No reset is required, by the way, as is posted above - at least on mine. Killing the app alone is enough to 'fix' the problem.
    I've seen a number of posts where someone posts the 'fix' as a solution to this issue, but I don't consider it a reasonable resolution. Even if killing the mail app works, the problem just comes back a week or two later, very randomly. So then you end up having to do the 'fix' over and over again whenever the mail app flakes out.
    So, I'm wondering when Apple is going to actually fix this issue.

  • In my iPad mini some apps are not seen (voice recorder, calculator, compass etc)

    in my iPad mini some apps are not seen (voice recorder, calculator, compass etc)er

    Those apps aren't included in iOS on iPads
    iPad Mini built-in apps : http://www.apple.com/ipad-mini/built-in-apps/
    iPad manual (which has a chapter on each of the built-in apps) : http://support.apple.com/manuals/ipad/

  • I purchased an iPad mini on October 10th.  I want to return it and get the new ipad mini retina when it comes out.  How do I do that if the new ipad mini release date isn't until "later in November", which is beyond the 14 days from my purchase date?

    I purchased an iPad mini on October 10th.  I want to return it and get the new ipad mini retina when it comes out. I am currently still within the 14 day return/exchange window but how can I exchange it if the new ipad mini release date isn't until "later in November", which would be beyond the 14 days from my purchase date?  If apple announces a new version of a product you just purchased but won't actually release it for more than 14 days, how can you possibly exchange the one you just bought?  Is my only option to return the one I bought on the 10th (so return by 10/24) and then not have an iPad until the new one is available for purchase?  Or would it make any sense to return the one I bought, get a new one, which would presumably have another 14 day return window, and then exchange THAT one for the new ipad mini w/ retina when it comes out (hopefully within that second 14 day window)?

    Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

  • I have an Epson scanner that is apparently no longer supported  because it is a PowerPC app.  It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro.  Any suggestions on how I can continue to use it?

    I have an Epson scanner that is apparently no longer supported  because it is a PowerPC app.  It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro.  Any suggestions on how I can continue to use it?

    For that model, Epson has this information:
    ICA Scanner Driver
    07/17/12
    Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
    1. Connect the all-in-one or scanner to your Mac and power it on.
    2. Select the  menu, then Software Update.
    3. Follow the on-screen instructions to install the available updates.
    Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
    Compatible Systems: Mac OS X (v10.8.x)

  • How to transfer files from MacBook Pro pages app to iPad mini pages app?

    How to transfer files from MacBook Pro pages app to iPad mini pages app?

    The above assumes you are running current software.
    Mac - OX X 10.9.2, Pages 5.1.
    iPad - iOS 7.0.6, Pages 2.1.

  • Using ipad with remote app, I cannot change to watching a movie from listening to music through Apple TV without resetting the procedure. It only changes the song

    Using ipad with remote app, I cannot change to watching a movie from listening to music through Apple TV without resetting the procedure. It only changes the song

    it might be worth checking your TV settings to see if it has an option for different settings based on whether using the tv speakers or headphones.
    Normally you should be able to control the sound via the tv.
    Have you tried it without the headphones?

Maybe you are looking for